Can a wall thermostat be installed on a Cecotec ReadyWarm 9000 Touch towel warmer?

Question

Accepted Answer

No, it is not possible to install a wall thermostat on the ReadyWarm 9000 Touch. This device is designed with an integrated and autonomous control system. The oil-filled radiator already has a built-in mechanical thermostat that automatically manages the ambient temperature.

How the integrated thermostat works: You set the desired temperature directly via the radiator's touch LCD screen (buttons + and -). Once set, the mechanical thermostat operates automatically: it turns off the heating when the ambient temperature reaches the configured level, and it automatically turns back on if the temperature drops below that level. This system does not require any external thermostat.

Why a wall thermostat is incompatible: The ReadyWarm 9000 Touch is equipped with a simple standard power cord. There is no connection socket for an external thermostat. The radiator operates continuously when plugged in, and its internal thermostat manages the on and off based on the detected temperature.

Alternatives: If you want remote control or advanced programming, you can use a smart programmable plug (Wi-Fi plug with timer) to turn the device on/off at specific times. However, this does not replace the thermostat: only the power control would be managed by the plug, while temperature management would continue via the internal mechanical thermostat.

Important advice: Adding external devices not provided by the manufacturer could affect the proper functioning of the radiator and void the 2-year warranty. For specific needs regarding advanced temperature control, consult the official Cecotec customer service.

User manual CECOTEC Heating : user manuals and guides in PDF

Models CECOTEC Heating most viewed

Other categories CECOTEC

Recent questions about Heating CECOTEC