Vitek VT-1763 W - Humidifier

VT-1763 W - Humidifier Vitek - Free user manual and instructions

Find the device manual for free VT-1763 W Vitek in PDF.

📄 32 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Vitek VT-1763 W - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Type Humidifier
Brand Vitek
Model VT-1763 W
Color White
Dimensions (W x D x H) 200 x 200 x 300 mm
Weight 1.5 kg
Power Supply AC 220-240 V, 50 Hz
Power Consumption 25 W
Water Tank Capacity 3 L
Humidification Method Ultrasonic
Mist Output Adjustable, up to 300 ml/h
Noise Level < 35 dB(A)
Coverage Area Up to 30 m²
Automatic Shut-off Yes, when water tank is empty
Filter Type None (ultrasonic, no filter required)
Control Type Mechanical knob
Cleaning Weekly cleaning of tank and transducer with vinegar or descaling solution
Safety Features Overheat protection, auto power-off when empty
Accessories Included User manual, warranty card
Warranty 1 year

Frequently Asked Questions - VT-1763 W Vitek

How do I clean the humidifier?
Unplug the unit and empty the water tank. Clean the tank and transducer with a soft cloth and a mixture of water and white vinegar. Rinse thoroughly and dry before next use. Do not use abrasive cleaners.
Why is there no mist coming out?
Check that the water tank is filled properly and seated correctly. Ensure the power is on and the mist output knob is turned up. If still no mist, the transducer may need cleaning due to mineral buildup.
Can I use essential oils in this humidifier?
No, this ultrasonic humidifier is not designed for essential oils. Adding oils can damage the unit and void the warranty. Use only clean water.
How often should I clean the humidifier?
It is recommended to clean the tank and transducer weekly to prevent mold and mineral deposits. Always empty and dry the tank if not used for a long period.
What type of water should I use?
Use distilled or demineralized water to reduce white dust and mineral buildup. Tap water may cause deposits on the transducer.
How do I adjust the mist output?
Turn the control knob on the front of the unit to adjust the mist volume from low to high. The LED indicator may show the setting.
Does the humidifier shut off automatically?
Yes, the unit has an automatic shut-off feature that turns it off when the water tank is empty, preventing damage.
How long does the water last?
At maximum mist output, the 3L tank lasts approximately 10-12 hours. At minimum, it can last up to 24 hours. Actual time depends on room conditions.
Why is there white dust on furniture?
White dust is caused by minerals in tap water. Use distilled water or clean the transducer regularly. The unit may produce more dust if water is hard.
What is the recommended humidity level?
The ideal indoor humidity is 40-60%. This humidifier can help maintain that level in medium-sized rooms. Use a hygrometer to monitor.

User questions about VT-1763 W Vitek

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Humidifier in PDF format for free! Find your manual VT-1763 W - Vitek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VT-1763 W by Vitek.

USER MANUAL VT-1763 W Vitek

Insufficient room humidity negatively affects human & pets' health as well as condition of plants and furniture.

The recommended comfortable room humidity level should be within 50%-60%.

The unit is intended for air humidifying. This unit enables to improve the air quality in the room.

Description

  1. «lonization» mode indicator
  2. On/Off knob (on/off)
  3. Mist release intensity control
  4. «lonization» button
  5. Front panel
  6. Lid with mist release nozzle
  7. Water tank
  8. Water inlet
  9. Cartridge filter
  10. Water tank lid
  11. On/no water indication
  12. Process chamber with sprayer
  13. Humidifier body
  14. Cleaning brush for the sprayer

Attention!

For additional protection it is reasonable to install a residual current device (RCD) with nominal operation current not exceeding 30 mA. To install an RCD, contact a specialist.

SAFETY MEASURES

Before using the unit, read this instruction manual carefully. Keep this manual for future reference.

Use the unit according to its intended purpose only, as it is stated in this user manual. Mishandling the unit can lead to its breakage and cause harm to the user or damage to his/her property.

  • Before switching the unit on, make sure that your home mains voltage corresponds to the unit operating voltage.
  • To avoid fire, do not use adapters for connecting the unit to the mains.
  • Place the unit on a flat, moisture-resistant surface. The distance to the walls, other furniture and interior objects should be at least 30 cm.
  • Do not place the unit on carpet surfaces with high pile.
  • Do not place the humidifier in places exposed to direct sunlight, high temperatures, near computers or other sensitive electronic appliances.
  • Do not use the unit outdoors.

  • Use only the removable parts supplied with the unit.

  • Do not operate the unit without water and switch the unit off immediately when the water tank becomes empty.
  • Do not use carbonated or dirty water or any perfume additives.
  • Do not switch the unit on if the filter and water tank are not installed.
  • Unplug the unit before removing the water tank.
  • Do not cover the unit.
  • Do not cover the unit openings and avoid getting of foreign objects inside them.
  • Do not immerse the unit body, the power plug or the power cord into water or any other liquids.
  • Do not move or tilt the unit during its operation.
    • Always unplug the unit and pour out water from the water tank and the process chamber before cleaning or if you do not use the air humidifier.
  • Before moving the unit to another place, unplug it and pour out water from the water tank and the process chamber. When moving the unit, hold it by the base with both hands.
  • Do not touch the power plug with wet hands.
  • Clean the unit regularly.
  • Do not allow children to touch the unit body and the power cord during the unit operation.
  • This unit is not intended for usage by children under 8 years of age.
  • This unit is not intended for usage by people (including children over 8) with physical, neural and mental disorders or with insufficient experience or knowledge. Such persons can use this unit only if they are under supervision of a person who is responsible for their safety and if they are given all the necessary and understandable instructions concerning the safe usage of the unit and information about danger that can be caused by its improper usage.
  • Do not leave children unattended; do not allow children to use the unit as a toy.
  • For children safety reasons do not leave polyethylene bags, used as a packaging, unattended.
    Attention! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!
  • Never pull the power cord, when disconnecting the unit from the mains, take the power plug and carefully remove it from the mains socket.
  • Never use the unit if the power cord or the power plug is damaged, if the unit works improperly or after it was dropped.

ENGLISH

  • Do not disassemble the unit by yourself, if any malfunction is detected or after it was dropped, apply to the nearest authorized service center.
  • Transport the unit in the original package only.
  • Keep the unit out of reach of children and disabled persons.

After unit transportation or storage at low temperature, it is necessary to keep it for at least two hours at room temperature before switching on.

- Unpack the air humidifier, remove any stickers and package materials that can prevent unit operation. Check the unit for damages. In case of damages do not switch the unit on.

Note:

Use the humidifier at the room temperature from +5°C to +40°C, and at relative humidity less than 80%.

Water temperature should not exceed +40°C.

- Before plugging the unit in, make sure that your home mains voltage corresponds to unit operating voltage.

Usage of the unit

  1. Remove the lid (6) from the water tank (7).
  2. Remove the water tank (7) from the unit body.
  3. Turn over the tank (7), unscrew the lid (10) with the cartridge filter by rotating it counterclockwise.
  4. Fill the tank (7) with necessary amount of water, insert the lid (10) with the cartridge filter and screw it rotating it clockwise.
  5. Place the filled water tank (7) on the unit body.
  6. Insert the power plug into the mains socket.
  7. Switch the humidifier on, turning the knob (2) clockwise, the operation indicator (11) will light up blue and the mist will be released intensively from the lid nozzle (6). The nozzle rotates by 180^ around its axis, which allows to change the mist flow direction without relocating the air humidifier.
  8. Set the mist release intensity by turning the knob (3). Increase it by turning the knob clockwise, decrease by turning it counterclockwise.
  9. To switch the ionization mode on, press the button (4), the indicator (1) will light up. To switch

the ionization mode off, press the button (4) again, the indicator (1) will go out.

  1. If the water tank (7) is empty, the indicator (11) will light up red.
  2. Switch the air humidifier off, turning the knob (2) counterclockwise till clicking, the indicator (11) will go out; after that unplug the unit. Fill the tank (7) with water, install it to its place and switch the unit on.
  3. After the unit operation, switch the air humidifier off by turning the knob (2) counterclockwise.

Cleaning and care

Warning! Always switch the unit off and unplug it before cleaning.

  • Hard water causes the appearance of mineral scale on the sprayer, on the inner parts of the body and in the water tank; it leads to improper operation of the humidifier and appearance of white deposits on interior objects.
  • To avoid this, it is necessary to clean the sprayer weekly and to change water as often as possible, as well as to clean the cartridge filter.
  • If you are not going to use the humidifier for a long time, pour out water from the tank and the operating chamber of the sprayer, wash the water tank, wash and clean the operating chamber of the sprayer and the sprayer itself, dry the unit thoroughly and take it away for storage.

Weekly care

  1. Once a week wash the water tank (7) and the process chamber under the tank (12) thoroughly with a neutral detergent solution.
  2. Then carefully rinse them with water.
  3. Add 5-10 drops of the detergent on the sprayer (12); wait for about 2-5 minutes. Remove the deposit from the sprayer (12) surface with the brush (14).

Note:

- As a cleaning agent for the sprayer you can use a descaling agent for kettles.

- Do not immerse the air humidifier body into water or other liquids.

Filter cleaning

  1. Clean the cartridge filter (9) after passing of about 200 l water through it, and more often when using hard water or if a white deposit appears on the furniture.
  2. Remove the lid (6) from the water tank (7) and remove the tank from the unit body (13).

ENGLISH

Troubleshooting

Failure Possible causes Troubleshooting
The operation indicator doesn’t light up, no mist release.No voltage in the power supply systemConnect the unit to the mains.
Plug another known good appliance into the socket to make sure that the socket is operational.
The operation indicator flashes red, no mist release.The water tank is empty.Fill the water tank with water.
Mist smells unpleasantly.First usage of the unit.Unscrew the water tank lid, pour out the water and leave the tank open for 12 hours in a cool darkened place.
Dirty or stale water.Unplug the unit, remove the water tank, pour out the water, wash the tank and fill it with clean boiled or distilled water.
Low mist release intensityThe sprayer is dirty.Unplug the unit and clean the sprayer.
Foreign noise is heard during the operation of the humidifierThe unit is placed on an uneven or unstable surface.Unplug the unit and level the unit body or move the air humidifier to another place.
  1. Turn over the tank (7), unscrew the lid (10) rotating it counterclockwise, unscrew the cartridge filter (9), rotating it counterclockwise.
  2. Put the cartridge filter (9) into a container with vinegar for 10 minutes, then take the cartridge filter (9) out and rinse with running water.
  3. Install the cartridge filter (9) back on the lid (10), rotating it clockwise.

Storage

  • If you are not going to use the unit for a long time and want to take it away for storage, make sure that all its parts are dry, including the process chamber of the sprayer.
  • Do not store the unit with water in the water tank and the operating chamber of the sprayer.
  • Clean and dry the cartridge filter before taking it away for storage. Keep the cartridge filter in a cool darkened place.

Keep the humidifier away from children in a dry cool place.

Note:

Non-observance of the rules for cleaning the sprayer from mineral deposits may affect the overall performance of the unit. If this happens clean the unit. If the tap water that is being used is too hard, use domestic water filters to clean the water or mix tap water with distilled water in proportion 1:1.

Delivery set

Air humidifier - 1 pc.

Removable lid with nozzle - 1 pc.

Removable water tank - 1 pc.

Removable water tank lid - 1 pc.

Instruction manual - 1 pc.

Technical specifications

Power supply: 220-240 V \~ 50 Hz

Power consumption: 30 W

Water tank capacity: 3.5 L

Water discharge: 250 ml/h

Humidified area: up to 25 m2

The manufacturer preserves the right to change design and specifications of the unit without a preliminary notification.

Unit operating life is 3 years

Guarantee

Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

Vitek VT-1763 W - Guarantee - 1

This product conforms to the EMC-Requirements as laid down by the Council Directive 2004/108/EC and to the Low Voltage Regulation (2006/95/EC)

DEUTSCH

LUFTBEFEUCHTER

A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four figures indicating the production date. For example, serial number 0606xxxxxxx means that the item was manufactured in June (the sixth month) 2006.

DE

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vitek

Model : VT-1763 W

Category : Humidifier