What should I do if no code appears when programming the Thomson ROC 4206 remote control?

Question

Accepted Answer

If no code appears or works when programming your Thomson ROC 4206 remote control, it means that the code for your device could not be entered directly. The remote control has two very effective automatic search methods to find the compatible code without having to enter it manually.

Method C: Manual code search (up to 200 attempts)

Turn on the device you want to control.
Press and hold the SETUP button until the red light stays on (a few seconds).
Press the button corresponding to the type of device: TV, DVD/VCR, SAT/CAB, or AMP.
Point the remote control at the device and press the B button (ON/OFF).
Observe the device: if it turns off, that is the correct code, immediately press the c button to save and finish. If it does not turn off, press B again and wait about 1 second between each attempt (the red light should turn off and then back on). Continue this way up to a maximum of 200 attempts until the device turns off.
As soon as the device turns off, press the c button to memorize the code.

Method D: Automatic search (faster)

Make sure your device is on.
Press and hold the SETUP button until the red light stays on (a few seconds).
Release the SETUP button.
Press the button corresponding to the type of device: TV, DVD/VCR, SAT/CAB, or AMP.
Press PROG+ once: the remote control will then automatically scroll through the complete list of codes (about 1 code per second). You can press PROG+ a second time to reduce the speed (1 code every 3 seconds).
As soon as the device changes or turns off, immediately press the c button to save the code and stop the search. If you react too slowly, use PROG- to go back to the previous code, or B to advance.

Method D is generally faster and simpler if you stay attentive to your device. Between the two methods, your ROC 4206 can test up to 200 different codes for Method C or go through the entire code database with Method D. If the device does not change state with either of these two methods, it is possible that your device is not compatible with the Thomson ROC 4206 remote control, or that it uses a technology other than infrared.

User manual THOMSON Television : user manuals and guides in PDF

Models THOMSON Television most viewed

Other categories THOMSON

Recent questions about Television THOMSON