What does the error message "Err" mean on the Joycare JC435 scale and how can I resolve this issue?

Question

Accepted Answer

The "Err" message on the Joycare JC435 scale indicates a measurement problem. This can occur for several reasons, including exceeding the maximum capacity (180 kg) or an uneven load on the platform. Here’s how to diagnose and resolve the issue:

Check your position and weight distribution: Stand in the center of the platform and remain completely still during the measurement. A poor position, uneven weight distribution, or body instability can trigger the error. Also, ensure that your feet are clean and dry, as moisture can disrupt the scale's sensors.

Check the positioning surface: The scale should be placed on a hard, flat surface, such as tile, wood, or concrete. Rugs, carpets, or soft surfaces can cause measurement errors by disrupting the very sensitive internal sensors.

Check the battery: The Joycare JC435 scale operates with a 3V CR2032 lithium battery. Replace it with a new battery if the low battery indicator appears. A weak battery does not provide enough power for the sensors and causes errors.

Reset the scale: Open the battery compartment under the scale, remove the battery for 30 seconds, then reinsert it. This procedure resets the electronic circuits and often corrects temporary malfunctions.

Check your weight: Confirm that your weight does not exceed the maximum capacity of the scale, which is 180 kg. If you are approaching or exceeding this limit, the scale will display "Err".

If the "Err" message persists after all these checks, an internal technical defect may be the cause. In this case, contact Joycare customer service for professional assistance or product exchange, especially if you have adhered to all usage conditions.

User manual Joycare Scale : user manuals and guides in PDF

Models Joycare Scale most viewed

Other categories Joycare

Recent questions about Scale Joycare