Question 1

How to disable standby mode and resolve a no signal issue on this television?

Accepted Answer

Your TECHWOOD TKS32HD470 television is experiencing two distinct issues. Here’s how to resolve them:

Disable automatic standby mode

If your television regularly turns off, automatic standby is activated. To disable it:

Press Menu
Go to Settings > System > More
Select Automatic power off of the television
Set to Disabled

Without this setting, the television will automatically turn off after 1 to 8 hours of inactivity depending on your configuration.

Resolve the

Question 2

How to obtain an IP address on the TECHWOOD TKS32HD470 television?

Accepted Answer

The TECHWOOD TKS32HD470 television can obtain an IP address in two ways:

Wired connection (Ethernet): Plug a network cable directly into the LAN port located at the back of the television. The TV will automatically receive an IP address (DHCP mode) via your router.
Wireless connection: The television does not have built-in WiFi. You need to install a compatible USB WiFi adapter (not included) into one of the USB ports, then access the menu to configure the wireless connection.

Manual IP address configuration

To configure or change the IP address, go to Settings > Network in the main menu. The advanced options allow you to:

Switch from DHCP mode (automatic) to static IP mode
Manually enter the IP address, subnet mask, and gateway
Configure custom DNS servers

The menu also offers an Internet speed test to check the bandwidth of your network connection.

Question 3

How to set the timer on the TECHWOOD L32842FHD10?

Accepted Answer

On your TECHWOOD L32842FHD10, you can access the timers and scheduled sleep mode through two options:

Accessing the Timer Menu

Press the TIME button on the remote control to display the timer window.

Adding a Timer

Press the YELLOW button to open the "Add Timer" window
Set the Channel by navigating with the ◀ or ▶ buttons
Enter the Date using the left/right buttons or the numeric buttons
Set the Start Time and End Time using the same methods
The Duration will automatically display after entering the times
Save with the GREEN button or cancel with the RED button

Scheduled Sleep Mode

To program the automatic shutdown of your television, access the Function menu and then Sleep Timer.

Subsequent modifications and deletions use the GREEN button (to modify) and the RED button (to delete) respectively.

Question 4

How to access the channel settings menu without a remote control on the TECHWOOD TKF322016B?

Accepted Answer

If you do not have access to your remote control, you can access the channel settings menu using the physical buttons located on the front panel of the television.

Steps to access the main menu without a remote control:

Press simultaneously the "-" and "+" buttons (program selection keys) to display the main menu
Use the up/down navigation buttons (program +/-) to browse the menu options
Look for the option "Channel List" or "Liste des chaines"
Confirm your choice with the OK/MENU button

Available buttons on your television:

Power button (On/Off)
Program +/- buttons (to navigate and confirm)
Volume +/- buttons (for some menus)
TV/AV button (to change the input source)

Once in the Channel List menu, you can edit, add, or delete channels using these same physical buttons.

Question 5

How do you turn on the subtitles?

Accepted Answer

On the Techwood TD24FHDLED19, you can activate subtitles in two ways:

Quick method: While watching a program on digital TV (DVB), simply press the Language button (button 3) on the remote control. This button allows you to quickly change the audio language and display the available subtitles for the current program, if the channel offers them.

Menu method: To configure the subtitle mode, proceed as follows:

Press the Menu button on the remote control
Navigate to Sound or Settings
Select More
Go to Subtitle Mode
Choose between DVB subtitle (default mode) or Teletext subtitle
Confirm with OK

Using teletext: You can also press the Text button to access teletext, which also offers subtitles on certain channels. Press again to overlay teletext on the live image (mixed mode).

Important: The availability of subtitles depends entirely on the broadcaster. Not all programs and channels include subtitles. The DVB mode (digital subtitles) is the most common and the default mode on this television. Teletext subtitles remain accessible on certain analog channels or via the Text button.

Question 6

How to reset the remote control of the TECHWOOD TKF322016B television when it no longer works?

Accepted Answer

If the remote control of your TECHWOOD TKF322016B television is not working, follow this reset procedure which resolves most malfunctions:

Step 1 - Remove the batteries: Locate the battery compartment at the back of the remote control. Gently push back at the indicated part to remove the cover. Take out the two AAA/R3 batteries and set them aside for at least one minute. This pause allows for a complete reset of the remote control's internal circuits.

Step 2 - Discharge the circuits: After this one-minute wait, press all the buttons on the remote control (for about 10 to 15 seconds) without the batteries. This step is essential as it completely eliminates any residual electrical charge from the circuits, which often corrects minor malfunctions. Feel free to press each button at least once.

Step 3 - Reinstall the batteries: Place the two AAA/R3 (or equivalent) batteries back into the compartment, strictly respecting the indicated polarity (+/-). Ensure that the batteries are new or fully charged. Then, replace the compartment cover by pressing until it clicks into place.

Step 4 - Test the remote control: Point the remote control at the television (recommended distance: less than 7 meters) and test a few buttons to check that it responds correctly. In particular, check that the power, volume, and channel selection buttons work.

If the remote control still does not work after this reset, check that nothing is blocking the infrared signal between the remote control and the television. You can also clean the area of the infrared diodes (at the front of the remote control and on the television) with a damp cotton swab. If the problem persists, it is possible that the remote control is defective or that the batteries are drained despite appearances. In this case, replace the batteries with new models from a recognized brand, or contact an authorized TECHWOOD after-sales service for a replacement remote control.

Question 7

Is the TECHWOOD VL47TV2011 television compatible with Wi-Fi connection?

Accepted Answer

No, the TECHWOOD VL47TV2011 television does not have built-in Wi-Fi connectivity. This model does not have a native Wi-Fi module, which means you cannot connect it directly to a wireless network to access the Internet or online services.

However, the television offers several connections to work around this limitation:

HDMI Connection: This is the simplest and most effective solution. Connect a Wi-Fi compatible device (Chromecast, Apple TV, Fire TV Stick, Google TV, Wi-Fi decoder, gaming console, etc.) directly to one of the HDMI ports on the television. This device will allow you to access all streaming services (Netflix, YouTube, etc.).
USB Connection: The television has a USB input that allows you to read multimedia content stored on USB drives or external hard drives in a compatible format.
VGA Connection for a Computer: You can connect a PC or laptop via the VGA connector (PC input) to display its content on the screen. An additional audio connection will be necessary for sound.
AV/Scart Connection: For older external devices (VCR, DVD player, non-Wi-Fi cable/satellite decoder), use the Scart connectors or the side AV ports.

The recommended solution remains the HDMI connection with a media box or streaming stick, which offers the best compatibility with current online services.

User manual TECHWOOD : user manuals and guides in PDF

Models TECHWOOD most viewed

Browse manuals TECHWOOD by appliance type

Recent questions about devices TECHWOOD