Q: Can I use detergent with the DEEBOT T80 OMNI?

Yes, you can use detergent with the DEEBOT T80 OMNI. Here’s how to do it: Usage mode: Fill the clean water tank with water Add an appropriate amount of cleaning solution using the cap of the detergent bottle Important: ECOVACS recommends using exclusively the ECOVACS cleaning solution , sold separately at ecovacs.com . This solution ensures full compatibility and the best cleaning performance of your robot. Before use: Make sure that the top covers of the water tanks are securely locked.

Q: Where is the RESET button on the DEEBOT MINI and how do I use it?

The RESET button is located inside the robot, under the dustbin cover . To access it, simply open the cover located on the top of the DEEBOT MINI. Functions of the RESET button Short press: Puts the robot in network configuration mode (WiFi). You will hear a voice message confirming the activation. Use this function to connect the device to the ECOVACS HOME app. Long press (hold down): Restores the robot's default settings. After activation, you will first hear a voice message, followed by the startup music. The DEEBOT MINI then returns to all its factory settings.

Q: How to clean and maintain the DEEBOT T80 OMNI?

Regular cleaning and maintenance of the DEEBOT T80 OMNI are essential to maintain its optimal performance. Here’s how to proceed: Weekly Cleaning Filter: Remove the dustbin, open the lid, and take out the filter. Rinse it with clear water without using a brush, then dry it completely before reinstalling it. Main brush and side brush: Remove the cover, clean the brushes to avoid hair buildup, and use the provided comb brush if necessary. Water tank and components: Remove and clean the clean water tank and the dirty water tank, ensuring that the retention caps are properly installed. Roller pad: Press the release button to remove it, clean it gently, then retract it. Do not pour water directly onto the robot's body. Parts Replacement Frequency Roller mop: every 1-2 months Filter: every 3-6 months Side brush: every 3-6 months For original ECOVACS replacement accessories, visit https://www.ecovacs.com.

Q: How often should I clean the washable mop of the DEEBOT MINI?

The washable mop of the DEEBOT MINI should be cleaned every 1 to 2 months depending on your usage frequency of the robot. To clean it: Remove the mop from the station Rinse it with clear water Let it dry completely in the air before reinstalling it The mop does not require regular replacement (unlike brushes that wear out), but monitor its condition: if it visibly degrades, you can order it from ECOVACS using the model reference DJX11 . To optimize washing performance, also ensure to keep the water tank filled to the recommended level and regularly clean the brushes (weekly) and the filter (also weekly).

Question 1

Can I use detergent with the DEEBOT T80 OMNI?

Accepted Answer

Yes, you can use detergent with the DEEBOT T80 OMNI. Here’s how to do it:

Usage mode:

Fill the clean water tank with water
Add an appropriate amount of cleaning solution using the cap of the detergent bottle

Important: ECOVACS recommends using exclusively the ECOVACS cleaning solution, sold separately at ecovacs.com. This solution ensures full compatibility and the best cleaning performance of your robot.

Before use: Make sure that the top covers of the water tanks are securely locked.

Question 2

How to configure the edge trimming with the GOAT O1200 LiDAR PRO?

Accepted Answer

The GOAT O1200 LiDAR PRO has a dedicated mode for trimming the edges of your garden accurately and intelligently.

Accessing the Trim Mode

From the ECOVACS HOME app, go to "Manually Triggered Tasks" and tap the "Trim" option. You can then select the edges to trim, including the boundaries of the work area and restricted zones.

Automatic Boundary Recognition

The robot has an adaptive mode that allows it to intelligently identify the grass-non-grass transition and adjust its trajectory according to the type of boundary encountered:

Barriers (walls or fences > 5 cm)
Restricted Perimeters (steps or elevations of 2 to 5 cm)
Flat Surfaces at lawn level

Optimizing Edge Cutting

To ensure optimal cutting, the GOAT will trim as close to the edge as possible. When selecting boundaries, avoid areas where there are objects that may be damaged (garden furniture, decorations, etc.).

Question 3

Where is the RESET button on the DEEBOT MINI and how do I use it?

Accepted Answer

The RESET button is located inside the robot, under the dustbin cover. To access it, simply open the cover located on the top of the DEEBOT MINI.

Functions of the RESET button

Short press: Puts the robot in network configuration mode (WiFi). You will hear a voice message confirming the activation. Use this function to connect the device to the ECOVACS HOME app.
Long press (hold down): Restores the robot's default settings. After activation, you will first hear a voice message, followed by the startup music. The DEEBOT MINI then returns to all its factory settings.

Question 4

Are there videos for maintaining the DEEBOT T80 OMNI?

Accepted Answer

The PDF manual for the DEEBOT T80 OMNI does not contain embedded videos. However, it has a detailed maintenance section with complete and precise instructions.

What you will find in the manual:

A maintenance table listing all wear parts and their intervals (mop roller, dust bag, brushes, filters)
Step-by-step instructions for emptying the dustbin, rinsing and drying the filter
Procedures for cleaning the brushes (main and side)
Maintenance of water components (clean and dirty water tanks)
Tips for wiping the sensors and contacts

For video demonstrations, you can check the ECOVACS HOME platform (mobile app) or the official website www.ecovacs.com, which offer additional tools and content.

Question 5

How to clean and maintain the DEEBOT T80 OMNI?

Accepted Answer

Regular cleaning and maintenance of the DEEBOT T80 OMNI are essential to maintain its optimal performance. Here’s how to proceed:

Weekly Cleaning

Filter: Remove the dustbin, open the lid, and take out the filter. Rinse it with clear water without using a brush, then dry it completely before reinstalling it.
Main brush and side brush: Remove the cover, clean the brushes to avoid hair buildup, and use the provided comb brush if necessary.
Water tank and components: Remove and clean the clean water tank and the dirty water tank, ensuring that the retention caps are properly installed.
Roller pad: Press the release button to remove it, clean it gently, then retract it. Do not pour water directly onto the robot's body.

Parts Replacement Frequency

Roller mop: every 1-2 months
Filter: every 3-6 months
Side brush: every 3-6 months

For original ECOVACS replacement accessories, visit https://www.ecovacs.com.

Question 6

How to access mapping in the ECOVACS HOME app?

Accepted Answer

The mapping is launched directly via the ECOVACS HOME app. Here’s how to access it:

Before launching the mapping

Make sure the battery is above 50%
Lift the signal receiver
Remove the panoramic camera cover

Launching the mapping

Go to the mapping section in the ECOVACS HOME app and start the virtual boundary mapping. Let GOAT leave its station and follow it within a 6-meter radius to outline the edges of your lawn.

After the mapping

A 20 to 60-minute map learning phase then generates a complete map. Once finished, you can access map editing and automatically generate mowing schedules.

Question 7

How often should I clean the washable mop of the DEEBOT MINI?

Accepted Answer

The washable mop of the DEEBOT MINI should be cleaned every 1 to 2 months depending on your usage frequency of the robot.

To clean it:

Remove the mop from the station
Rinse it with clear water
Let it dry completely in the air before reinstalling it

The mop does not require regular replacement (unlike brushes that wear out), but monitor its condition: if it visibly degrades, you can order it from ECOVACS using the model reference DJX11.

To optimize washing performance, also ensure to keep the water tank filled to the recommended level and regularly clean the brushes (weekly) and the filter (also weekly).

Question 8

How to reset the GOAT O1200 LiDAR PRO to factory settings?

Accepted Answer

To reset the ECOVACS GOAT O1200 LiDAR PRO to factory settings, follow these steps:

Reset Procedure

1. Press the buttons simultaneously:
Press and hold the ▷ + ⬇ buttons (right arrow + down arrow) at the same time for 5 seconds.

2. Reset confirmation:
The device will automatically reset. You will see a visual or audible indication confirming the operation.

After the reset

After the reset, the device will prompt you to set a new four-digit PIN code to unlock the device. This security feature is particularly useful to prevent theft or accidental use by children.

You will also need to reconfigure:

The Wi-Fi settings (network connection)
The stored navigation maps
Other custom configurations via the ECOVACS HOME app

Note: After a reset, the device will automatically restart when it returns to its charging base.

Question 9

How to adjust the cutting height of the GOAT O1200 LiDAR PRO?

Accepted Answer

The GOAT O1200 LiDAR PRO allows you to adjust the cutting height from 3 to 8 cm (1.2"-3.2"). This height can be adjusted in two ways:

Via the ECOVACS HOME app
Via the control panel directly on the device

For best results, the manual recommends cutting only 1 to 2 cm of grass at a time. Before the first use, pre-cut your lawn to less than 10 cm.

Below are the recommended settings based on the current height of your grass:

Grass height 7-10 cm: set to 5-8 cm (cut 2 cm)
Grass height 4-7 cm: set to 3-6 cm (cut 1 cm)

Question 10

How to adjust the cutting height on the GOAT O1200 LiDAR PRO?

Accepted Answer

The cutting height of the GOAT O1200 LiDAR PRO is adjustable between 3 and 8 cm (1.2"-3.2") using two methods:

Via the ECOVACS HOME mobile app: after mapping your garden, select the area and access the mowing settings to adjust the height
Via the control panel directly on the device

The settings can be customized by area, allowing you to adapt the cutting height to different sections of your lawn.

For optimal results, follow this recommended adjustment table: if your grass is 7-10 cm, set the height to 5-8 cm (cutting 2 cm); if it is 4-7 cm, set it to 3-6 cm (cutting 1 cm). Never cut more than 1 to 2 cm of grass at a time to preserve the health of your lawn.

Before the first use, pre-trim your lawn to a height not exceeding 10 cm with a manual mower and remove obstacles (debris, leaves, toys, stones). This preparation is essential for optimal robot operation.

Thanks to the 360° LiDAR sensors, the front fisheye camera, and the GOAT's obstacle avoidance system, the device intelligently adjusts its trajectory while maintaining the cutting height you have set. The cutting width of 22 cm allows for efficient and even mowing of your garden.

User manual ECOVACS Vacuum Cleaner : user manuals and guides in PDF

Models ECOVACS Vacuum Cleaner most viewed

Other categories ECOVACS

Recent questions about Vacuum Cleaner ECOVACS