Question 1

Does the Bose PowerSpace P4300A support multi-zone configurations? How do I set up the amplifier for multiple zones?

Accepted Answer

Yes, the Bose PowerSpace P4300A fully supports multi-zone configurations. The amplifier has 4 independent channels, each capable of powering a distinct zone with different audio sources or settings. Each channel can deliver up to 300 W at 4Ω, 8Ω, 70V, or 100V loads, allowing you to adapt the amplifier to various residential or commercial installation configurations.

Each channel is configured independently via the DIP switches on the back panel. DIP switch 3 (Global Out) first determines whether you are using 70V or 100V for all channels in high impedance (Hi-Z). Then, DIP switches 4 to 7 allow you to configure each output (1 to 4) in Hi-Z (70V/100V) or Low-Z (4Ω/8Ω). This way, you can mix load types in the same installation: for example, 70V speakers in one zone and 4Ω speakers in another.

The P4300A also offers an I-Share mode that allows you to combine two channels to increase power in a given zone. DIP switches 8 and 9 control this mode: I-Share 1&2 combines channels 1 and 2 to deliver 600 W (at 2–4Ω loads or 70/100V), and I-Share 3&4 combines channels 3 and 4 for the same power. This allows you to have 2 zones with 600 W each instead of 4 zones with 300 W.

To activate the I-Share mode, first turn off the amplifier or put it in standby. Set the corresponding DIP switch (8 or 9) to “On,” then install the jumper provided with the device: for I-Share 1&2, place the jumper on the first 4 output terminals; for I-Share 3&4, place it on the last 4 terminals. Then, wire your speakers using terminals 1+ and 1– (or 2+ and 2–) for I-Share 1&2, or terminals 3+ and 3– (or 4+ and 4–) for I-Share 3&4. Without this jumper, the I-Share mode will not function correctly.

Each channel has an individual output attenuation control on the front panel. To set the levels for the different zones, adjust each output attenuator as needed: in Hi-Z mode (70V/100V), set the attenuator to 0 dB and then adjust the speaker taps; in Low-Z mode (4Ω/8Ω), adjust the attenuator to the desired levels. Note that changing the attenuation of one channel does not affect the other channels, allowing you complete control over each zone. The amplifier also features an Auto-Standby function (DIP switch 1) that puts the device into low power mode after 20 minutes without an audio signal, with automatic activation as soon as a signal is detected.

Question 2

How do I turn off the BOSE SoundTouch Wireless Link Bluetooth receiver without unplugging it?

Accepted Answer

The BOSE SoundTouch Wireless Link Bluetooth receiver does not have a standard power button to completely turn it off without unplugging it. However, here are the options to manage its state:

1. Put it to sleep via the SoundTouch app

You can use the SoundTouch app on your smartphone or tablet to put the device to sleep. This stops audio playback and reduces power consumption without having to unplug the unit.

2. Use the remote control

If you have the remote control provided with the SoundTouch Wireless Link, press the Pause or Stop button to interrupt playback. This does not completely turn it off but puts the device in standby mode.

3. Unplugging necessary for complete shutdown

To completely turn off the receiver and cut all power, it is necessary to unplug it from the electrical outlet. There is no physical power button that allows you to fully turn off the device without unplugging it.

In summary: The SoundTouch Wireless Link does not completely turn off via a button or software command. The best option is to put it to sleep via the app or remote control, and unplug it if you wish to turn it off entirely.

Question 3

Which iOS app is compatible with the BOSE SoundTouch Wireless Link Bluetooth receiver?

Accepted Answer

The Bose SoundTouch Wireless Link audio receiver is compatible with the Bose SoundTouch app, available for free on the App Store for iPhone and iPad. This official Bose app is the main tool for setting up and controlling your receiver.

With the Bose SoundTouch app, you can:

Set up your SoundTouch Wireless Link during the initial setup,
Control music playback on your audio system,
Add and manage different music services (streaming, radio, local music),
Manage your presets and favorite stations,
Change the settings of your receiver (volume, audio source, etc.).

The app works on any iPhone or iPad connected to the same Wi-Fi network as your SoundTouch Wireless Link receiver. You can use the same SoundTouch app on multiple iOS devices using the same Bose account, allowing you to control your audio system from any of your devices.

To install the app, open the App Store on your iPhone or iPad, search for Bose SoundTouch, and download the free app. Make sure your iOS device and your SoundTouch Wireless Link are both connected to the same Wi-Fi network for optimal setup and control.

User manual BOSE Audio Receiver : user manuals and guides in PDF

Models BOSE Audio Receiver most viewed

Other categories BOSE

Recent questions about Audio Receiver BOSE