SG85 Batch Brew - Coffee grinder EUREKA - Free user manual and instructions
Find the device manual for free SG85 Batch Brew EUREKA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Coffee grinder |
| Brand | EUREKA |
| Model | SG85 Batch Brew |
| Burr type | Flat hardened steel burrs, 85 mm |
| Grind adjustment | Micro-adjustment stepless |
| Hopper capacity | 1.5 kg |
| Ground coffee container capacity | 350 g |
| Dimensions (W × D × H) | 20 × 30 × 50 cm |
| Net weight | 10.5 kg |
| Power supply | 220-240 V ~ 50/60 Hz |
| Rated power | 600 W |
| Rotation speed | 1400 rpm |
| Main features | Dosing grinding for filter coffee, automatic stop at end of cycle, dose adjustment |
| Maintenance and cleaning | Easy disassembly of burrs, clean with brush, do not immerse |
| Safety | Thermal circuit breaker, automatic stop in case of overload |
| Spare parts and repairability | Burrs, hopper, container, switch available |
| Warranty | 2 years |
Frequently Asked Questions - SG85 Batch Brew EUREKA
How to clean the burrs of the Eureka SG85 Batch Brew grinder?
Disconnect the appliance, remove the hopper and container, then disassemble the chassis to access the burrs. Use a hard brush and a vacuum cleaner to remove coffee residues. Never use water or detergent on the burrs.
How to adjust the grind on the SG85 Batch Brew?
Turn the stepless adjustment knob located on top of the grinder. A full turn changes the grind size continuously. For filter coffee, start with a medium setting and adjust based on extraction time (5-8 minutes recommended for a batch brew).
What is the hopper capacity?
The hopper can hold up to 1.5 kg of coffee beans, allowing you to grind large quantities for professional or heavy home use.
How to change the flat burrs?
Disassemble the grinder by removing the fixing screws, then remove the worn burrs. Replace them with new ones, respecting the direction of rotation. Use a torque wrench to tighten to 15 Nm. Refer to the manual for the detailed diagram.
Why does the grinder stop during grinding?
This may be due to a thermal overload (internal circuit breaker) or a jam of beans. Wait 10 minutes for the motor to cool down, then reduce the dose or switch to a coarser grind.
Can I use this grinder for espresso?
The SG85 Batch Brew is designed for filter coffee (batch brew). Although it offers stepless adjustment, the 85 mm flat burrs are optimized for medium to coarse grinding. For espresso, prefer a dedicated Eureka model such as the Mignon Specialita.
What accessories are provided with the grinder?
The grinder comes with a hopper, a ground coffee container, a cleaning brush, and a gauge for initial adjustment. Replacement burrs are sold separately.
How to dose the grind for a batch brew?
Use the dosing lever: each press corresponds to a preset dose (usually 60 g). You can adjust the dose by turning the adjustment screw under the container. For 1 liter of water, plan 60-70 g of ground coffee.
What are the power and voltage of the motor?
The motor delivers 600 W at 220-240 V ~ 50/60 Hz. It is equipped with a thermal circuit breaker to prevent overheating under heavy use.
Where to find spare parts for the SG85 Batch Brew?
Contact Eureka after-sales service or authorized dealers. Available parts include burrs, hopper, container, adjustment knob, and switch. Use genuine parts to ensure compliance.
User questions about SG85 Batch Brew EUREKA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Coffee grinder in PDF format for free! Find your manual SG85 Batch Brew - EUREKA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SG85 Batch Brew by EUREKA.
USER MANUAL SG85 Batch Brew EUREKA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EUREKA
Model : SG85 Batch Brew
Category : Coffee grinder