What does error code E2 mean on the DKN AM5i exercise bike and how can it be resolved?

Q: What does error code E2 mean on the DKN AM5i exercise bike and how can it be resolved?

The error code E2 on the DKN AM5i exercise bike generally indicates a problem related to the resistance or communication between the speed sensor and the onboard computer. Here’s how you can attempt to resolve this issue: Steps to resolve error code E2 Check the connections: Ensure that all cables and connectors between the resistance, speed sensor, and onboard computer are properly connected and in good condition. A disconnected or damaged cable can cause this error. Restart the bike: Completely turn off the device, wait a few minutes, and then turn it back on. This can sometimes reset the computer and clear the error. Inspect the speed sensor: Check that the sensor is clean, properly aligned, and secured. A misaligned or dirty sensor can prevent proper communication with the computer. Test the resistance: Try adjusting the resistance manually to see if it operates normally. If the resistance does not respond, this may be the cause of the E2 code. If after these checks the error persists, it is advisable to contact customer service or a qualified technician for further assistance.

Question

Accepted Answer

The error code E2 on the DKN AM5i exercise bike generally indicates a problem related to the resistance or communication between the speed sensor and the onboard computer. Here’s how you can attempt to resolve this issue:

Steps to resolve error code E2

Check the connections: Ensure that all cables and connectors between the resistance, speed sensor, and onboard computer are properly connected and in good condition. A disconnected or damaged cable can cause this error.
Restart the bike: Completely turn off the device, wait a few minutes, and then turn it back on. This can sometimes reset the computer and clear the error.
Inspect the speed sensor: Check that the sensor is clean, properly aligned, and secured. A misaligned or dirty sensor can prevent proper communication with the computer.
Test the resistance: Try adjusting the resistance manually to see if it operates normally. If the resistance does not respond, this may be the cause of the E2 code.

If after these checks the error persists, it is advisable to contact customer service or a qualified technician for further assistance.

User manual DKN : user manuals and guides in PDF

Models DKN most viewed

Browse manuals DKN by appliance type

Recent questions about devices DKN