SH1110 - Razor Zelmer - Free user manual and instructions

Product Type	Electric Foil Shaver
Model	SH1110
Brand	Zelmer
Power Source	Rechargeable battery (2 x Ni-MH 650 mAh)
Charging Time	8 hours (first charge 16 hours)
Cordless Operating Time	Approximately 35 minutes
Input Voltage	100-240 V AC via adaptor
Trimmer	Built-in pop-up trimmer
Washable	Yes (head only, when unplugged)
Blade System	Outer foil and inner blade set
Battery Type	Nickel-Metal Hydride (Ni-MH)
Battery Life	Approximately 4 years (weekly charging)
Weight	Approx. 200 g
Material	Plastic body
Accessories Included	Cleaning brush, protective cap, oil
Replacement Parts	Foil and blade set SH1110111
Usage	For facial hair only
Cleaning	Under running water or with brush
Maintenance	Oil blades regularly
Safety	Includes lock button to prevent accidental operation
Warranty	Standard manufacturer warranty

Frequently Asked Questions - SH1110 Zelmer

How long does the battery last before needing a recharge?

A fully charged battery provides approximately 35 minutes of cordless shaving.

How do I charge the shaver?

Turn off the shaver, connect the AC adaptor to the shaver and a 100-240 V outlet. The green indicator lights during charging. Full charge takes about 8 hours.

What is the 'memory effect' and how can I avoid it?

The memory effect reduces battery capacity if you recharge before the battery is empty. To avoid it, always completely drain the battery before recharging. If affected, fully drain and recharge for 16 hours 2-3 times.

Can I wash the shaver under running water?

Yes, the shaver is washable but only when unplugged. Remove the foil unit and rinse the blades under cold or lukewarm water. Dry thoroughly.

How often should I replace the foil and blade?

For optimal performance, replace the outer foil and inner blade at least once a year. If you notice poor shaving or damage, replace them immediately. Use original Zelmer set SH1110111.

Can I use shaving cream or foam with this shaver?

Yes, you can use soap or shaving foam when operating on battery. After use, wash the shaver under running water and apply oil.

How do I use the trimmer?

Slide the trimmer button upwards to extend the trimmer. Apply it at a right angle to the skin and move gently downwards for sideburns or detail trimming.

What is the lock button for?

The lock button prevents accidental activation. You must press it while sliding the ON/OFF switch to turn the shaver on or off.

How should I store the shaver?

Store the shaver in a dry place at room temperature. Always put the protective cap on after cleaning. Avoid direct sunlight and high humidity.

What should I do if the shaver stops working?

First, ensure it's charged. If the problem persists, check that the foil and blade are properly fitted. If still not working, contact a Zelmer service center. Do not attempt to repair yourself.

USER MANUAL SH1110 Zelmer

Close-up of a metallic cylindrical object with a central oval and a small circular base (no text or symbols visible)

CHARGE

zelmer

PL ZASILANIE AKUMULATOROWE
CZ BATERIOVÉ NAPÁJENÍ
SK AKUMULÁTOROVÉ NABÍJANIE
HU AKKUMULÁTOROS TÖLTÉS
RO ALIMENTARE CU ACUMULATOR
RU АККУМУЛЯТОРНОЕ ПИТАНИЕ
BG АКУМУЛАТОРНО ЗАХРАНВАНЕ
UA АКУМУЛЯТОРНЕ ЖИВЛЕННЯ
EN BATTERY OPERATED

PL CZAS PRACY BEZPRZEWODOWEJ - 35 MINUT
CZ BEZŠNÜROVÉ POUŽITÍ - 35 MINUT
SK POUŽITIE BEZ PRÍVODNÉHO KÁBLA - 35 MINÚT
HU CSATLAKOZÁSMENTES KÉSZENLÉT - 35 PERC
RO DURATĂ DE FUNCTIONARE FĂRĂ CABLU - 35 MINUTE
RU ВРЕМЯ БЕСПРОВОДНОЙ РАБОТЫ - 35 МИНУТ
BG ВРЕМЕ НА БЕЗКАБЕЛНА РАБОТА - 35 МИНУТИ
UA ЧАС БЕЗПРОВІДНОЇ РОБОТИ - 35 ХВ.
EN CORDLESS MODE - 35 MINUTES

PL CZAS LADOWANIA - 8 H
CZ DOBA NABÍJENÍ - 8 H
SK DOBA NABÍJANIA - 8 H
HU TÖLTÉSI IDŐ - 8 H
RO TIMP ÎNCĂRCARE - 8 H
RU ВРЕМЯ ЗАРЯДКИ - 8 Ч.
BG ВРЕМЕ НА ЗАРЕЖДАНЕ - 8 Ч.
UA ЧАС ЗАРЯДКИ - 8 ГОД.
EN CHARGING TIME - 8 H

PL TRYMER
CZ ZASTŘIHOVAČ
SK HOLIACI STROJČEK
FU TRIMMER
RO TRIMMER
RU ТРИММЕР
BG ТРИМЕР
UA TRIMER
EN TRIMMER

Szanowni Klienci!

Line drawing of a handheld device with internal components (no text or symbols)

Przycisk blokady

Przełącznik ON/OFF

(włącz/wyłącz)

Diagram of a toilet with an upward arrow indicating airflow or pressure direction (no text or symbols)

Suwak trymera

Illustration of a hand holding a device with arrows indicating motion or force (no text or symbols)

Illustration of a hand holding a medical device with arrows indicating force or movement (no text or symbols present)

Line drawing of a pair of hairbrushes with motion lines indicating movement (no text or symbols)

Diagram showing a hand holding a device with a magnified view of the component (no text or symbols present)

Illustration of hands holding a mechanical component (no text or symbols visible)

Folia tnąca

Illustration of a hand inserting a small object into a device labeled 'Korpus' (no other text or symbols)

Korpus

Diagram showing a hand pressing down on a mechanical component with a valve (no text or symbols present)

Diagram showing a hand holding a cylindrical object being processed into a mechanical component (no text or symbols present)

Simple line drawing of a cylindrical object with two horizontal bars, no text or symbols present.

Zespół folii tnącej

Blok ostrzy

Zespół folii tnącej

Diagram showing two hands performing a mechanical manipulation or disassembly process (no text or symbols present)

Blok ostrzy

Diagram showing two hands performing a mechanical press or clamp operation (no text or symbols present)

rys. 2

Diagram showing a hand pressing down on a mechanical component with an upward arrow (no text or symbols)

Symbol of a trash bin with crossed lines indicating no waste, and a solid black rectangle below (no text or labels)

Diagram of a toilet with an upward arrow indicating airflow or pressure direction (no text or symbols)

Jezdec zastřihovače

Illustration of a hand holding a device with a close-up view of its grip (no text or symbols)

Illustration of a hand holding a medical device with arrows indicating force or movement (no text or symbols present)

Line drawing of a pair of hairbrushes with motion lines indicating movement (no text or symbols)

Diagram showing a hand holding a device above a device with a mechanical component below (no text or symbols)

Diagram showing a mechanical component with an upward arrow, no text or symbols present

Illustration of hands holding a mechanical component (no text or symbols visible)

Holící planžeta

Diagram showing a hand holding a small object above a mechanical component (no text or symbols present)

Diagram showing a hand holding a wrist with a mechanical component being inserted (no text or symbols present)

Simple line drawing of a cylindrical object with a rectangular top and side supports (no text or symbols)

Holící planžeta

Břitový blok

Holící planžety

Diagram showing two hands performing a mechanical assembly with arrows indicating direction (no text or symbols)

obr. 1

Diagram showing two hands performing a mechanical manipulation or tool operation (no text or symbols present)

obr. 2

Diagram showing a hand pressing down on a mechanical component with an arrow indicating motion (no text or symbols)

Symbol of a trash bin with crossed x- and y-axes, no text or labels present

Line drawing of a handheld device with internal components and no visible text or symbols

Blokovacie tlačidlo

Spínač ON/OFF (zapni /vypni)

② Holiacu planžetu jemne pritlačte k Vašej pokožke pod priamym uhlom, natiahnite pokožku a holiaci strojček opatrne posúvajte smerom nahor, proti rastu chípkov.

Diagram of a toilet with an upward arrow indicating airflow or pressure direction (no text or symbols)

Illustration of a hand holding a device with arrows indicating motion or force (no text or symbols)

Illustration of a hand holding a medical device with arrows indicating force or movement (no text or symbols present)

Line drawing of a pair of hairbrushes with motion lines indicating movement (no text or symbols)

Diagram showing a hand holding a device with a downward arrow indicating process (no text or symbols present)

④ Sústavu holiacich čepelí nasad'te na predošlé miesto tak, aby ste sa nedotkli holiacej planžety.

⑤ Aplikujte olej na čepele planžety a zastrihávača.

Illustration of hands holding a mechanical component (no text or symbols visible)

Holiaca planžeta

Illustration of a hand inserting a small object into a device (no text or symbols visible)

Teleso

Diagram showing a hand pressing down on a mechanical component with a valve (no text or symbols present)

Diagram showing a hand holding a wrist with a mechanical component being inserted (no text or symbols present)

Simple line drawing of a cylindrical object with two horizontal bands (no text or symbols)

Diagram showing two hands performing a mechanical manipulation or disassembly process (no text or symbols present)

obr. 1

Illustration of a hand holding a mechanical component with arrows indicating movement or force direction (no text or symbols)

obr. 2

Diagram showing a hand holding a tool above a mechanical component with an arrow indicating motion (no text or symbols)

Symbol of a trash bin with crossed x- and y-axes, no text or labels present

Technical line drawing of a handheld device with internal components (no text or symbols)

A retesz gombja

ON/OFF (ki/be)

kapcsoló

Diagram of a toilet with an upward arrow indicating airflow or pressure direction (no text or symbols)

Illustration of a hand holding a device with arrows indicating motion or force, no text or symbols present

Illustration of a hand holding a tool with a screwdriver inserted, showing mechanical assembly (no text or symbols)

Diagram showing a hand holding a device with a downward arrow indicating process (no text or symbols present)

Line drawing of a hand holding a small object with motion lines indicating movement (no text or symbols)

Diagram showing a mechanical component with an upward arrow, no text or symbols present

Illustration of hands holding a mechanical component (no text or symbols visible)

Line drawing of a hand inserting a small object into a container (no text or symbols)

Diagram showing a hand pressing down on a mechanical component (no text or symbols present)

Illustration showing a hand holding a device with a mechanical component below (no text or symbols)

Simple line drawing of a cylindrical object with a shaded top section (no text or symbols)

Vágófólia egység

Kések blokkja

Vágófólia egység

Diagram showing two hands performing a mechanical manipulation or tool operation (no text or symbols present)

Kések blokkja

Diagram showing two hands performing a mechanical manipulation or tool operation (no text or symbols present)

1. ábra
   

Diagram showing a hand pressing down on a mechanical component with an upward arrow (no text or symbols)

Symbol of a trash bin with crossed lines indicating no waste, and a solid black rectangle below (no text or labels)

Line drawing of a handheld device with a screen and handle (no text or symbols)

Cap ras
Lame trymer
Fermoar trymer

Simple line drawing of a spherical object with internal components and a diagonal line (no text or symbols)

Simple diagram with vertical lines and a central oval shape, no text or symbols present

Line drawing of a handheld device with internal components (no text or symbols)

Butonul blocadei

Diagram of a medical device with an upward arrow indicating a process or movement (no text or symbols present)

Fermoar trymer

Illustration of a hand holding a tool with arrows indicating motion or force (no text or symbols)

Illustration of a hand holding a tool with a magnified inset showing the handle and grip (no text or symbols)

Line drawing of a hairbrush with motion lines indicating brush movement (no text or symbols)

Diagram showing a hand holding a device with a downward arrow indicating process (no text or symbols present)

Illustration of hands holding a mechanical component (no text or symbols visible)

Folia tde täiere

Line drawing of a hand inserting a component into a tissue sample labeled 'Corpul' (no other text or symbols)

Diagram showing a hand holding a spring above a mechanical component (no text or symbols)

Diagram showing a mechanical assembly process with a component being inserted into a base (no text or symbols present)

Simple line drawing of a cylindrical object with a shaded top layer and mounting holes (no text or symbols)

Diagram showing two hands performing a mechanical press or clamp operation, with arrows indicating direction (no text or symbols present)

Blocul de lame

Symbol of a trash bin with crossed x and y axes, no text or labels present

Line drawing of a handheld device with internal components and arrows indicating motion (no text or symbols)

Кнопка блокировки

Diagram of a medical device with an upward arrow indicating a process or insertion (no text or symbols present)

Регулятор триммера

Illustration of a hand holding a tool with arrows indicating motion or force, no text or symbols present

Illustration of a hand holding a tool with arrows indicating movement or force (no text or symbols present)

Diagram showing a hand holding a device with a downward arrow indicating process (no text or symbols present)

Line drawing of a pair of electric shakers with motion lines indicating movement (no text or symbols)

Illustration of hands holding a mechanical component (no text or symbols visible)

Режущая сетка

Diagram showing a hand pressing down on a mechanical component with a valve (no text or symbols present)

Diagram showing a mechanical assembly process with a component being inserted into a base (no text or symbols present)

Simple line drawing of a cylindrical object with a rectangular top and side mounting holes (no text or symbols)

Illustration of a hand holding a device with arrows indicating movement or force (no text or symbols)

Система лезвий

Diagram showing a hand holding a device with arrows indicating movement or force direction (no text or symbols present)

рис. 2

Diagram showing a hand pressing down on a mechanical component with an arrow indicating motion (no text or symbols present)

Symbol of a trash bin with crossed lines indicating no waste, and a solid black rectangle below (no text or labels)

Simple diagram with a central point and radiating lines, no text or symbols present

Technical line drawing of a handheld device with internal components (no text or symbols)

Бутон блокада

Diagram of a toilet with an upward arrow indicating airflow or pressure direction (no text or symbols)

Превкл. тримера

Illustration of a hand holding a device with wires, showing motion and force application (no text or symbols)

Illustration of a hand holding a tool with directional arrows indicating movement or force (no text or symbols present)

Diagram showing a hand holding a rectangular object with a downward arrow indicating a process or transformation (no text or symbols present)

Line drawing of a pair of hairbrushes with motion lines indicating movement (no text or symbols)

Diagram showing a hand holding a spring above a mechanical component with an arrow indicating upward motion (no text or symbols)

Illustration of hands holding a mechanical component (no text or symbols visible)

Фолио

Illustration of two hands holding a small object with a ruler, no text or symbols present

Блок на остриетата

Line drawing of a hand inserting a small object into a device (no text or symbols)

Корпус

Diagram showing a hand holding a small object above a mechanical component (no text or symbols present)

Diagram showing a hand holding a mechanical component being lifted by a spring (no text or symbols present)

Simple line drawing of a cylindrical object with a textured top and bottom edge (no text or symbols)

Блок на фолио

Блок остриета

Блок на фолиото

Diagram showing two hands performing a mechanical manipulation or disassembly process (no text or symbols present)

фиг. 1

Блок остриета

Illustration of a hand holding a mechanical component with directional arrows indicating movement (no text or symbols)

фиг. 2

Diagram showing a hand pressing down on a mechanical component with an upward arrow (no text or symbols)

Symbol of a trash bin with crossed lines indicating no waste, above a solid black rectangle (no text or labels)

Simple diagram with an oval and radial lines, no text or symbols present

Line drawing of a handheld device with internal components (no text or symbols)

Кнопка блокування

Diagram of a toilet with an upward arrow indicating airflow or pressure direction (no text or symbols)

Регулятор тримера

Illustration of a hand holding a grip with two fingers, showing motion lines (no text or symbols)

Illustration of a hand holding a tool with arrows indicating movement or force (no text or symbols present)

Illustration showing a hand holding a device with a magnified view of the top component (no text or symbols)

Line drawing of a pair of hairbrushes with motion lines indicating movement (no text or symbols)

Diagram showing a mechanical assembly with a handle and a base component, no text or symbols present

Illustration of hands assembling a mechanical component (no text or symbols visible)

Ріжуча плівка

Diagram showing a hand holding a small object above a mechanical component, with no visible text or symbols.

Diagram showing a hand holding a small object with a downward arrow indicating process (no text or symbols present)

Simple line drawing of a cylindrical object with a shaded top section (no text or symbols)

Diagram showing two hands performing a mechanical manipulation or tool operation (no text or symbols present)

Блок лез

Symbol of a trash bin with crossed x- and diagonal lines, no text or numbers present

Congratulations on your choice of our appliance, and welcome among the users of Zelmer products.

In order to achieve best possible results we recommend using exclusively original Zelmer accessories. They have been specially designed for this product.

Please read this instruction manual carefully. Pay special attention to important safety instructions. Keep this instruction manual for future reference.

Operation and safety precautions

This information concerns your health and safety. You must read all the operation and safety precautions before using your shaver for the first time.

DANGER! / WARNING!

Risk of injury

- Do not use the appliance if the shaver or AC adaptor is damaged. In such a case take your shaver to a local service centre for repair. Do not attempt to repair the shaver on your own.

- If the cord or plug of the AC adaptor is damaged, or if the plug is loose in the outlet, do not recharge the shaver or use it with an AC power supply.

- The shaver may be repaired by qualified personnel only. In case of any defects, contact a local ZELMER service centre.

- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

- Unplug the AC adaptor from the outlet when the shaver is not in use and before cleaning.

• Do not pull the cord to unplug the shaver from the outlet.
• Do not use the shaver in a bath or under a shower.

- Do not immerse the shaver and AC adaptor in water or any other liquid.

- Do not plug and unplug the mains cord from the outlet with wet hands.

• When using the shaver on an AC power supply, use only the AC adaptor and cord provided with the shaver.
• Use the shaver only with a power supply of 100-240 V. Otherwise it may result in a fire or an electric shock.
• Do not break, bend, stretch, twist or bundle the cord of the AC adaptor. Do not place heavy objects on the cord or put it between them. A broken cord will cause a fire or an electric shock.
• Before using the shaver, make sure that the foil or inner blade is not damaged, as such foil or blade may scratch your face.

- Do not touch the inner parts of the inner blade as its edges are very sharp.

- Do not use the shaver on any other part of your body than your face (such as your head). This may cause an injury to your skin, and will shorten the service life of the outer foil.

WARNING!

Risk of property damage

Do not cover the AC adaptor, as it may cause the temperature inside the adaptor to increase dangerously.
The shaver is intended for shaving and trimming natural hair only. It may be used with human hair only. Do not use the shaver to shave or trim artificial or animal hair.
After recharging the battery, unplug the AC adaptor.
Do not forcibly press against the outer foil, as this may break the foil to cause an injury to your skin.
Do not use the AC adaptor included with the shaver to recharge other electric appliances.
Before washing the shaver under running water, unplug it from the AC adaptor!
Do not recharge the shaver or use it with an AC power supply when the room temperature is below 0^ C or over 40^ C. Never recharge the shaver in direct sunlight or near a heating element such as a heater.
Do not recharge the shaver in a humid place or where it is exposed to splashes of water.
Do not store the shaver in a humid place or where it may be exposed to splashes of water, or in high temperatures.
To clean the body case of the shaver, wipe it with a cloth soaked with a diluted water solution of a neutral detergent. Do not use thinners or benzine as they may damage the plastic parts of the body case.
Do not leave the shaver unattended when charging.

TIP

Product information user instructions

The shaver is for household use only.
The shaver should be preferably charged at temperature between 15^ C and 35^ C.
Failure to use the shaver in accordance with its purpose will void the guarantee.

The shaver may be operated on rechargeable battery.

Before shaving, degrease the skin of your face to prevent hair sticking to the outer foil and causing blades to rub against it. If the foil is dirty, clean it before shaving (e.g. using a handkerchief).

When cleaning the shaver make sure that you do not apply too much oil on the blade and foil. Too much oil will soil the outer foil. Before shaving, wipe the residual shaver oil from the foil (e.g. using a handkerchief).

This symbol means that the shaver is washable, however only when unplugged from the outlet.

Make sure that you understand the above tips.

Technical specification

Technical specifications are given on the nameplate.

The charging adaptor is a Class II electrical device and does not require grounding. The shaver meets the requirements of applicable standards.

This appliance complies with Commission Regulation (EC) no. 1275/2008 on eco-design requirements.

The appliance complies with the following directives:

– Electrical equipment designed for use within specific voltage limits (LVD) – 2006/95/EC.

– Electro-Magnetic Compatibility (EMC) – 2004/108/EC.

The product is marked with CE symbol on the nameplate.

Battery: 2 x Ni-MH 650 mAh cell. Standard charging time: 8 hours. Working temperature range: 0-40°C.

Elements and accessories

Operation

CHARGING

For recharging the shaver use only the AC adaptor provided with the shaver.

Battery activation

When the shaver is first used after being purchased or being left unused for a long time, be sure to recharge the shaver for 16 hours to the full capacity before use, to activate the rechargeable battery. After that, approximately 8 hours of recharging will fully recharge the shaver.

Charge the shaver when the charging indicator lights up in red.

"Battery Memory Effect"

To avoid the “memory effect”, recharge the shaver only after the battery is completely empty.

What is the "memory effect"?

If the Ni-MH battery in your shaver is repeatedly recharged before it runs out of energy, the voltage drops more quickly to decrease the number of times you can use the shaver before the battery runs down.

If you have noticed the "memory effect"

If the full recharge allows less number of shaves before the battery is depleted, consume the recharged energy completely, and then recharge the shaver for approximately 16 hours. Repeating this procedure 2 to 3 times will restore the battery. If the “memory effect” persists, the service life of the battery may have expired. Consult the retailer from whom your shaver was purchased.

Battery life

The life of the battery is approximately 4 years when if it is recharged once a week. However, its life will be shortened if it is recharged more frequently, and it also varies depending on the conditions of use.
If a 1-hour recharging permits only 2 to 3 shaves, the battery life is near its end. In that case, contact the retailer from whom the shaver was purchased. If the shaver is left unused for more than 6 months, the battery's characteristics will deteriorate by self-discharge. It is recommended, therefore, that the shaver be recharged at least once every 6 months even if not in use.

Charging

① Make sure that the shaver is off. To turn it off press the lock button and slide the ON/OFF switch to OFF. Put the cap on.

The battery cannot be charged when the shaver is on.

② Insert the socket plug of the AC adaptor into the socket at the bottom of the shaver.

Before putting the plug of the AC adaptor into the socket of the shaver, make sure that the socket is completely dry to prevent any possible malfunction.

Power supply 100-240 V AC

③ Insert the outlet plug of the AC adaptor into an appropriate outlet (see the rating plate on the AC adaptor).

- The shaver is fully charged in approximately 8 hours.

– During charging, the charge indicator is lit to indicate that charging is in process.

④ When charging is completed, unplug the AC adaptor from the outlet.

When unplugging the AC adaptor, do not pull the cord, as this may damage the AC adaptor. Be sure to hold the plug to pull it out.

On a fully charged battery the shaver will operate for approx. 35 minutes.

Charging indicator

During charging:

The charging indicator will light up in green.

After full charge:

The indicator will come off.

- To prevent possible malfunctions, before charging make sure that the plug and outlet are not damaged.

- While the shaver is charging, the shaver body or AC adaptor may emit a slight noise and/or become slightly warm. This is not a defect.

USE

The shaver is not suitable for operation on AC power supply. The AC power supply may only be used for charging the battery.

If the outer foil is deformed or damaged, replace it with a new one (see the "REPLACEMENT OF OUTER FOIL / INNER BLADE" section). Otherwise, it may scratch your face.

① Remove the cap and turn on the shaver by pressing the lock button and sliding the ON/OFF switch to ON.

② Bring the outer foil in gentle contact with the skin at the right angle, stretch the skin and move the shaver gently upwards against the grain.

● While shaving, take care not to push the outer foil too strongly against the skin. Otherwise, the outer foil will wear at a higher rate and become dull or damaged.
- To shave delicate parts like the chin, pull up the slack of the skin by hand, and stroke upwards. When shaving the throat, lift the face upwards to thrust the throat out to pull the slack upwards.

Diagram of a toilet with an upward arrow indicating airflow or pressure direction (no text or symbols)

Trimming blade button

③ To use the trimming blade, slide the trimming blade button upwards. The trimming blade vibrates correspondingly with the inner blade.

④ To cut sideburns, apply the trimming blade to the skin lightly at a right angle, and move the shaver gently downwards.
⑤ After use, turn off the shaver and clean it with the accessory brush (see the “CLEANING USING BRUSH” section). Be sure to put the cap on after cleaning.

Even if the charging indicator indicates that the shaver is empty and the shaver stops vibrating, never leave it with the power switch turned on.

The shaver can be used to shave with soap or shaving foam only when operated on the rechargeable battery and not on an AC power supply. After every use with soap or shaving foam, be sure to wash the shaver in water (see the “WASHING UNDER RUNNING WATER” section).

Cleaning and maintenance

Before any cleaning and/or maintenance activities, unplug the AC adaptor from the shaver.

WASHING UNDER RUNNING WATER

① Turn off the shaver. Press the outer foil unit release buttons on both sides of the shaver and remove the outer foil unit.

Illustration of a hand holding a device with arrows indicating motion or force (no text or symbols)

Illustration of a hand holding a medical device with arrows indicating force or movement (no text or symbols present)

② Turn on the shaver and wash the blades in cold or lukewarm water. After washing, turn off the shaver and dry the blades (e.g. using a towel).

③ Place the shaver in an airy place to dry it.

Diagram showing a hand holding a device with a magnified view of the device inside a container (no text or symbols)

Line drawing of a hand holding a small electronic device with motion lines indicating movement (no text or symbols)

④ Refit the outer foil unit, taking care not to touch the outer foil.

⑤ Apply shaver oil to the outer foil and trimmer.

Use the blade oil provided with the electric shaver.

⑥ Turn on the shaver for approximately 10 seconds and then wipe the residual oil from the outer foil (e.g. using a handkerchief).

Turn off the shaver before wiping the residual oil from the outer foil.

Only for conservation purposes. Do not drink. Avoid contact with eses and skin. Keep away from children. Keep away from direct sunlight. Keep in dark storage.

CLEANING WITH BRUSH

① Before cleaning make sure that the shaver is off. Press the outer foil unit release buttons on both sides of the shaver and remove the outer foil unit.

② Using the brush, clean the inside of the outer foil unit, the inner blade and the body case of the shaver.

To remove the inner blade, simply pull it upwards.

The blades are sharp and may cut your fingers. Take special care when removing and inserting the inner blade.

Illustration of hands holding a mechanical component (no text or symbols visible)

Outer foil

Illustration of a hand inserting a small object into a body cavity (no text or symbols)

Body case

③ After cleaning, fit correctly the inner blade. Next, fit the outer foil unit, taking care not to touch the foil.

Poor shaving quality and abnormal sound may indicate that the outer foil unit is fitted incorrectly.

Diagram showing a hand holding a spring above a mechanical component with a valve (no text or symbols)

Diagram showing a hand holding a rectangular object being inserted into a mechanical component (no text or symbols present)

Do not remove the outer foil from the outer foil unit.

④ Before cleaning the trimming blade, turn off the shaver.

Check that the trimming blade is not moving when cleaning it.

⑤ Oil the outer foil.

Trimming blade

REPLACEMENT OF OUTER FOIL / INNER BLADE

The outer foil and the inner blade are consumables. In order to enjoy a comfortable clean shave, it is recommended that the outer foil and the inner blade be replaced with new ones in a set at least once a year. Use of foil and blade beyond their serviceable life may not only result in poor shaving performance but also damage such foil and blade to scratch your skin.

The above replacement period of the outer foil and the inner blade serves as a guideline only, and their serviceable lives vary greatly depending on the condition of use of each user. If you find them unable to give a good shave, damaged or deformed, replace them with new ones immediately.

Before replacing the outer foil or inner blade, be sure to turn off the shaver.

We recommend using only original ZELMER spare parts. Spare parts set no. SH1110111.

Simple line drawing of a cylindrical object with a rectangular top and side gap (no text or symbols)

Outer foil unit

Inner blade

Outer foil unit

① Press the outer foil unit release buttons on both sides of the shaver and remove the outer foil unit.
② Fit correctly a new outer foil unit (a click sound will indicate correct fitting).

Inner blade

① Remove the outer foil unit (fig. 1).
② Hold the sides of the inner blade with your fingers and pull it upwards (fig. 2).
③ Fit the new inner blade on the vibrator by pushing it downwards.

Be sure to set both inner blades. Otherwise, abnormal noise, injury or malfunction may result.

④ Fit the outer foil unit securely.

Illustration of a hand holding a device with arrows indicating movement or force (no text or symbols)

fig. 1 fig. 2

Ecology – protect the environment

Each user can contribute to protecting the environment. It is not difficult or too expensive. For this purpose, dispose of the carton and plastic packaging materials into appropriate waste paper and plastic (PE) recycling containers.

Batteries contain substances harmful to the environment. Do not dispose the appliance in household waste. Bring the battery to an official recycling centre.

At the end of its useful life, bring the appliance to an official waste collection site, as some of its components may be hazardous to the environment.

Symbol of a trash bin with crossed lines indicating no waste, above a solid black rectangle (no text or labels)

Do not dispose of together with domestic waste!

The manufacturer/importer does not accept any liability for any damages resulting from unintended use or improper handling.

The manufacturer/importer reserves his rights to modify the product any time in order to adjust it to law regulations, norms, directives, or due to construction, trade, aesthetic or other reasons, without notifying in advance.