Armor T40 - Smartphone iGET - Free user manual and instructions

Product Type	Smartphone
Brand	iGET
Model	Armor T40
Protection Rating	IP68 (water and dust resistant up to 1.5m for 1 hour)
Display	Tempered glass
Battery	Rechargeable lithium-ion
Charging Cable	Special extended plug required
Connectors	Micro USB, 3.5mm audio jack
Cameras	Front and rear cameras
Buttons	Power, Volume, Menu, Home, Back, Camera
SIM Card	Dual SIM
Memory Card Slot	microSD
Operating System	Android (assumed)
Approximate Weight	230 g
Approximate Dimensions	152 x 78 x 13 mm
Package Contents	Phone, battery, charger, headphones, USB cable
Warranty Period	24 months
Certification	CE
Safety Precautions	Do not use while driving, keep away from medical devices, avoid water ingress
Maintenance	Check cover tightness, dry after exposure to water

Frequently Asked Questions - Armor T40 iGET

Is the iGET Armor T40 waterproof?

The iGET Armor T40 has an IP68 certification, meaning it is water and dust resistant. However, it is not fully waterproof. It can withstand immersion up to 1.5 meters for up to 1 hour. Always ensure the covers are properly sealed after exposure.

What does IP68 rating mean?

IP68 stands for Ingress Protection. The '6' indicates complete dust protection, and the '8' indicates protection against continuous immersion in water beyond 1 meter. For this device, it is tested for 1.5 meters for 1 hour.

Can I use the phone underwater?

The manual advises not to leave the phone underwater for more than 1 hour or deeper than 1.5 meters. Additionally, after contact with water, you should dry the phone thoroughly. Using it underwater for extended periods is not recommended.

How do I install SIM cards and battery?

First, switch off the phone. Unscrew the fastening screws and open the back cover. Insert the SIM cards into the slots as shown, and slide the memory card into its slot. Insert the battery with contacts facing the phone contacts, then gently slide it until it locks. Attach the back cover until it clicks and screw it firmly. Check the cover tightness.

What type of charger is needed?

Due to the robust design, you must use a special cable with an extended plug for charging. The package includes a suitable charger and USB cable. Connect the adapter to the charger, then to a wall outlet. Do not force the connection.

Is the display prone to cracking?

The display is made of tempered glass for higher resistance, but it can crack if dropped on a hard surface or sharp object. Cracks due to mechanical damage or improper misuse are not covered by warranty.

What is the warranty period?

The standard warranty period is 24 months from the date of purchase, unless stated otherwise. The warranty card is included in the manual and must be filled by the dealer.

How do I switch the phone on/off?

Press and hold the ON button to switch on. To switch off, press and hold the ON button, select 'OFF' from the menu, and confirm by pressing OK. A short press of the ON button puts the phone into sleep mode.

What safety precautions should I follow?

Important precautions include: do not use while driving, avoid using at petrol stations, keep the phone at least 15 mm from your ear/body, avoid exposure to magnetic fields and extreme temperatures, and turn off in hospitals, airports, and near explosives. Do not dismantle the phone.

How should I clean and maintain the phone?

After contact with water or liquid, dry the phone thoroughly. Check that the openings for USB and headphones are closed properly and the battery cover is screwed firmly. Avoid using the phone in dusty or polluted environments. The phone contains a moisture detection label; if it turns red, warranty may be voided.

USER MANUAL Armor T40 iGET

Black and yellow portable device with 'iGET' branding and '80 MEGA' status indicator (no readable text beyond branding)

iGET ARMOR T40 USER MANUAL

Czech....3

Bulgarian....7

German....11

English 15

Hungarian 19

Lithuanian 23

Polish 27

Romanian....31

Russian....35

Slovak....39

Warranty card 43

Line drawings of two open mobile phones with visible internal circuitry and battery modules, hands adjusting the casing (no text or symbols)

Simple line icon showing an upward arrow inside a rectangular frame (no text or symbols)

Symbol of a trash bin crossed with no visible text or labels

Line drawing of two open mobile phones with hands adjusting their screens (no text or symbols visible)

Simple line icon of a document with an upward arrow, no text or symbols present

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

Line drawing of two open mobile phones with hands adjusting their screens (no text or symbols visible)

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

• Individual parameters, description by figures and design in the manual may differ depending on the version and updates.
• Printing errors reserved.
• Update your device as soon as a new version of software is available.

For the proper making of any complaint we advice to ask your dealer for filing up and confirming this warranty card including the statement of serial number of the product purchased, which must match the serial number, referred to as the proof of purchase and delivery note, as well as the purchased product. The warranty card is on the last pages of this manual.

Safety use:

• The iGET ARMOR T40 has an increased resistance. However, it is not mechanically undestroyable.
- The display is made of tempered glass, which ensures higher resistance. When dropped on a hard surface or sharp object, it may crack. The display cracked due to mechanical damage or improper misuse of the device is not covered by warranty.
- The iGET ARMOR T40 has the IP68 certification under 60529/ EU standard.
• The IP68 protection does not guarantee 100% resistance to water in all conditions.
• We do not recommend to leave the phone under water for more than 1 hour and deeper than 1.5 m.
• We also recommend that you let your phone dry after contact with water or other liquid.
- Be sure to check carefully the closed openings for the power adapter (USB cable) and headphones as well as the firm screwing of the battery cover. If moisture enters the device because of unsatisfactory "closure" of the phone, the warranty shall not be accepted.
- The warranty is not applied to an intentional damage to the phone.

Product description

1. Power button
2. Micro USB connector
3. Jack 3,5mm connector
4. Volume buttons

5. Earphone

6. Menu button

7. Home button
8. Back button
9. Front camera

10. Flashlight

11. Rear camera

12. Speaker
13. Camera button

The content of packaging:

iGET ARMOR T40, battery, battery charger, headphones, USB cable

Installing the SIM/micro card and battery

Switch your phone off before installing the card and the battery.

1. Unscrew the fastening screws.
2. Open the back cover of the phone.

Line drawing of two open mobile phones with visible internal circuitry and a hand adjusting the case (no text or symbols)

1. Set up the SIM card as shown on the phone and slide it slightly into the slots of the SIM cards.
2. Insert the memory card into the slot as shown on your device.

1. Insert the battery with the contacts facing the contacts on the phone. Slide gently the battery in until it locks.
2. Attach carefully the back cover to the phone until you hear it clicking at place and then screw it firmly.
3. Check the cover tightness.

Charging the battery

ATTENTION: Due to the robust design is for charging your phone must use a special cable with extended plug!

Before putting your phone into service you must recharge its battery.

1. Connect the adapter into the charger. Make sure that the adapter is inserted in the correct position. Do not use the force when connecting a plug.
2. Connect the charger to the wall outlet.
3. If the battery is fully charged, disconnect the phone from the charger.

Switching the phone on / off / sleep mode

Make sure that the phone has a SIM card and the battery is fully charged.

• Press the ON button to switch on the phone.
• Switch off the phone by pressing ON and select OFF. Confirm it by pressing OK.
• Press shortly ON button to switch the phone over to the sleep mode.

Safety Precautions

• Do not use your phone while driving
• Do not use your phone at the petrol stations.
• Hold the phone at least 15 mm from your ear and body.
• The phone produces a bright or flashing light.
• The small parts of the phone can cause suffocation.

- Do not expose your phone to open fire.

- The phone can produce a loud sound.

• The phone is not resistant to fillings.

- Avoid exposure to magnetic fields.

- Keep the phone away from medical devices.

- Avoid extreme temperatures.

- On request, turn off your phone in hospitals and other medical facilities.

- Keep the phone dry.

- On request, turn off the phone at airports and on planes.

- Do not dismantle the phone.

- Turn off the phone in the vicinity of explosive materials and chemicals.

- Use the phone only with certified equipment.

- Do not reckon only upon your phone during emergency situations.

- The phone contains a label that detects moisture. In case of moisture inside phone this label becomes red. The manufacturer has the right to reject a warranty with such a damaged phone.

Damages requiring professional repair

If such cases may occur, please, contact the authorized service or your distributor:

• Moisture got into the phone.
  • The phone is mechanically damaged.
  • The phone is extremely overheated.

1) For household use: The given symbol (crossed-out wheeled bin) on the product or at accompanying documents means that used electrical and electronic products should not disposed of with household waste. To ensure proper disposal of the product, hand it over to a designated collection point, where it will be accepted free of charge. The correct disposal of this product will help to save valuable natural resources and prevent any potential negative impacts on the environment and human health, which could otherwise be caused by inappropriate disposal of wastes. For more details, please, contact your local authorities or the nearest collection point. The improper disposal of this waste can be penalized in accordance with national regulations. Information for users to disposal of electrical and electronic devices (corporate and business use): For proper disposal of electrical and electronic devices, ask for details from your dealer or distributor. Information for users to disposal of electrical and electronic devices in other countries outside EU: The above mentioned symbol (crossed-out wheeled bin) is valid only in the countries of EU. For proper disposal of electrical and electronic devices, ask

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

for details from your authorities or dealer. All is expressed by the symbol of crossed-out wheeled bin on product, packaging or in printed materials.

2) Set up the claim for warranty repair of device at your dealer. If you have technical questions or problems, contact your dealer. Follow the rules for working with electrical equipment. The user may not dismantle the device or replace any part of this. Opening or removing the covers poses the risk of electric shock. In case of incorrect reassembly and subsequent connection you are also exposed to electric shock...

Declaration of Conformity:

Company Intelek spol. s.r.o. hereby declares that all T40 (S930) devices are in compliance with essential requirements and other relevant provisions of Directive 2004/108/EC.

CE1313 Ⓖ

The warranty period of the product is 24 months, unless stated otherwise. The Declaration of Conformity can be downloaded from the website - www.iget.eu.

This device can be used in the following countries:

AT	BE	CY	CZ	DK	EE	FI
MT	NL	PL	PT	SK	SI	ES
DE	GR	HU	IE	IT	LV	LT
GB	IS	LI	NO	CH	BG	RD
RU	RO	FR	SE	LU	TR

Restrictions on WiFi use

France – for indoor application it can use the whole frequency band of 2,400 MHz to 2,483.5 MHz (channels 1 – 13) for indoor application. For outdoor application it is possible to use only 2,400-2,545 MHz (channels 1-6).

Italy – the terms of the use of WIFI network are described in the so-called Code of Electronic Communication.

The maximum EIRP of wireless LAN

Frequency ranges	Indoor use	Outdoor use
2400 - 2446.5 MHz	10 mW	Not allowed
2446.5 - 2483.5 MHz	100 mW	100 mW on private land approved by the Ministry of Defense

Exclusive importer of iGET products to EU:

INTELEK spol. s r.o., Vlárská 22, 627 00 Brno

web: http://www.iget.eu

SUPPORT: http://www.iget.eu/helpdesk

Copyright © 2014 Intelek spol. s r.o. All rights reserved.

Használati útmutató

Line drawing of two open mobile phones with visible internal circuitry and battery modules, being handled by hands (no text or symbols)

Simple line drawing of a trash bin with crossed lines indicating no waste or discharge (no text or symbols)

Line drawing of two open mobile phones with visible internal circuitry and a hand inserting a plug into the phone (no text or symbols)

Symbol of a trash bin crossed with no text or labels

Line drawing of two open mobile phones with hands adjusting their internal circuitry (no text or symbols visible)

Symbol of a trash bin crossed with no visible text or labels

Line drawing of two open mobile phones with visible internal circuitry and battery modules, hands adjusting the casing (no text or symbols)

Simple line drawing of a trash bin with no text or symbols

EIRP Wireless LAN Maxim

Line drawing of two mobile phone cases with hands installing or adjusting the internal components (no text or symbols visible)

Simple line drawing of a document with an upward arrow inside, no text or symbols present

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

Line drawings of two mobile phones with visible internal circuitry and a hand inserting a plug (no text or symbols)

Simple line drawing of a document with an upward arrow inside, enclosed by a horizontal line (no text or symbols)

1. Vložte batériu tak, aby jej kontakty smerovali ku kontaktom na telefone. Jemne batériu zasuňte, až kým nezapadne na svoje miesto.
2. Opatrne pripevnite zadný kryt k telefónu, kým nebudete počut jeho zacvaknutie a znovu ho pevne zaskrutkujte.
3. Skontrolujte tesnost' krytu.

Nabíjanie batérie

Symbol of a trash bin crossed with no text or labels

Information for Customers about Warranty Terms and Conditions:

Warranty shall apply to defects of purchased product, found during its warranty period. When purchasing a particular product, please consider carefully what properties and functions you expect your product to have. The fact that purchased product shall not satisfy your later requirements shall not give any reason for complaint. Please, prior to the first use of this product read carefully its operating instructions and follow these instructions consistently.

We recommend you to keep original product packing during the warranty period for possible transport of the product in such a way so as to prevent any product damage during its transport and handling.

For the purpose of due application of any complaint about the product we recommend you to ask Seller to fill-in and confirm this Warranty Card including identification of serial number of purchased product, which shall comply with the serial number specified both in the document proving product purchase and delivery note and purchased product.

In this connection Customer hereby takes into account that unless this Warranty Card specifies serial number of purchased product, i.e., comparison of such serial number identified in the product with the serial number identified in this Warranty Card and document of product purchase/or delivery note shall not allow to confirm that particular product has come from Seller, in case of any doubts about the origin of such particular product Seller shall be entitled to automatically and without any other acts to reject the complaint of such goods.

Warranty shall not apply to:

• product damage suffered by unqualified installation of firmware or its modification;
• product damage by static electricity;
• product use for any other purposes than designed, described in attached operating instructions;
• damage to warranty seal of the producer, attached to the product;
• product damage inconsistent with the operating instructions, technical standards or safety regulations valid in the Czech Republic;
• product damage resulting from normal wear and tear;
• discharged batteries, decrease in battery capacity caused by its wear and tear;
• product defects caused by the use in dusty, polluted or in any other way dissatisfactory environment pursuant to attached operating instructions.

Wear and tear of the product and its components caused by their common use (discharged batteries, decreased capacity of accumulator, wear and tear of mechanical or displaying components, wear and tear of supply cables, headphones etc.) shall be subject neither to defect warranty nor quality warranty in the moment of take-over.

Furthermore, complaints about product parameters, not included in the operating instructions or in any commercial-technical documentation of Seller, related to the product, shall not be subject to quality warranty in the moment of take-over.

Proof of product purchase, or delivery note, shall constitute an integral part of this Warranty Card.