Question 1

What compartments need to be filled on the ROBOROCK Saros 10R robot vacuum?

Accepted Answer

The ROBOROCK Saros 10R robot vacuum has several compartments to manage for optimal operation. These elements must be filled or installed before each use to ensure complete cleaning and washing performance.

The clean water tank: This tank supplies the mop washing system. Before each use, lift the tank, open its lid, and fill it with tap water. Once filled, close the lid, lock the latch, and place the tank back in the station. Do not exceed the maximum level indicated.

The dirty water tank: This compartment collects the wastewater after mopping. It does not need to be filled initially but should be emptied regularly. To clean it, open the lid, dispose of the dirty water, fill it with clean water to rinse, close it, and shake it, then dispose of the water. Regularly clean this element to avoid bad odors.

The cleaning solution cartridge: This compartment must be filled with the cleaning solution recommended by Roborock. First, remove the lid from the dust container, then pull out the cartridge by its handle. Open the cartridge lid, add the cleaning solution, close the lid, and place the cartridge back until you hear a click confirming it is locked. Only use the detergent recommended by Roborock.

The dustbin: The robot has a dustbin with a capacity of 600 ml that collects dust and debris. Thanks to the automatic emptying station, the bin is emptied automatically after each cleaning. Ensure that a disposable dust bag is installed in the designated slot before each automatic emptying.

The disposable dust bag: This bag, located in the station, collects the dust emptied from the robot. Always install a dust bag before replacing the lid of the dust container to avoid any automatic emptying without a bag. Replace the bag when it is full.

Before starting your robot vacuum, ensure that all these compartments are properly filled, installed, and closed to guarantee optimal cleaning and washing performance.

Question 2

Which Android app to use to control the ROBOROCK E5 vacuum robot?

Accepted Answer

To control your ROBOROCK E5 vacuum robot from an Android smartphone, you need to use the Roborock app, available for free on the Google Play Store.

How to proceed:

Open the Google Play Store on your Android phone.
Search for the Roborock app.
Download and install the app.
Open the app and create an account or log in if you already have one.
Follow the on-screen instructions to connect your ROBOROCK E5 to your smartphone via Wi-Fi.

Once connected, the app allows you to:

Schedule and start cleaning sessions.
Monitor the status and progress of cleaning in real-time.
Set up no-go zones and cleaning plans.
Receive notifications and updates from the robot.

This app greatly facilitates the management and remote control of your ROBOROCK E5 vacuum robot.

User manual ROBOROCK Robot vacuum : user manuals and guides in PDF

Models ROBOROCK Robot vacuum most viewed

Other categories ROBOROCK

Recent questions about Robot vacuum ROBOROCK