Question 1

How to reset the remote control of the TECHWOOD TKF322016B television when it no longer works?

Accepted Answer

If the remote control of your TECHWOOD TKF322016B television is not working, follow this reset procedure which resolves most malfunctions:

Step 1 - Remove the batteries: Locate the battery compartment at the back of the remote control. Gently push back at the indicated part to remove the cover. Take out the two AAA/R3 batteries and set them aside for at least one minute. This pause allows for a complete reset of the remote control's internal circuits.

Step 2 - Discharge the circuits: After this one-minute wait, press all the buttons on the remote control (for about 10 to 15 seconds) without the batteries. This step is essential as it completely eliminates any residual electrical charge from the circuits, which often corrects minor malfunctions. Feel free to press each button at least once.

Step 3 - Reinstall the batteries: Place the two AAA/R3 (or equivalent) batteries back into the compartment, strictly respecting the indicated polarity (+/-). Ensure that the batteries are new or fully charged. Then, replace the compartment cover by pressing until it clicks into place.

Step 4 - Test the remote control: Point the remote control at the television (recommended distance: less than 7 meters) and test a few buttons to check that it responds correctly. In particular, check that the power, volume, and channel selection buttons work.

If the remote control still does not work after this reset, check that nothing is blocking the infrared signal between the remote control and the television. You can also clean the area of the infrared diodes (at the front of the remote control and on the television) with a damp cotton swab. If the problem persists, it is possible that the remote control is defective or that the batteries are drained despite appearances. In this case, replace the batteries with new models from a recognized brand, or contact an authorized TECHWOOD after-sales service for a replacement remote control.

Question 2

Is the TECHWOOD VL47TV2011 television compatible with Wi-Fi connection?

Accepted Answer

No, the TECHWOOD VL47TV2011 television does not have built-in Wi-Fi connectivity. This model does not have a native Wi-Fi module, which means you cannot connect it directly to a wireless network to access the Internet or online services.

However, the television offers several connections to work around this limitation:

HDMI Connection: This is the simplest and most effective solution. Connect a Wi-Fi compatible device (Chromecast, Apple TV, Fire TV Stick, Google TV, Wi-Fi decoder, gaming console, etc.) directly to one of the HDMI ports on the television. This device will allow you to access all streaming services (Netflix, YouTube, etc.).
USB Connection: The television has a USB input that allows you to read multimedia content stored on USB drives or external hard drives in a compatible format.
VGA Connection for a Computer: You can connect a PC or laptop via the VGA connector (PC input) to display its content on the screen. An additional audio connection will be necessary for sound.
AV/Scart Connection: For older external devices (VCR, DVD player, non-Wi-Fi cable/satellite decoder), use the Scart connectors or the side AV ports.

The recommended solution remains the HDMI connection with a media box or streaming stick, which offers the best compatibility with current online services.

User manual TECHWOOD TV : user manuals and guides in PDF

Models TECHWOOD TV most viewed

Other categories TECHWOOD

Recent questions about TV TECHWOOD