Qrevo Slim - Robot vacuum ROBOROCK - Free user manual and instructions
Find the device manual for free Qrevo Slim ROBOROCK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Robot Vacuum and Mop |
| Brand | Roborock |
| Model | Qrevo Slim |
| Dimensions (Diameter x Height) | 350 mm x 96 mm |
| Weight | 4.5 kg |
| Power Source | Rechargeable lithium-ion battery |
| Battery Capacity | 5200 mAh |
| Suction Power | 5500 Pa |
| Navigation System | LiDAR laser navigation |
| Mopping Function | Electronic water tank with adjustable flow |
| Dustbin Capacity | 350 ml |
| Water Tank Capacity | 200 ml |
| Filtration System | High-efficiency filter (HEPA-grade) |
| App Control | Roborock app (iOS/Android) |
| Voice Control | Compatible with Alexa, Google Assistant, Siri shortcuts |
| Scheduled Cleaning | Yes, via app |
| Return to Dock & Resume | Yes, automatic recharge and resume |
| Cliff Sensors | Yes, drop detection |
| Main Brush | Rubber brush |
| Side Brushes | 2 (left and right) |
| Replacement Parts | Filter, main brush, side brushes, mopping pad, battery |
Frequently Asked Questions - Qrevo Slim ROBOROCK
How do I connect the Qrevo Slim to Wi-Fi?
Download the Roborock app from the App Store or Google Play. Press and hold the power button for 5 seconds until the Wi-Fi indicator blinks. Follow the in-app instructions to connect to your network.
What should I do if the vacuum does not start?
Check if the battery is charged. Ensure the main power switch (if any) is on. Press the power button once; if still off, hold for 5 seconds to force reset. Also verify that the dustbin and mopping pad are properly installed.
How often should I clean the filter?
Clean the filter every 1-2 weeks by tapping it gently. Replace the filter every 3-6 months depending on usage. Do not wash the filter with water unless specified.
Can the Qrevo Slim vacuum carpets?
Yes, it automatically increases suction power when it detects carpet. It can handle low- and medium-pile carpets. For high-pile carpets, use the app to set a no-mop zone.
How does the mopping function work?
Attach the mopping pad and fill the water tank. In the app, select mopping mode and adjust water flow. The vacuum will map rooms and avoid carpets if set. Empty the tank after use to prevent odors.
Why is the vacuum not mapping correctly?
Ensure good lighting and clear paths for the LiDAR sensor. Check that no objects block the sensor. Reset the map in the app and run a new mapping cycle. Obstacles like mirrors or black floors may cause issues.
What should I do if the robot gets stuck?
Remove any tangles from the main brush and side brushes. Check if the wheels are blocked. Use the app to find its location and manually clear the area. Enable 'Less Collision' mode in settings for tight spaces.
How do I replace the main brush?
Lift the robot and turn it over. Press the release tab on the main brush cover to open. Remove the old brush and insert a new one. Close the cover until it clicks. The brush should be replaced every 6-12 months.
Can I schedule cleaning times?
Yes, open the Roborock app and go to 'Schedules'. Set specific times and days for cleaning. You can also choose which rooms to clean and the suction/mopping mode for each schedule.
What does the 'Do Not Disturb' mode do?
When enabled, the vacuum will not start cleaning or make voice prompts during the set hours (default 22:00-08:00). It will still complete any ongoing cleaning but will not resume after returning to dock. You can adjust the hours in the app.
User questions about Qrevo Slim ROBOROCK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Robot vacuum in PDF format for free! Find your manual Qrevo Slim - ROBOROCK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Qrevo Slim by ROBOROCK.