TL-PA2010PKIT - Powerline adapter TP-LINK - Free user manual and instructions

Product Type	Powerline Network Adapter
Brand	TP-Link
Model	TL-PA2010PKIT
Dimensions (approx)	95 x 55 x 30 mm
Weight	130 g
Power Supply	100-240 V AC, 50/60 Hz
Power Consumption	Less than 4 W
Theoretical Speed	200 Mbps (HomePlug AV)
Ports	1 port Ethernet RJ-45 10/100 Mbps
Pair Button	To secure the Powerline network
LED Indicators	Power, Powerline, Ethernet
Integrated Pass-Through Socket	Yes
Compatibility	All HomePlug AV Powerline adapters
Key Features	Network extension via power lines, simplified pairing
Care and Cleaning	Clean with a soft, dry cloth
Security	128-bit AES encryption via Pair button
Operating Conditions	Temperature 0-40°C, humidity 10-90% (non-condensing)
Warranty	3 years limited
Kit Contents	2 Powerline adapters, 2 Ethernet cables, quick installation guide

Frequently Asked Questions - TL-PA2010PKIT TP-LINK

How to install my TP-Link TL-PA2010PKIT Powerline kit?

Plug one adapter into the router via an Ethernet cable, then plug the other adapter into a power outlet on the same electrical circuit. Wait for the Powerline LEDs to light up, then connect your computer to the second adapter. Enjoy your network!

How to secure my Powerline network?

Press the Pair button on one adapter for 1 second, then within 2 minutes, press the Pair button on the other adapter for 1 second. The network is now encrypted.

What to do if the Powerline LED does not light up?

Check that both adapters are plugged into outlets on the same electrical circuit. If the problem persists, re-pair them using the Pair button. Ensure the outlets are working and that no powerful devices (e.g., dryer) are nearby.

How to reset my Powerline adapter?

Hold down the Pair button until the power LED briefly turns off. You can also use the tpPLC utility for a software reset.

How to add a new Powerline adapter to the existing network?

Press the Pair button on an adapter already in the network for 1 second. Within 2 minutes, press the Pair button on the new adapter for 1 second. It will be automatically integrated into the secure network.

My computer has no Internet access via Powerline, what should I do?

Check that all Powerline adapters are on the same electrical circuit and that their Powerline LEDs are on. Ensure Ethernet cables are properly connected. Test Internet connection by plugging the computer directly into the router. Also check that the computer is on the same subnet as the router.

Can I plug the Powerline adapter into a power strip?

No, always plug Powerline adapters directly into a wall outlet. If you use a power strip, plug it into the pass-through socket of the Powerline adapter, never the other way around. This avoids interference and ensures performance.

What to do if the Powerline adapters disconnect when I move them?

Try other outlets on the same electrical circuit. Re-pair them using the Pair button. Keep adapters away from powerful electrical devices like air conditioners or dryers. If your adapter has a pass-through socket, plug the disruptive device into it to filter noise.

How to get the latest firmware version?

Download the tpPLC utility from the TP-Link website. It will allow you to check and update the firmware of your Powerline adapters to benefit from the latest improvements.

What is the maximum range of the Powerline network?

The range depends on the quality of the electrical circuit. Generally, the Powerline signal can travel up to 300 meters on the same circuit. Performance may be reduced with circuit breakers or noisy electrical devices.

USER MANUAL TL-PA2010PKIT TP-LINK

TP-Link Technologies Co., Ltd. South Building(floors 1,3,4,5) and 28(floors 1-4), Central Science

& Technology Park, Shennan Rd, Nanshan, Shenzhen, China

TP-Link UK Limited Unit 2 & 3 Riverview (142-144), Cardiff Road, Reading, RG1 8EW

TP-Link Hellas Ltd. Marathonodromou 77, Marousi 151 24, Greece

Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2018 TP-Link Technologies Co., Ltd. All rights reserved.

MADE IN CHINA

7106507904 REV2.1.1

tp-link

Quick Installation Guide

Powerline Adapter

CONTENTS

01 / Deutsch
05 / English
09 / Español
13 / Ελληνικά
17 / Français
21 / Italiano
25 / Português
29 / Suomi
33 / Nederlands
37 / Svenska
41 / Norsk
45 / Dansk

Plug and Play

graph LR
    A["Internet"] --> B["WAN LAN"]
    B --> C["Adapter"]
    C --> D["Laptop"]
    D --> E["Adapter"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333

1. Connect one adapter to a LAN port of your router using an Ethernet cable.
2. Plug the other adapter into the wall outlets on the same electrical circuit.
3. Wait until the Powerline LED 📊 on any adapter turns on.
4. Connect your computer to the adapter using an Ethernet cable.
5. Enjoy!

More: To add additional Powerline adapters and extenders with the default settings, simply plug them into the wall outlets on the same electrical circuit.

English

Attention

• Plug the powerline devices directly into the wall outlets but not the power strips.
• For passthrough powerline devices, plug the power strips into the integrated electrical sockets of the powerline devices.

Secure the Powerline Network with the Pair Button

Tips: We recommend that you plug in the powerline devices near each other when pairing.

Set up a secure network:

1 Press the Pair button for 1 second on one adapter.

2 Within 2 minutes, press the Pair button for 1 second on another adapter.

3 Done.

graph TD
    A["tp-link"] -->|Blinking| B["Power icon"]
    B --> C["On button symbol"]

If you have more than 2 powerline devices, repeat the steps below on each additional devices to be configured:

1 Press the Pair button for 1 second on any powerline device in the secure network.

2 Within 2 minutes, press the Pair button for 1 second on the additional powerline device.

3 Done.

FAQ (Frequently Asked Questions)

Q1. How do I reset my powerline adapter?

A1. With the powerline adapter plugged into to the electrical outlet, press and hold the Pair button until the Power LED ⏻ goes off momentarily and comes back on.

A2. Use the tpPLC Utility to reset the powerline adapter.

English

Q2. How to troubleshoot if there is no internet connection in my powerline network?

A1. Make sure all powerline devices are on the same electrical circuit.

A2. Make sure all Powerline LEDs are on. If not, pair your adapters and extenders again.

A3. Make sure all hardware connections are correctly and securely connected.

A4. Check if you have an internet connection by connecting the computer directly to the modem or router.

A5. Make sure your computer's IP address is in the same segment as your router's.

Q3. What can I do if a successfully-paired powerline device does not reconnect after it has been moved to a new location?

A1. Try another socket and make sure it is on the same electrical circuit.

A2. Try to pair it again, and make sure the Powerline LED is on.

A3. Check for possible interference, such as a washer, air conditioner or other household appliances that may be too close to one of the powerline devices. Plug the appliance into the integrated electrical socket (if the powerline device has one) to remove some electrical noise.

More advanced configurations, such as firmware upgrade and QoS configuration, can be accessed through the tpPLC Utility. You can install the tpPLC Utility from the TP-Link official website.

Plug and Play

graph LR
    A["Internet"] --> B["WAN LAN"]
    B --> C["Powerline"]
    C --> D["Adaptador"]
    D --> E["Laptop"]
    E --> F["Adaptador"]

FAQ (Perguntas Frequentes)

graph LR
    A["Power Symbol"] --> B["House Icon"]
    B --> C["Ground Symbol"]

TP-Link hereby declares that this device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.

The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce.

Español

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• For passthrough devices, plug the power strips into the integrated electrical sockets of the devices, but devices of the same or another type not be stacked in normal use.
• Plug the powerline devices directly into the wall outlets but not the power strips.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

TP-Link Three Years Limited Product Warranty

For TP-Link Branded Products Only.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).

TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.

TP-Link warrants the TP-Link branded hardware product contained in the original packaging against defects in materials and workmanship when used normally in according with TP-Link's guidelines for a period of THREE YEARS form the date of original retail purchase by the end-user purchaser.

Español

http://www.tp-link.com