How to remove and change the rollers of the Bamba SkinCare Silky?

Q: How to remove and change the rollers of the Bamba SkinCare Silky?

The Bamba SkinCare Silky is equipped with a roller release button that allows you to easily remove the rollers (thin and thick). Here are the steps: Make sure the device is turned off and the power button is in the off position. Locate the roller release button on the device (usually at the top or on the side). Press and hold this button. Gently pull the roller towards you to detach it completely. The roller will come off its housing without resistance. You have two types of rollers: the thin roller for less tough areas and the thick roller for treating tougher areas. You can interchange them according to your needs. After use, clean your roller with the cleaning brush provided in the kit, then reattach it by gently pushing until you hear a slight locking click.

Question

Accepted Answer

The Bamba SkinCare Silky is equipped with a roller release button that allows you to easily remove the rollers (thin and thick).

Here are the steps:

Make sure the device is turned off and the power button is in the off position.
Locate the roller release button on the device (usually at the top or on the side).
Press and hold this button.
Gently pull the roller towards you to detach it completely.
The roller will come off its housing without resistance.

You have two types of rollers: the thin roller for less tough areas and the thick roller for treating tougher areas. You can interchange them according to your needs.

After use, clean your roller with the cleaning brush provided in the kit, then reattach it by gently pushing until you hear a slight locking click.

User manual CECOTEC Manicure and pedicure set : user manuals and guides in PDF

Models CECOTEC Manicure and pedicure set most viewed

Other categories CECOTEC

Recent questions about Manicure and pedicure set CECOTEC