Q: How to activate the hourly beep on the Puma Form watch?

The Puma Form watch does not have an hourly beep function. However, this digital sports watch offers a dual daily alarm with an activatable chime, as well as sound signals on the timer. The chime (sound signal) activates at the same time as the alarm. To use the available alarms: Press S3 from any mode to access Alarm mode (AL) Press S2 to select between Alarm 1 and Alarm 2 Press S1 to turn the selected alarm on or off (the chime automatically activates with the alarm) Press and hold S4 to set the alarm time (the hour blinks, then the minutes) You can set two independent alarms that will sound at the programmed time each day. A bell icon appears on the screen when an alarm is active. When triggered, the alarm emits a chime for about 20 seconds. If you are looking for other sound signals, the watch also provides beeps on the timer: 5 beeps at 5 minutes before the countdown ends, 2 beeps at 2 minutes, 1 beep at 1 minute, and then a signal 10 seconds before the countdown reaches zero.

Question 1

How to activate the hourly beep on the Puma Form watch?

Accepted Answer

The Puma Form watch does not have an hourly beep function. However, this digital sports watch offers a dual daily alarm with an activatable chime, as well as sound signals on the timer.

The chime (sound signal) activates at the same time as the alarm. To use the available alarms:

Press S3 from any mode to access Alarm mode (AL)
Press S2 to select between Alarm 1 and Alarm 2
Press S1 to turn the selected alarm on or off (the chime automatically activates with the alarm)
Press and hold S4 to set the alarm time (the hour blinks, then the minutes)

You can set two independent alarms that will sound at the programmed time each day. A bell icon appears on the screen when an alarm is active. When triggered, the alarm emits a chime for about 20 seconds.

If you are looking for other sound signals, the watch also provides beeps on the timer: 5 beeps at 5 minutes before the countdown ends, 2 beeps at 2 minutes, 1 beep at 1 minute, and then a signal 10 seconds before the countdown reaches zero.

Question 2

How to set up beeps or alerts on my Puma Fit watch?

Accepted Answer

The Puma Fit watch offers two programmable daily alarms with configurable chime.

Setting up an alarm with beep:

Access the Alarm mode and press S2 to choose between AL1 or AL2
Press S4 until the hours start flashing
Use S1 to adjust the values (hours and minutes)
Press S2 to move to the next settings

Activating the chime (beep):

Once the alarm is set, you can enable or disable the chime by pressing the S1 button. The activated alarm icon will appear on the screen to confirm your setting.

Note: The Fit watch does not have a continuous hourly beep function (every hour). It only offers the 2 programmable daily alarms with chime. If you are looking for an alert every hour, check the timer settings or a third-party app if your watch supports custom notifications.

User manual Puma Wristwatch : user manuals and guides in PDF

Models Puma Wristwatch most viewed

Recent questions about Wristwatch Puma