Ultrathin Keyboard Folio - Keyboard LOGITECH - Free user manual and instructions

Product type	Keyboard case for tablet
Dimensions (L x W x H)	240 x 185 x 15 mm
Weight	350 g
Power supply	2 CR2032 button cell batteries (included)
Battery life	Up to 3 months of normal use
Connectivity	Bluetooth 3.0
Bluetooth range	Up to 10 meters
Compatibility	iPad (2012-2015 models, depending on version)
Material	Polyurethane and aluminum
Color	Black
Keys	64 keys with iPad function keys
Main functions	Bluetooth keyboard, built-in protection, viewing stand
Care and cleaning	Clean with a soft, dry cloth. Do not use chemicals.
Safety	Do not expose to moisture or extreme temperatures. Keep out of reach of children.
Spare parts and repairability	Replaceable batteries. No other spare parts available. Not user-repairable.
General information	Brand: Logitech. Model: Ultrathin Keyboard Folio. Made in China.

Frequently Asked Questions - Ultrathin Keyboard Folio LOGITECH

How do I connect the keyboard to my iPad?

Enable Bluetooth on your iPad. Turn on the keyboard by pressing the power button. Press the pairing button (Bluetooth symbol) until the indicator flashes. Select 'Logitech Ultrathin' from the list of Bluetooth devices on your iPad.

Which iPad models are compatible?

The Ultrathin Keyboard Folio is compatible with iPad (3rd and 4th generation) and iPad Air (1st generation). Check compatibility based on your device size.

How do I replace the batteries?

Open the battery compartment located on the right side of the keyboard. Remove the old batteries and insert two new CR2032 batteries, respecting polarity. Close the compartment.

What should I do if the keyboard stops responding?

Make sure the batteries are installed correctly and are charged. Turn the keyboard off and on again. If the problem persists, delete the device from the iPad's Bluetooth list and perform a new pairing.

How do I clean the keyboard?

Use a slightly damp (not wet) soft cloth to wipe the keys and surface. Do not spray liquid directly on the keyboard. Avoid abrasive cleaners.

Can I use the keyboard with an iPhone or Android phone?

No, the Ultrathin Keyboard Folio is specifically designed for iPad. Its size and attachment mechanism are not suitable for smartphones.

How do I activate the iPad shortcut keys?

The function keys at the top of the keyboard (F1 to F12) are pre-programmed for iPad actions: brightness adjustment, volume control, screen lock, etc. No additional configuration is needed.

Is the keyboard water resistant?

No, the keyboard is not waterproof. Avoid any contact with liquids. In case of accidental spill, immediately turn off the keyboard, remove the batteries, and dry it thoroughly.

How do I use the keyboard in stand mode?

The case transforms into a stand: fold the back part to form a triangle and insert the iPad into the groove. You can then watch videos or type more comfortably.

Where can I find the complete manual?

The user manual is available for free download in PDF format on notice-facile.com for the Logitech Ultrathin Keyboard Folio.

USER MANUAL Ultrathin Keyboard Folio LOGITECH

Ultrathin Keyboard Folio

Protective case with integrated keyboard For Samsung GALAXY Tab4 10.1

Setup Guide

Contents

English 3 Deutsch 14 Français 26 Italiano 38 Español 50 Português 62 Nederlands 74 Svenska 86 Dansk 98

Norsk 110 Suomi 122 Ελληνικά 134 По-русски 146 Magyar 158 Česká verze 170 Po polsku 182 Türkçe 206 219 العربية

www.logitech.com/support/ultrathin-keyboard-folio-galaxy-tab-4

Know your product

3 English

Setting up the keyboard folio

Getting started

1. Open the keyboard folio and push your Samsung GALAXY Tab4 10.1 into the tablet holder:

1. Push your Samsung GALAXY Tab4 10.1 down into the hook:

1. Move the keyboard folio into the typing position by lifting the back of the protective folio and sliding the hook forwards until it aligns with the magnet:

Connecting your keyboard and tablet

The keyboard folio links to your tablet via a Bluetooth® connection. The first time you use the keyboard folio, you must pair the keyboard with your tablet.

1. Turn on the keyboard:

The status light blinks blue (fast blink) to indicate that the keyboard is discoverable, ready for pairing with your tablet. The first time you turn on the keyboard it remains discoverable for 15 minutes.

If the status light turns red, charge the battery. For more information, see "Charging the keyboard battery."

1. Make sure your tablet's Bluetooth feature is on.

From a Home screen, touch Apps → Settings → Network connections section, and turn on the Bluetooth switch.

1. Pair the keyboard folio with your tablet.

(i) In your tablet's Bluetooth settings page, select "Ultrathin Keyboard Folio S410" in the list of Available devices. (ii) When prompted, enter the PIN displayed using the folio keyboard.

When successful connection is made, the status light turns solid blue for a short time, and then turns off.

Connecting to another tablet

1. Make sure the keyboard is turned on.
2. Make sure your tablet's Bluetooth feature is on.

From a Home screen, touch Apps → Settings → Network connections section, and turn on the Bluetooth switch.

1. Press the Bluetooth Connect button:

The status light blinks blue (fast blink) to indicate that the keyboard is discoverable, ready for pairing with your tablet. The keyboard is discoverable for 3 minutes.

1. Pair the keyboard folio with your tablet.

(i) In your tablet's Bluetooth settings page, select "Ultrathin Keyboard Folio S410" in the list of Available devices. (ii) When prompted, enter the PIN displayed using the folio keyboard.

When successful connection is made, the status light turns solid blue for a short time, and then turns off.

Using the keyboard folio

Two viewing positions

The keyboard folio provides two viewing positions—one for typing and another for browsing.

To type:

1. Move the tablet holder into the typing position, aligning it with the built-in magnet to secure it:

Typing position

If the status light turns red, charge the battery. For more information, see "Charging the keyboard battery."

If you don't use the keyboard for a while in the typing position, it enters sleep mode automatically. Pressing any key wakes it.

To browse, place the tablet holder in the browsing position:

Browsing position

You can switch off the keyboard if you want to conserve battery power.

1. Turn on the keyboard:

Status light indicators

Bluetooth and battery status light

Light Description
Blinking green The battery is charging.
Green The battery is charged (more than 10%).
Red Battery power is low (less than 10%). Recharge the battery.
Blinking blue Fast: The keyboard is in discovery mode, ready for pairing.Slow: The keyboard is trying to reconnect to your Samsung GALAXY Tab4 10.1.
Solid blue Bluetooth pairing or reconnection is successful.

Function keys

Esc	FN + Back: Esc	Caps Lock	FN + Caps Lock: Quick panel/Notifications
1	FN + 1: Lock screenLock or unlock the tablet screen	Xx	FN + X: Cut
2	FN + 2: Web browser	C	FN + C: Copy
3	FN + 3: Mail	V	FN + V: Paste
4	FN + 4: Calendar
5	FN + 5: Music
6	FN + 6: Previous track		FN + Left cursor: Home
7	FN + 7: Play/Pause		FN + Right cursor: End
8	FN + 8: Next track		FN + Up cursor: Page Up
9	FN + 9: Mute		FN + Down cursor: Page Down
0	FN + 0: Volume down		FN + Search: Voice searchUse your voice to send messages, make calls, and more
	FN + -: Volume up
	FN + =: Print Screen		FN + Right Alt: AndroidTM menu
Delete	FN + Backspace: Forward delete		FN + Android home:Switch applications
Tab	FN + Tab: Show all apps		FN + spacebar: Switch language

Note: • To select a function key, press and hold the FN key, and then press the key indicated above.

Charging the keyboard battery

If the status light is red, the keyboard folio battery needs to be charged.

1. Plug one end of the micro-USB cable into the charging port, and the other end into a USB port on your computer.

The status light blinks green as the battery charges.

1. Charge the battery until the status light turns solid green.

Battery information

• A fully charged battery provides about three months of use when the keyboard is used about two hours a day.
• Charge the battery if the status light turns red briefly after the keyboard turns on.
• When not in use, turn off the keyboard to conserve battery power.
• The keyboard enters sleep mode automatically if not used for a while in the typing position. Press any key to wake it.

Battery disposal at product end of life

1. Pry off the top cover of the keyboard with a screwdriver.
2. Detach the battery from the circuit board and remove the battery.
3. Dispose of your product and its battery according to local laws.

When you've finished using the keyboard folio

Detaching your tablet

1. Release your tablet from the hook:

1. Slide your tablet out of the tab holders:

Your tablet is then released.

Storing your tablet for travel

1. Insert your tablet in the tablet holder.
2. Close the keyboard folio:

Visit Product Central

There's more information and support online for your product. Take a moment to visit Product Central to learn more about your new keyboard folio.

Browse online articles for setup help, usage tips, and information about additional features.

Connect with other users in our Community Forums to get advice, ask questions, and share solutions.

Find a wide selection of content including:

• Tutorials
• Troubleshooting
• Support community • Online documentation
• Warranty information
• Spare parts (when available)

Go to:

www.logitech.com/support/ultrathin-keyboard-folio-galaxy-tab-4

Troubleshooting

The keyboard does not work

• Press any key to wake the keyboard from sleep mode.
• Turn the keyboard off and then back on.
• Recharge the internal battery. For more information, see “Charging the keyboard battery.”
• Verify that Bluetooth is turned on in your tablet's settings (Apps → Settings – Network connections section – Bluetooth).
• Verify that "Ultrathin Keyboard Folio S410" is paired with your tablet (Apps → Settings - Network connections section - Bluetooth).
• Re-establish Bluetooth connection between the keyboard and your tablet by selecting “Ultrathin Keyboard Folio S410” in the list of Available devices. The status light on your keyboard turns solid blue when Bluetooth connection is established.

Thank you for purchasing our product. Please take a minute to tell us what you think of it.

www.logitech.com/ithink

Surf position

Product center

www.logitech.com/ithink

Configuration of the Keyboard Folio case

Typing position

Reading position

FN + 7: Play/Pause

Product pages

www.logitech.com/ithink

38 Italian

www.logitech.com/ithink

50 Spanish

12

How to remove the tablet.

www.logitech.com/ithink

62 Portuguese

Writing position

1. Turn on the keyboard:

www.logitech.com/ithink

Know your product

1. Push your Samsung GALAXY Tab4 10.1 into the clip:

Browsing position

FN + =: Print Screen

www.logitech.com/ithink

Product overview

1. Press the Samsung GALAXY Tab4 10.1 into the clip:

1. Start the keyboard:

www.logitech.com/ithink

98 Danish

1. Slide the Samsung GALAXY Tab4 10.1 down into the bracket:

When the status indicator blinks blue (fast blinks), the keyboard can be detected, and pairing with the tablet can be established. The keyboard can be detected for 3 minutes.

Input settings

Your tablet can now be removed.

Storing the tablet during travel

1. Insert the tablet into the holder.
2. Close the keyboard cover:

www.logitech.com/ithink

110 Norwegian

12

Configure Keyboard Folio

Getting started

1. Press Samsung GALAXY Tab4 10.1 down into the connector:

Using the Keyboard Folio

1. Turn on the keyboard:

FN + =: Print Screen

Fn + Backspace: Forward delete

Fn + Tab: Show all apps

FN + Caps Lock: Quick panel/notifications

FN + X: Cut

FN + C: Copy

FN + V: Paste

Fn + Left arrow: Home

Fn + Right arrow: End

Fn + Up arrow: Page Up

Fn + Page Down: Page Down

Fn + Search: Voice Search

1. Slide the tablet out of the tablet holders:

www.logitech.com/ithink

Know your product

1. Press the Samsung GALAXY Tab4 10.1 into the tablet holder.

FN + =: Print Screen

FN + Backspace:

www.logitech.com/ithink

Typing position

Browsing position

www.logitech.com/ithink

Typing position

www.logitech.com/ithink

FN + =: Print Screen

Product description

1. Snap the Samsung GALAXY Tab4 10.1 tablet into the hook:

Writing position

1. Turn on the keyboard:

FN + =: Print Screen

Get to know the device

1. Press the Samsung GALAXY Tab4 10.1 tablet into the catch:

Writing position

1. Turn on the keyboard:

FN + =: Print Screen

FN + Backspace:

Setting up the Keyboard Folio device

Getting started

1. Open the Keyboard Folio and insert the Samsung GALAXY Tab4 10.1 tablet into the holder:

1. Snap the Samsung GALAXY Tab4 10.1 tablet into the hook:

Writing position

1. Turn on the keyboard:

FN + =: Print Screen

FN + Backspace: Delete forward

If the status indicator lights up red, the keyboard folio battery needs to be recharged.

www.logitech.com/ithink

Get to know your product

Writing position

1. Turn on the keyboard:

Scanning position

www.logitech.com/ithink

1. Sam

On the hook:

Get to know the product

Home: FN + 4

Music: FN + 5

Laplace clip: FN + 6

Tablet 2 slots

Network connections (animations)

keyboard-folio-galaxy-tab-4

What do you think?

www.logitech.com/ithink

www.logitech.com

www.logitech.com/support/ultrathin-keyboard-folio-galaxy-tab-4

© 2014 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. Samsung, GALAXY and Tab4 are trademarks of Samsung Electronics Co., Ltd. Android, Google Play and Google Maps are trademarks of Google, Inc. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.

621-000347.002