A8G MAX - Smartphone iGET - Free user manual and instructions

USER MANUAL A8G MAX iGET

Complete user guide can be found on our website in PDF format.

www.iget.eu

SUPPORT: http://www.iget.eu/helpdesk

Czech....3

Slovak....10

English....17

Polish....24

Warranty card....31

Základní informace:

Symbol of a trash bin with crossed lines indicating no waste or discharge, and a solid black rectangle below (no text or labels)

CZ

Symbol of a trash bin crossed with no text or numbers, representing waste sorting or disposal (no text present)

Individual technical parameters, the description of the phone and the design may differ depending on the different versions of the phone and updates. Precise specifications and other information can be found on website www.iget.eu.

Misprints reserved.

Update your device as soon as a new version of software is available.

The buyer is obliged to provide a serial number on the warranty card as well as in the delivery note and the proof of purchase. In this context, the buyer acknowledges that unless the serial number of goods is not marked on the proof of purchase, delivery note and in the warranty card and therefore it cannot be possible to compare this serial number marked on goods and its protective packaging with the serial number stated in the warranty card, delivery note and the proof of purchase and thus to verify that the goods runs from the seller, the service center is competent to claim such a goods automatically and reject it immediately. The buyer must instruct all persons to whom the goods would be subsequently sold. Product complaints do with your dealer if you are not on the web www.iget.eu indicated otherwise.

The warranty card is on the last pages of this manual.

Installing the SIM/micro card and battery:

Switch your phone off before installing the card

EN

and the battery.

1. Remove the back cover and battery.
2. Set up the SIM card as shown on the phone and slide it slightly into the slots of the SIM cards.
3. Insert the memory card into the slot as shown on your device.
4. Insert the battery with the contacts facing against the contacts on the phone. Slide gently the battery in until it locks. Remember to remove the cover from the battery contact if it is present.
5. Replace carefully the back cover of the phone, until you hear, it snaps.

Charging the battery:

Before putting your phone into service you must recharge its battery.

1. Connect the adapter into the charger. Make sure that the adapter is inserted in the correct position. Do not use the force when connecting a plug.
2. Connect the charger to the wall outlet.
3. If the battery is fully charged, disconnect the phone from the charger.

Switching the phone on / off / sleep mode:

Make sure that the phone has a SIM card and the

battery is fully charged.

• Press the ON button to switch on the phone.
• Switch off the phone by pressing ON and select OFF. Confirm it by pressing OK.
• Press shortly ON button to switch the phone over to the sleep mode.

Safety Precautions

• Do not use your phone while driving.
• Do not use your phone at the petrol stations.
• Hold the phone at least 15 mm from your ear and body.
• The phone produces a bright or flashing light.
• The small parts of the phone can cause suffocation.
• Do not expose your phone to open fire.
• The phone can produce a loud sound.
• The phone is not resistant to fillings.
• Avoid exposure to magnetic fields.
• Keep the phone away from medical devices.
• Avoid extreme temperatures (-10°C, +40°C).
• On request, turn off your phone in hospitals and other medical facilities.
• Keep the phone dry.
• On request, turn off the phone at airports and on planes.

EN

• Do not dismantle the phone.
• Turn off the phone in the vicinity of explosive materials and chemicals.
• Use the phone only with certified equipment.
• Do not reckon only upon your phone during emergency situations.
• The phone contains a label that detects moisture.
• In case of moisture inside phone/PCB this label becomes red. The manufacturer has the right to reject a warranty with such a damaged phone.
• In the event of any changes in the dimensions of the battery, discontinue use until pending replacing the battery with a new one.

Damages requiring professional repair

If such cases may occur, please, contact the authorized service or your distributor:

• Moisture got into the phone.
• The phone is mechanically damaged.
• The phone is extremely overheated.

For household use: The given symbol (crossed-out wheeled bin) on the product or at accompanying documents means that used electrical and electronic products should not disposed of with household waste. To ensure proper disposal of the product, hand it over to a designated collection point, where it will be accepted free of charge. The correct disposal of this product will help to save

valuable natural resources and prevent any potential negative impacts on the environment and human health, which could otherwise be caused by inappropriate disposal of wastes. For more details, please, contact your local authorities or the nearest collection point. The improper disposal of this waste can be penalized in accordance with national regulations. Information for users to disposal of electrical and electronic devices (corporate and business use): For proper disposal of electrical and electronic devices, ask for details from your dealer or distributor. Information for users to disposal of electrical and electronic devices in other countries outside EU: The above mentioned symbol (crossed-out wheeled bin) is valid only in the countries of EU. For proper disposal of electrical and electronic devices, ask for details from your authorities or dealer. All is expressed by the symbol of crossed-out wheeled bin on product, packaging or in printed materials.

Simple line drawing of a trash bin with crossed lines indicating no waste or discharge (no text or symbols)

Set up the claim for warranty repair of device at your dealer. If you have technical questions or problems, contact your dealer. Follow the rules for working with electrical equipment. The user may not dismantle the device or replace any part of this. Opening or removing the covers poses the risk of electric shock. In case of incorrect reassembly and subsequent connection you are also exposed to electric shock.

Declaration of Conformity:

Company Intelek spol. s r.o. hereby declares that all A8G MAX (A8 MAX) devices are in compliance with essential requirements and other relevant provisions of Directive 1999/5/EC.

C € 0700

The warranty period of the product is 24 months, unless stated otherwise. The Declaration of Conformity can be downloaded from the website - www.iget.eu.

This device can be used in the following countries:

AT	BE	CY	CZ	DK	EE	FI
MT	NL	PL	PT	SK	SI	ES
DE	GR	HU	IE	IT	LV	LT
GB	IS	LI	NO	CH	BG	RD
RU	RO	FR	SE	LU	TR

Restrictions on WiFi use:

Italy – the terms of the use of WIFI network are described in the so-called Code of Electronic Communication.

The maximum EIRP of wireless LAN

Frequency ranges	Indoor use	Outdoor use
2400 - 2446.5 MHz	10 mW	Not allowed
2446.5 - 2483.5 MHz	100 mW	100 mW on private land approved by the Ministry of Defense

Exclusive importer of iGET products to EU: INTELEK spol. s r.o., Ericha Roučky 1291/4, 627 00 Brno - Černovice, CZ

Web: http://www.iget.eu

SUPPORT: http://www.iget.eu/helpdesk

Copyright © 2016 Intelek spol. s r.o. All rights reserved.

Instrukcja:

Symbol of a trash bin crossed with two crossed lines, no text or numbers present

Serial / Batch number: (S/N)

Date of sale:

Warranty until:

Sale document number:

Seal of the store:

Information for Customers about Warranty Terms and Conditions:

Warranty shall apply to defects of purchased product, found during its warranty period. When purchasing a particular product, please consider carefully what properties and functions you expect your product to have. The fact that purchased product shall not satisfy your later requirements shall not give any reason for complaint. Please, prior to the first use of this product read carefully its operating instructions and follow these instructions consistently. We recommend you to keep original product packing during the warranty period for possible transport of the product in such a way so as to prevent any product

WARRANTY CARD

damage during its transport and handling.

For the purpose of due application of any complaint about the product we recommend you to ask Seller to fill-in and confirm this Warranty Card including identification of serial number of purchased product, which shall comply with the serial number specified both in the document proving product purchase and delivery note and purchased product. In this connection Customer hereby takes into account that unless this Warranty Card specifies serial number of purchased product, i.e., comparison of such serial number identified in the product with the serial number identified in this Warranty Card and document of product purchase/or delivery note shall not allow to confirm that particular product has come from Seller, in case of any doubts about the origin of such particular product Seller shall be entitled to automatically and without any other acts to reject the complaint of such goods.

Warranty shall not apply to:

product damage suffered by unqualified installation of firmware or its modification;

product damage by static electricity;

product use for any other purposes than designed, described in attached operating instructions;

damage to warranty seal of the producer, attached to the product;

product damage inconsistent with the operating instructions, technical standards or safety regulations valid in the Czech Republic;

product damage resulting from normal wear and tear;

discharged batteries, decrease in battery capacity caused by its wear and tear;

product defects caused by the use in dusty, polluted or in any other way dissatisfactory environment pursuant to attached operating instructions.

WARRANTY CARD

Wear and tear of the product and its components caused by their common use (discharged batteries, decreased capacity of accumulator, wear and tear of mechanical or displaying components, wear and tear of supply cables, headphones etc.) shall be subject neither to defect warranty nor quality warranty in the moment of take-over.

Furthermore, complaints about product parameters, not included in the operating instructions or in any commercial-technical documentation of Seller, related to the product, shall not be subject to quality warranty in the moment of take-over.

In the event of any changes in the dimensions of the battery, discontinue use, and until there is a change the battery with a new one.

Proof of product purchase, or delivery note, shall constitute an integral part of this Warranty Card.