VT-1761 BK - Humidifier Vitek - Free user manual and instructions

Product type	Air humidifier
Brand	Vitek
Model	VT-1761 BK
Color	Black
Power supply	220-230 V ~ 50 Hz
Power consumption	40 W
Water tank capacity	5 L
Water consumption	400 ml/h
Humidification area	Up to 40 m²
Ion emission	2,000,000 ~ 3,000,000 ions/cm³
Ozone emission	0.05 PPM
Control type	Rotary knobs
Humidistat (humidity regulator)	Yes, adjustable Min-Max
Ionization function	Yes, with separate switch and indicator
Water level indicator	Red LED (Humidify/Refill)
Spotlight in water tank	Yes
Filter type	Replaceable filter-cartridge
Nebulizer type	Ultrasonic
Cleaning brush included	Yes
Safety features	Automatic shut-off when empty (indicator), do not operate without water

Frequently Asked Questions - VT-1761 BK Vitek

How do I fill the water tank?

Remove the water tank using the handle (9). Turn it over and unscrew the cap (14) counterclockwise. Fill with water (max 40°C), then screw the cap back on and place the tank back on the body.

How do I turn on the humidifier and adjust steam intensity?

Plug in the humidifier. Turn the power/steam control knob (2) clockwise. The green indicator (5) will light. Adjust the steam intensity by turning the same knob further.

What does the red indicator light mean?

The red Humidify/Refill indicator (5) lights up when the water tank is empty. Refill the tank to continue operation.

How do I use the ionization function?

Press the ION button (3) to turn on ionization; the ION indicator (4) will light. Press again to turn off.

How should I clean the humidifier?

Weekly, wash the water tank and the compartment under it with a neutral detergent solution. To clean the nebulizer (15), drip 5-10 drops of detergent, wait 2-5 minutes, then scrub with the brush (18). Rinse thoroughly.

How do I clean the filter-cartridge?

Remove the filter-cartridge (13) by unscrewing it counterclockwise. Soak it in vinegar for 10 minutes, then rinse under running water. Screw it back on clockwise. Clean after every 1000 L of water or more often if hard water.

Can I use essential oils or perfume additives?

No, do not use carbonated water or perfume additives, as they may damage the device.

Why is there white dust on furniture?

White dust is caused by minerals in hard water. Use filtered or distilled water to reduce this, and clean the nebulizer and filter regularly.

What type of water should I use?

Use clean, cold tap water. If water is very hard, use filtered or distilled water to prevent scale buildup. Water temperature should not exceed 40°C.

How do I store the humidifier when not in use?

Empty all water from the tank and operational compartment. Clean and dry all parts thoroughly, including the nebulizer and filter. Store in a cool, dry place out of reach of children.

USER MANUAL VT-1761 BK Vitek

ENGLISH

AIR HUMIDIFIER

DESCRIPTION

1. Indoor moisture regulator «Humidistat»
2. Power switch, steam-out intensity regulator
3. Ionization switch «lon»
4. Ionization indicator «lon»
5. Switch / refill indicator «Humidify/Refill»
6. Front panel
7. Vented cap for steam-out
8. Vents for steam-out
9. Handle for removing water tank from the body
10. Water tank
11. Water pouring hole
12. Handle for convenience when refilling/carrying water tank
13. Filter-cartridge
14. Water tank cap
15. «Nebulizer»
16. Humidifier body
17. Water tank spot lighting
18. Cleaning scrub for «nebulizer»

SAFETY INSTRUCTIONS

Before starting using the device read carefully these instructions and keep them, use them as reference material.

• Ensure that operating voltage of the device corresponds to the circuit voltage.
• Place the device on a flat damp-proof surface. Distance from walls should be no less than 15 cm.
• Do not point the mist nozzle at wood furniture, electric appliances, books and surfaces that could be damaged by water.
• Do not place humidifier in direct sunlight, high-temperature areas, near

computers or sensitive electronic equipment.

• Do not leave the device unattended in a closed room, since air could become saturated and leave condensation on walls or furniture, that is why it is recommended that you leave the door to the room with humidifier slightly open.
• Do not use the device outdoors.
• Use only those removal parts that are included into delivery package.
• Do not allow children to use the device as a toy.
• Be careful, when the device is used by children or by handicapped people.
• This device should not be used by children or by handicapped people, unless they are provided with relevant and legible safety instructions and are aware of hazards arising from misuse of the device by a responsible person.
• Do not operate the device without water; turn it off, when water tank is empty.
• Do not use carbonated water and perfume additives.
• Unplug the device before removing water tank.
• Do not cover steam-out vents and keep from falling any objects into them.
• Do not immerse the body into water or other liquids.
• Do not move or bend the device while it is operating.
• Always unplug the device and empty it when cleaning or when not in operation. If you want to move the device to another place, first of all unplug it.
• Do not touch the plug of the power cord with wet hands.
• Before using the device inspect the power cord and ensure that it is not damaged. Do not use the device when its power cord is damaged.

ENGLISH

• Do not dismantle the device on your own, in case of disorder refer to the nearest authorized service center.
• Clean the device regularly, keep from scratch appearance on a nebulizer.
• Store the device in places out of reach of children.

FOR HOME USE ONLY

USE OF HUMIDIFIER

Unpack the device and remove all packing materials. Inspect the device for damage. If there is any damage do not turn on the device.

Note:

• if the humidifier was exposed to negative temperatures, then before the first time use it is recommended that you keep it at room temperature during 30 minutes.
• use the humidifier at indoor temperature from +5 to +40°C, and relative humidity no less than 80%.
• the temperature of utilized water should not exceed +40°C.

Before plugging in ensure that the power network voltage corresponds to the operating voltage of the device.

1. Take the handle (9) and remove water tank (10) from the body (16).
2. Turn over water tank (10), remove the top cover (14), by turning it counterclockwise. Fill the water tank (10) with the necessary quantity of water and secure the top cover (14), by turning it clockwise.
3. Fix the filled water tank (10) to the body of the device (16). Wait till the working compartment is filled with water.

4. Plug in the humidifier.

5. Turn on the humidifier, by turning the handle (2) clockwise, indicator (5) will turn green, the spot lighting of regulators (1) and (2) and of water tank (17) will turn on.

6. Establish steam-out intensity by turning the handle (2).
7. By a regulator of maintaining relative indoor humidity (1) «Humidistat», establish the boundary value of maintaining indoor humidity from «Min» to «Max».

- if humidity in a room is higher than a set one on the control knob(1), the moisturizer cannot be turned on in a steam-out mode.

1. To turn on ionization mode push the button (3) «ION», in the process the LED light (4) comes on. To turn off ionization mode push the button (3) one more time, the light (4) goes out.
2. On completion of work turn off the device by setting the control (2) in «OFF» position, in the process the LED light (5) goes out, the booster light of the control knobs (1) and (2) shuts down.

Note:

• (17)the booster light lamp helps you to estimate the quantity of water in the reservoir.
• if the water in the reservoir (10) is over, the red LED light (5) «Humidify/Refill» is on, remove the reservoir and fill it with water.

ENGLISH

MAINTENANCE AND CLEANING

Warning! Always turn off and unplug the device before cleaning.

Hard water causes scale formation on the «sprayer», inner parts of the body and water reservoir. This leads to the deterioration of operation of the moisturizer and to the onset of white thin coat on the objects of interior. In order to avoid this, it is necessary to clean the sprayer weekly, to change water as often as possible and to make cleaning of a filter-cartridge (13).

In case you are not going to use the moisturizer for a long time: - pour the water out of reservoir and operational compartment of the «sprayer», wash the reservoir, wash and clean the operational compartment of the «sprayer» and «sprayer» itself, dry carefully and store the device.

Weekly maintenance

• Once a week wash carefully the water reservoir (10) and operational compartment under the reservoir (10) with the neutral detergent solution. Then rinse them carefully out with water.
• Drip 5-10 drops of detergent to the «sprayer» (15); wait about 2-5 minutes. Using a brush (18), remove the thin coat from the surface of the «sprayer» (15).

Note:

- it is possible to use antisludge agent as a detergent for «sprayer»

- Do not dip the body of the device into the water or any other liquids.

Cleaning of filter

• Clean filter (13) after going through it of about 1000 l of water. In case of hard water or onset of «white thin coat» on furniture, clean it more often.
  • Take the control handle(9) and remove the water reservoir (10) from the body (16).
• Turn the reservoir over (10), turn off the cover (14) turning it counter-clockwise, turn off the filter-cartridge (13) turning it counter-clockwise.
• Place the filter-cartridge (13) for 10 min into the vessel with the vinegar, remove the filter-cartridge (13) and rinse it off under the running water.
• Place the filter-cartridge (13) back on the cover (14) turning it clockwise.

Storage

• If you are not going to use the device for a long time and you want to put it away, make sure of all its parts to be dry, including the operational compartment of the «sprayer».
• Do not store the device with the water in reservoir or in the operational compartment of the «sprayer».
• Before to take the filter-cartridge away for storage, clean it and dry, keep the filter-cartridge in a cool dark place.
  Store the moisturizer in a dry cool place, unavailable for children.

ENGLISH

TROUBLESHOOTING

Before refer to the service center, look through the following troubles:

Trouble Probable	reason Troubleshooting
Moisturizer doesn’t operate	The device is unplugged Plug the device in
	There is no water in the reservoir, light (5) is red	Fill the reservoir with water
«Steam» has an unpleasant smell	It’s normal effect for a new device	Turn off the cover of the water reservoir and leave it in a dark cool room for some hours
	There is dirty water in the reservoir	Clean the reservoir and fill it with the clean water
Low intensity of the steam-out	The «sprayer» is foul Clean the part of the sprayer

Note:

- If the rules of the device cleaning aren't kept, the efficiency of the device operation can descent. In this case clean the device and henceforth use filtered or distilled water.

Specification:

Power supply: 220-230 V \~ 50 Hz

Power consumption: 40 W

Emission of ions: 2.000.000 \~ 3.000.000 lon /cm²

Emission of ozone: 0.05 PPM

Vessel for water: 5 l

Expenditure of water: 400 ml/h

Area of moistening: to 40 m²

Specifications subject to change without prior notice.

Service life of appliance - 3 years

GUARANTEE

Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

This product conforms to the EMC-Requirements as laid down by the Council Directive 89/336/EEC and to the Law Voltage Regulation (73/23 EEC)

DEUTSCH

LUFTBEFEUCHTER

BESCHREIBUNG

A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four figures indicating the production date. For example, serial number 0606xxxxxxx means that the item was manufactured in June (the sixth month) 2006.

DE