Q: What is the default MIDI channel and how does pitch bend work on the Keystation Mini 32 MK3?

Default MIDI channel: The Keystation Mini 32 MK3 is set by default to MIDI channel 1 . You can change this channel using the channel selection buttons that allow you to choose between channels 1 to 16. Pitch bend: The keyboard features a pitch bend wheel among its main controls. To use it, simply move the wheel while playing a note to smoothly and gradually change the pitch. This function can be reassigned to other MIDI controllers via the Edit mode if desired. Restore default settings: If you have changed these settings, you can restore all factory settings (MIDI channel 1, octave position 0, standard velocity curve) by holding down both octave buttons simultaneously when connecting via USB.

Q: How to reset the Keystation Mini 32 MK3 to its factory settings?

To reset the Keystation Mini 32 MK3 to its default settings, press and hold the two Octave + and - buttons simultaneously while connecting the USB cable. This reset restores: The MIDI channel to 1 The octave to position 0 (central octave) The standard velocity curve After the reset, you can release the buttons once the keyboard is reconnected.

Q: How to configure or reassign the pitch bend function?

The Keystation Mini 32 MK3 features a pitch bend wheel among its main controls. By default, it manages modulation and pitch bend during playback. To use the pitch bend: Simply move the pitch bend wheel while playing a note to smoothly change its pitch. To reassign the pitch bend function to another MIDI controller: Press the Edit button Press the ASSIGN PB (D#) key Enter the desired MIDI controller number using the numeric keys (for example, 7 for volume, or any other CC) Confirm your choice by pressing Enter This reassignment allows you to tailor the keyboard to your specific musical needs by assigning a different function to the pitch bend.

Question 1

How to activate Bluetooth on M-AUDIO BX3 BT speakers?

Accepted Answer

To activate Bluetooth on your M-AUDIO BX3 BT speakers, follow these simple steps:

Turn on the speakers by turning the Vol/Power knob located on the front panel.
Press the Bluetooth button located on the back panel to enter pairing mode. The Power/Bluetooth LED will start blinking blue.
On your phone or device, go to Bluetooth settings and look for "BX3 BT" in the list of available devices.
Select "BX3 BT" to establish the connection. If a code is requested, enter 0000.
Once successfully paired, the LED will stop blinking and remain solid blue, confirming the active connection.

The speakers are now ready to stream audio from your Bluetooth device.

Question 2

What is the default MIDI channel and how does pitch bend work on the Keystation Mini 32 MK3?

Accepted Answer

Default MIDI channel: The Keystation Mini 32 MK3 is set by default to MIDI channel 1. You can change this channel using the channel selection buttons that allow you to choose between channels 1 to 16.

Pitch bend: The keyboard features a pitch bend wheel among its main controls. To use it, simply move the wheel while playing a note to smoothly and gradually change the pitch. This function can be reassigned to other MIDI controllers via the Edit mode if desired.

Restore default settings: If you have changed these settings, you can restore all factory settings (MIDI channel 1, octave position 0, standard velocity curve) by holding down both octave buttons simultaneously when connecting via USB.

Question 3

How to reset the Keystation Mini 32 MK3 to its factory settings?

Accepted Answer

To reset the Keystation Mini 32 MK3 to its default settings, press and hold the two Octave + and - buttons simultaneously while connecting the USB cable.

This reset restores:

The MIDI channel to 1
The octave to position 0 (central octave)
The standard velocity curve

After the reset, you can release the buttons once the keyboard is reconnected.

Question 4

How to configure or reassign the pitch bend function?

Accepted Answer

The Keystation Mini 32 MK3 features a pitch bend wheel among its main controls. By default, it manages modulation and pitch bend during playback.

To use the pitch bend:

Simply move the pitch bend wheel while playing a note to smoothly change its pitch.

To reassign the pitch bend function to another MIDI controller:

Press the Edit button
Press the ASSIGN PB (D#) key
Enter the desired MIDI controller number using the numeric keys (for example, 7 for volume, or any other CC)
Confirm your choice by pressing Enter

This reassignment allows you to tailor the keyboard to your specific musical needs by assigning a different function to the pitch bend.

Question 5

Is the M-AUDIO Uber Mic compatible with an iPad Air?

Accepted Answer

According to the manual, the M-AUDIO Uber Mic is designed to work with Windows and macOS only. Its mini-USB port is intended for a direct connection to a computer.

To use this microphone on an iPad Air, you would encounter two obstacles:

Incompatible connector - The iPad Air uses a Lightning port (older models) or USB-C (newer models), while the mic has a mini-USB.
Drivers and limited support - The microphone requires specific drivers that are not available on iPadOS.

Recommendation: If you need to record on iPad, prefer a microphone designed for iOS/iPadOS with a direct USB-C or Lightning connection, or invest in a Bluetooth microphone compatible with iPad.

Question 6

How to resolve the issue of no sound on a specific key (Ch 7) of the M-AUDIO Keystation 49 MK3 MIDI keyboard?

Accepted Answer

The M-Audio Keystation 49 MK3 MIDI keyboard does not produce sound by itself. If you find that a specific key or MIDI channel (for example, channel 7) is not producing any sound, it means that the keyboard is not sending MIDI data correctly or that your music software is not configured to receive on that channel. Here’s how to resolve this issue.

Checking the USB connection

Make sure the provided USB cable is properly connected to the Keystation 49 MK3 and to a USB port on your computer (or powered USB hub).
Turn off the keyboard for 10 seconds, then turn it back on and restart your computer.
If the problem persists after restarting, reinstall the keyboard drivers.

Checking the MIDI channel

Press the Advanced button to put the keyboard into programming mode.
Press the black key corresponding to the channel number you want to use (for example, the key for channel 7).
The keyboard should confirm the channel change with a light indicator.
Then check in your music software (Pro Tools, Ableton Live Lite, etc.) that the MIDI receive channel is correctly configured to receive on the same channel as that emitted by the Keystation.

Configuring the music software

Open the MIDI preferences of your software and check that the Keystation 49 MK3 (or "USB Audio Device") is enabled as a MIDI input source.
Make sure a MIDI track is set up to receive data from the Keystation and that a virtual instrument is assigned to it.
In Ableton Live Lite, check that the On button is activated in the Track and Remote columns next to "Input: Keystation 49 MK3" (MIDI/Sync tab).
In Pro Tools First, confirm that the MIDI Input option for the Keystation 49 MK3 is checked in Setup > MIDI Input Devices.

Testing with Reset All Controllers

If an unwanted effect is affecting the specific channel, press the Advanced button to put the keyboard into programming mode.
Press the black key RESET to reset all MIDI controllers.
Test the problematic channel again.

Factory reset

If the previous steps do not resolve the issue, perform a factory reset: turn off the Keystation, hold down the “+” and “-” buttons simultaneously, turn the keyboard back on, then release the buttons.
The keyboard will return to its factory settings and all MIDI channels will be functional again.

If despite these checks channel 7 (or the specific key) still does not produce sound, it may be that only this MIDI channel is defective. Test the other channels to isolate the problem. If all other channels work correctly, contact M-Audio support at m-audio.com/support for assistance or repair.

User manual M-AUDIO : user manuals and guides in PDF

Models M-AUDIO most viewed

Browse manuals M-AUDIO by appliance type

Recent questions about devices M-AUDIO