VT-1203 GY - Iron Vitek - Free user manual and instructions

Product type	Iron
Brand	Vitek
Model	VT-1203 GY
Power supply	220-240 V ~ 50 Hz
Power consumption	1850-2200 W
Water tank capacity	Max level indicated (exact capacity not specified)
Soleplate type	Not specified
Temperature settings	Low (synthetics), medium (silk/wool), high (cotton/linen), max
Steam control	Steam supply regulator (variable), additional steam burst button
Spray function	Yes, spray button
Anti-drip function	Yes, anti-drop valve prevents water leakage at low temperature
Self-cleaning	Yes, self-clean button for steam chamber
Dry ironing	Yes
Steam ironing	Yes, at high temperature (●●● or max)
Vertical steaming	Not specified
Cord length	Not specified
Weight	Not specified
Dimensions	Not specified
Automatic shut-off	Not specified
Water level indicator	Yes, maximal water level indication (12)
Safety features	Overheat protection (implied), anti-drip, cool-down before storage
Cleaning	Wipe outer surface with damp cloth; clean soleplate with vinegar-water solution; do not use abrasives
Storage	Vertical position, empty water tank, cool completely

Frequently Asked Questions - VT-1203 GY Vitek

How do I fill the water tank?

Ensure the iron is unplugged. Set the steam regulator to OFF. Open the water tank lid, fill with water up to the MAX mark, and close the lid. Do not exceed the MAX level.

What type of water should I use?

Use regular tap water. If water is hard, mix with distilled water in a 1:1 ratio; for very hard water, use 1:2 ratio or only distilled water. Do not use scented liquids, vinegar, starch, or descaling agents.

How do I set the ironing temperature?

Place the iron on its base. Plug in and turn the temperature regulator (11) to the desired setting: • for synthetics, •• for silk/wool, ••• for cotton/linen, or max. Wait for the indicator light to go out before starting.

Can I use steam at any temperature?

No, steam ironing requires the temperature regulator set to ••• or MAX. The anti-drip valve prevents water dripping at lower temperatures.

How do I use the additional steam burst?

Use only at high temperatures (••• or max). Press the additional steam release button (5) with 4-5 second intervals to avoid water leakage.

How do I clean the steam chamber?

Set steam to OFF, fill water to MAX, plug in, set temperature to max. When ready, unplug, hold over sink, and press and hold the self-clean button (14). Sway the iron until water drains. Then let it cool and wipe dry.

How do I clean the soleplate?

Allow the iron to cool completely. Wipe the soleplate with a cloth soaked in vinegar-water solution to remove sediment, then polish with a dry cloth. Do not use abrasive substances or sharp objects.

What safety precautions should I take?

Always unplug before filling or cleaning. Do not immerse in water. Avoid contact with hot surfaces. Keep away from children. Unplug when not in use. Do not use if cord is damaged.

How should I store the iron?

Turn temperature to MIN, set steam to OFF. Unplug, open water tank lid, pour out remaining water, close lid. Let it cool completely, then store vertically in a dry cool place out of children's reach.

What should I do if steam is not produced?

Check that the temperature regulator is set to ••• or MAX. Ensure there is enough water in the tank and that the steam regulator is not in OFF position.

USER MANUAL VT-1203 GY Vitek

1. Water spray nozzle
2. Water tank lid
3. Steam supply regulator
4. Spray button
5. Additional steam release button
6. Handle
7. Power cord protection
8. Base
9. Heating element on/off indication
10. Water tank
11. Temperature regulator
12. Maximal water level indication
13. Iron soleplate
14. Self clean button
15. Measuring cup

SAFETY MEASURES

Before using the unit, please read the instructions carefully and pay attention to the illustrations.

• Before switching on the unit, make sure that your home electricity supply corresponds to the voltage of current specified on the unit.
• Power cord is equipped with a euro plug; insert it into the socket, with secure grounding.
• In order to avoid risk of fire do not use adapters while connecting the appliance to the outlet.
• In order to avoid overloading of the power network do not switch on several appliances with high power consumption simultaneously.
• Use the unit only for the intended purposes.
• Use the iron only on the ironing board.
• Place the iron on a flat stable surface.
  • Always unplug the unit while filling the water tank with water.

• While using the unit, make sure that the water tank lid is firmly closed.

• Close supervision is necessary when children or infirm persons are near the unit.

• Never leave the working unit unattended.
  • Always unplug the unit if you do not use it.
• In order to avoid electric shock do not immerse the unit into water or other liquids.
• Do not fill the water tank with scented liquids, vinegar, starch solution, descaling reagents, chemical agents etc.
• Avoid contact with hot surfaces or outgoing steam of the iron in order to avoid getting burns.
• Make sure that the power cord is not hanging over the edge of the ironing board and make sure that it does not touch heated surfaces.
• To unplug the unit always take it by the plug, do not pull by the power cord.
• Before taking the unit away for storage, pour out the remaining water and let the unit cool down.
• Pour out water only after you have unplugged the unit.
• Do not use the unit if the plug or the power cord is damaged or if there are other damages in the unit.
• In order to avoid electric shock do not repair the unit yourself. If there are some damages in the unit apply to the authorized service center.

BEFORE USAGE

• Take out the iron from the package and remove the protective cartoon covering from the iron soleplate (13).
- Make sure that the electrical supply voltage corresponds to the iron's operating voltage.

Note:

The iron's heating element is broken in during the first use; it is normal for a small amount of smoke to be released.

ENGLISH

CHOICE OF WATER

- To fill the water tank use regular tap water. If the water is hard then it is recommended to mix it with distilled water at a ratio of 1:1, if the water is very hard, mix it with distilled water at a ratio of 1:2 or use only distilled water.

Note:

Do not fill the water tank (10) with scented liquids, vinegar, starch solutions, descaling reagents, chemical substances etc.

FILLING THE WATER TANK

Make sure that the iron is disconnected from electrical power before filling it with water.

• Set the steam release regulator (3) to the position of steam vapor OFF.
• Open the water tank lid (2).
• Fill the water tank (10) with water. Close the lid (2).

Note:

• Do not fill it with water above MAX. indication.
• If you need to refill the water tank during ironing, turn off the iron and unplug the power cord from the outlet.
• When you finish ironing, open the water tank lid (2) and pour out the remaining water.

IRONING TEMPERATURE

Before ironing test the heated iron on the old cloth to be sure that the iron soleplate (13) and the water tank (10) are clean.

• Always check the recommended iron temperature indicated on the tag before ironing.
- If the tag does not list the recommended ironing temperature, but you know the type of fabric, then use the following table to determine the proper temperature.

Determination of Fabric type/temperature

•	Synthetics, nylon, acryl, polyester(low temperature)
••	Silk/wool (medium temperature)
•••	Cotton/linen (high temperature)

• This table is only for smooth materials. Fabrics of other types (crimped, raised etc.) are best ironed at low temperature.
• First sort items by ironing temperature: wool with wool, cotton with cotton etc.
• The iron heats up faster than it cools down. For this reason it is recommended to begin ironing at low temperature (for instance synthetic fabrics). After that, move to higher ironing temperature. Cotton and linen should be ironed after all the others.
• If an item is made from a mix of fabrics, then the iron should be set for the fabric with the lowest ironing to (for instance if an item is made from 60% polyester and 40% cotton, it should be ironed at the temperature used for ironing polyester “•”).
• If you cannot define the fabric the item is made from, find a place on it that is hidden while wearing and, on practice select the ironing temperature (always start at the lowest and gradually raise it until you get the desired result.)
• Corduroy and other fabrics that start glossy quickly should be ironed strictly in one direction (along the lines) with slight pressure.
• To avoid appearance of glossy spots on the synthetic and silk fabrics, iron them back-side.

SETTING THE IRONING TEMPERATURE

• Place the iron on the base (8).
• Insert the power plug into the outlet.
• Set the temperature regulator (11) to the required ironing temperature: “•”, “••”, “•••” or “max” (depending on the type of fabric), the (9) indicator will light up.

ENGLISH

- When the soleplate temperature (13) reaches the desired temperature point, the (9) indicator will go out, you can start ironing.

Note:

While steam ironing set the temperature «•••» or «MAX».

WATER SPRAYER

• You can dampen the fabric by pressing the spray button (4) several times.
• Make sure that there is enough water in the water tank (10).

IRONING

• Place the iron on the base (8).
• Insert the power plug into the outlet.
• Set the temperature regulator (11) to the required ironing temperature: “•”, “••”, “•••” or “max” (depending on the type of fabric), the (9) indicator will light up.

- When the soleplate temperature (1 reaches the desired temperature point, the (9) indicator will go out, you can start ironing.

- When you finish ironing set the (11) regulator to the "min" position.

- Pull the plug out of the socket and let the iron cool down completely.

STEAM IRONING

For steam ironing set the temperature regulator to «●●●» or «MAX». The iron has an anti-drop valve, which stops water supply, when the soleplate temperature is too low it prevents the appearance of drops out of the soleplate openings (13). While heating or cooling down of the soleplate (13), you will hear clicks of opening/closing of the anti-drop valve it means that the valve works normally.

• Place the iron on the base (8).
• Insert the power plug into the outlet.

• Make sure that there is enough water in the water tank (10).

• Set the temperature regulator (11) to the required ironing temperature: “●●●” or “max”, the (9) indicator will light up.

• When the soleplate temperature (13) reaches the desired temperature point, the (9) indicator will go out, you can start ironing.
• Turn the steam supply regulator (3) to set the intensity of steaming, steam will start outgoing from the openings of the sole-plate (13).
• When you finish ironing set the (11) regulator to the "min" position and the steam supply regulator (3) to the left position.
• Pull the plug out of the socket and let the iron cool down completely.

ATTENTION!

If during the operation steam is not constantly supplied, check whether the temperature regulator (11) is set properly.

ADDITIONAL STEAM RELEASE

Additional steam release function is useful when ironing folds and can only be used at high ironing temperatures (when the iron temperature regulator (11) is set to “•••” or “max”).

- When the additional steam release button (5) is pressed, steam will be vigorously released from the openings in the iron soleplate.

Note: In order to avoid leakage of water from steam openings, press the additional steam supply button (5) with 4-5 sec. interval.

STEAM CHAMBER CLEANING

To prolong lifetime of the iron we recommend cleaning the steam chamber, especially in the regions with “hard” water.

• Set the steam supply regulator (3) to the steam release OFF position.
• Fill the water tank (10) till the MAX mark (12).

ENGLISH

• Put the iron on the base (8).
• Insert the power plug into the outlet.
• Set the temperature regulator (11) to the MAX. temperature: "max" the (9) indicator will light up.
• When the soleplate temperature (13) reaches the desired temperature point, the (9) indicator will go out, you can start cleaning of the iron chamber.
• Unplug the iron, set the temperature regulator (11) to the «MIN» position.
• Pull the plug out of the socket.
• Hold the iron above the sink, press and hold the button (14).
• Boiling water together with scale will be throwing out from the openings in the iron soleplate (13).
• Slightly sway the iron back and forth, until water goes out of the water tank (10).
• Place the iron on the base (8) and let it cool down completely.
• When the soleplate (13) cools down completely, wipe it with a dry cloth.
• Before you take the iron for storing, make sure that there is no water in the water tank (10) and that the iron soleplate (13) is completely dry.

CARE AND CLEANING

• Before cleaning the iron, make sure that it is turned off and has cooled completely.
• Wipe the iron's outer surface with a damp cloth and then wipe dry.
• Sediment on the iron soleplate can be removed with a cloth soaked in vinegar-water solution.
• After removing sediment, polish the sole-plate with a dry cloth.
• Do not use abrasive substances to clean the soleplate and body of the iron.
• Avoid touching the iron soleplate with sharp metal objects.

STORAGE

- Turn the temperature regulator (11) anticlockwise till MIN position, set the steam

release regulator (3) to the steam release OFF position.

• Remove the power plug from the outlet.
• Open the water tank lid (2), turn over the iron and pour out any remaining water from the water tank (10).
• Close the lid (2).
• Set the iron vertically and allow it to cool completely.
• Keep the iron at dry cool place in vertical position out of the reach of children.

TECHNICAL CHARACTERISTICS

Power requirements: 220-240 V \~ 50 Hz

Power consumption: 1850-2200 W

Specifications subject to change without prior notice.

MINIMUM SERVICE LIFE - 3 YEARS

GUARANTEE

Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

This product conforms to the EMC-Requirements as laid down by the Council Directive 89/336/EEC and to the Law Voltage Regulation (73/23 EEC)

DEUTSCH

BÜGELEISEN

BESCHREIBUNG

A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four figures indicating the production date. For example, serial number 0606xxxxxxx means that the item was manufactured in June (the sixth month) 2006.

DE