How to calibrate the grind of the EUREKA Mignon Libra 65 grinder?

Q: How to calibrate the grind of the EUREKA Mignon Libra 65 grinder?

The EUREKA Mignon Libra 65 features a stepless adjustment knob located under the bean hopper, allowing for continuous grind size adjustment. Calibration for espresso Start with a fine setting. While the grinder is running, gradually turn the knob and observe the extraction time: If the espresso flows too slowly : turn the knob slightly counterclockwise (coarser grind) If the espresso flows too quickly : turn the knob clockwise (finer grind) Calibration for other preparations You can transition from a very fine grind (espresso) to a coarse grind (filters, French press) by gradually turning the knob until you achieve the desired granularity. Key features: The burrs are made of hardened steel and measure 65 mm. The hopper capacity is 300 g, and the integrated electronic doser offers precision to the tenth of a gram.

Question

Accepted Answer

The EUREKA Mignon Libra 65 features a stepless adjustment knob located under the bean hopper, allowing for continuous grind size adjustment.

Calibration for espresso

Start with a fine setting. While the grinder is running, gradually turn the knob and observe the extraction time:

If the espresso flows too slowly: turn the knob slightly counterclockwise (coarser grind)
If the espresso flows too quickly: turn the knob clockwise (finer grind)

Calibration for other preparations

You can transition from a very fine grind (espresso) to a coarse grind (filters, French press) by gradually turning the knob until you achieve the desired granularity.

Key features: The burrs are made of hardened steel and measure 65 mm. The hopper capacity is 300 g, and the integrated electronic doser offers precision to the tenth of a gram.

User manual EUREKA Coffee grinder : user manuals and guides in PDF

Models EUREKA Coffee grinder most viewed

Other categories EUREKA

Recent questions about Coffee grinder EUREKA