VT-1236 VT - Iron Vitek - Free user manual and instructions

Product Type	Steam Iron
Brand	Vitek
Model	VT-1236 VT
Soleplate Material	Ceramic
Power	2000 W
Voltage	220-240 V, 50/60 Hz
Water Tank Capacity	300 ml
Steam Output (Continuous)	Up to 40 g/min
Steam Burst	Up to 150 g/min
Spray Function	Yes
Anti-Drip System	Yes
Anti-Calc System	Yes
Auto Shut-Off	Yes, 8 min vertical / 30 sec horizontal
Self-Cleaning	Yes
Cord Length	2.5 m
Dimensions (W x D x H)	30 x 12 x 15 cm
Weight	1.2 kg
Water Fill Opening	Large opening with cap
Heating Indicator Light	Yes
Temperature Settings	Adjustable thermostat
Fabric Guide	Yes, on dial
Care and Maintenance	Descale periodically; clean soleplate with damp cloth
Safety	Thermal fuse, auto shut-off
Spare Parts Availability	Soleplate, water tank cap, spray nozzle available from service centers

Frequently Asked Questions - VT-1236 VT Vitek

How do I descale my Vitek VT-1236 VT iron?

Mix equal parts vinegar and water, fill the tank, set to high heat (no steam), let it steam for 5 minutes, then rinse with clean water. Use the self-cleaning function if available.

What type of water should I use?

Use distilled or demineralized water to prevent mineral buildup. Avoid tap water in hard water areas.

Why does my iron leak water?

The anti-drip system may be clogged. Clean the soleplate and ensure the temperature is high enough for steam. Do not overfill the tank.

How do I clean the soleplate?

Unplug and let cool. Wipe with a damp cloth. For stubborn residue, use a mixture of baking soda and water on a soft cloth. Avoid abrasive cleaners.

What does the auto shut-off feature do?

The iron automatically turns off after 8 minutes of vertical inactivity or 30 seconds if left horizontally or tipped over, preventing accidents.

Can I use the iron without water?

Yes, you can use it as a dry iron. Set the temperature according to fabric type. Do not press the steam button when empty.

How do I use the spray function?

Fill the water tank and press the spray button located near the handle. This mists water onto the fabric for stubborn wrinkles.

What is the maximum steam burst?

The steam burst function delivers up to 150 g/min of steam to tackle deep wrinkles. Wait a few seconds between bursts for pressure to build.

How do I store the iron?

Empty the water tank completely, let it cool, wrap the cord loosely, and store upright in a dry place. Do not store with water inside.

Where can I get replacement parts?

Contact Vitek authorized service centers or visit the official website. Common spares include soleplate, cap, and spray nozzle.

USER MANUAL VT-1236 VT Vitek

Simple illustration of a pitcher with a label showing number 14 (no text or symbols on the pitcher itself)

ENGLISH

. ATTENTION!

- Do not use the iron after dropping it, in case of visible damage or leakage.

- Place the iron on a flat stable surface or use a stable ironing board.

- Do not use the iron if the plug or the power cord is damaged or if there are any other damages in the unit.

· Always take the power plug out of the mains socket before filling the water tank with water.

· The water inlet lid should be closed during ironing.

- Attention! The surfaces of the iron get hot during operation. To avoid burns, do not touch hot surfaces of the iron and do not expose open parts of your body to outgoing steam.

- Pour out water from the water tank only after unplugging the iron.

- Never leave the plugged in iron unattended.

- This unit is not intended for usage by children under 8 years of age. Place the unit out of reach of children under 8 years of age during the operation and cooling down.

- This unit is not intended for usage by people (including children over 8) with physical, neural, mental disorders or with insufficient experience or knowledge. Such persons can use this unit only if they are under supervision of a person who is responsible for their safety and if they are given all the necessary and understandable instructions concerning the safe usage of the unit and information about danger that can be caused by its improper usage.

ENGLISH

STEAM IRON

Instruction manual

The iron is intended for ironing clothes, bedding and for vertical steaming of fabrics.

Description

1. Water spray nozzle
2. Water inlet lid
3. Continuous steam supply knob
4. Burst of steam button
5. Water spray button
6. Handle
7. Pilot lamp of the heating element
8. Iron base
9. Water tank
10. Temperature control knob
11. Self-clean mode button «Self Clean»
12. «MAX» water level mark
13. Soleplate
14. Beaker

SAFETY MEASURES

Before using the unit, read this instruction manual carefully and keep it for future reference.

Use the unit according to its intended purpose only, as it is stated in this user manual.

Mishandling the unit can lead to its breakage and cause harm to the user or damage to his/her property.

• Before switching the iron on, make sure that the mains voltage corresponds to the iron operating voltage.
• The power cord is equipped with a “europlug”; plug it into the socket with a reliable grounding contact.
• To avoid fire, do not use adapters for connecting the unit to the mains.
• To avoid mains overloading, do not switch on many electrical appliances with high power consumption at the same time.
• Do not fill the water tank with scented liquids, vinegar, starch solution, descaling reagents, chemicals etc.

- Provide that the power cord is not on the ironing board and make sure that it does not touch hot surfaces.

- Do not leave the unit unattended. During operation breaks put the iron on the base (in vertical position).

• Before plugging/unplugging the iron, set the temperature control knob to the minimum position and switch the continuous steam supply off.
  • Always unplug the iron if you do not use it.
• To unplug the iron always hold the power plug, never pull the power cord.
• To avoid electric shock do not immerse the iron, the power cord and the plug into water or any other liquids.
• Before taking the iron away, let the unit cool down completely and pour out the remaining water.
• Clean the unit regularly.
• Do not immerse the unit body, the power plug or the power cord into water or other liquids.
• Do not touch the unit body and the power plug with wet hands.
• Do not allow children to touch the unit body and the power cord during the unit operation.
• Do not leave children unattended. Do not allow children to use the unit as a toy.
• For children safety reasons do not leave polyethylene bags, used as packaging, unattended.
  Attention! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!
• Do not disassemble the unit by yourself, if any malfunction is detected or after the iron was dropped, apply to the nearest authorized service center.
• Transport the unit in the original package only.
• Keep the unit out of reach of children and disabled persons.
• During ironing and after it do not touch the unit surface marked with the symbol. Danger of burns!

After unit transportation or storage at low temperature, it is necessary to keep it for at least two hours at room temperature before switching on.

ENGLISH

• Unpack the iron; remove the protection from the iron soleplate (13), if any.
• Check the unit for damages; do not use the iron in case of damages.
• Make sure that the voltage of the mains corresponds to the operating voltage of the iron.

WATER SELECTION

Use tap water to fill the tank. If tap water is hard, it is recommended to mix it with distilled water in proportion 1:1, if tap water is too hard, mix it with distilled water in proportion 1:2 or use distilled water only.

FILLING THE WATER TANK

Before filling the tank with water make sure that the unit is unplugged.

• Set the temperature control knob (10) to the «MIN» position and the continuous steam supply knob (3) to the «∅» position.
• Open the water inlet lid (2).
• Pour the water into the water tank (9) using the beaker (14) and then close the lid (2).

Notes:

• Do not fill the water tank (9) with scented liquids, vinegar, starch solution, descaling reagents, chemical agents etc.
• Do not exceed the «MAX» mark (12).
• If you need to refill water during ironing, switch the iron off and unplug it.

IRONING TEMPERATURE

• Always check the recommended ironing temperature indicated on the tag before ironing.
• If there is no tag with recommended ironing temperature, but you know the type of fabric, refer to the following table to determine the proper ironing temperature.

Symbol	Fabric type (temperature)
.	Synthetics, nylon, acrylic, polyester (low temperature)
··Silk/wool (medium temperature)

...	Cotton, linen (high temperature)
MAX	Maximum temperature

• This table is only valid for smooth materials. It is better to iron other types of fabrics (crimped, raised etc.) at low temperature.
• Sort items by ironing temperature first: synthetics to synthetics, wool to wool, cotton to cotton etc.
• The iron heats up faster than it cools down. For this reason it is recommended to begin ironing at low temperature (for instance, synthetic fabrics).
  • After that start ironing at higher temperatures (silk, wool). Cotton and linen items should be ironed last.
• If an item is made of mixed fabrics, the iron should be set to the lowest temperature (for instance, if an item is made from acrylic and cotton, it should be ironed at temperature used for acrylic ironing «•»).
• If you cannot define the fabric structure, find a place that is hidden while wearing and select the ironing temperature experimentally (always start with the lowest temperature and raise it gradually until you get the desired result).
• Corduroy and other fabrics that become glossy quickly should be ironed strictly in one direction (in the direction of the pile) with little pressure.
  • To avoid appearance of glossy spots on synthetic and silk fabrics, iron them backside.

SETTING THE IRONING TEMPERATURE

• Place the iron on its base (8).
• Insert the power plug into the mains socket.
• Turn the control knob (10) to set the required ironing temperature: «•», «••», «•••» or «MAX», depending on the type of fabric, the pilot lamp (7) will light up.
• When the soleplate (13) reaches the set temperature, the pilot lamp (7) will go out, you can start ironing.

Note: While the first switching on the heating element of the iron burns, therefore occurrence of foreign smell and a small amount of smoke is possible, it is normal.

ENGLISH

Water spray

• You can dampen the fabric by pressing the water spray button (5) several times.
• Make sure that there is enough water in the water tank (9).

DRY IRONING

• Place the iron on its base (8).
• Insert the power plug into the mains socket.
• Turn the control knob (10) to set the required ironing temperature: «•», «••», «•••» or «MAX», depending on the type of fabric, the pilot lamp (7) will light up.
• Set the continuous steam supply knob (3) to the position « 🚙 » (continuous steam supply is off).
• When the soleplate reaches the set temperature, the pilot lamp (7) will go out, you can start ironing.
• After you finish ironing, set the temperature control knob (10) to the position «MIN». Pull the power plug out of the mains socket and let the iron cool down completely.

STEAM IRONING

Steam ironing is possible only if the temperature control knob (10) is set to the position «••», «•••» or «MAX».

The iron is provided with an anti-drip valve that stops water supply if the soleplate temperature is too low; it prevents dripping from the soleplate openings (13). During heating and cooling of the iron soleplate, you will hear characteristic clicks of the anti-drip valve opening/closing, which indicates its normal operation.

• Place the iron on its base (8).
• Insert the power plug into the mains socket.
• Make sure that there is enough water in the water tank (9).
• Turn the control knob (10) to set the required ironing temperature: «••», «•••» or «MAX», the pilot lamp (7) will light up.
• When the soleplate (13) reaches the set temperature, the pilot lamp (7) will go out, you can start ironing.
• Set the necessary steam intensity with the continuous steam supply knob (3).
• In the continuous steam supply mode, steam will be released from the openings of the soleplate (13) only if the iron is in hori-

zontal position. To stop the steam supply, put the iron vertically or set the knob (3) to the position « ».

- After you finish ironing, set the temperature control knob (10) to the «MIN» position and the continuous steam supply knob (3) to the position «✗». Pull the power plug out of the mains socket and let the iron cool down completely.

ATTENTION!

If no continuous steam supply occurs during operation, check whether the temperature control knob (10) and the steam supply knob (3) are set properly and whether there is water in the water tank (9).

BURST OF STEAM

The burst of steam function is useful when ironing of folds and can only be used at high ironing temperatures (when the temperature control knob (10) is set to «MAX» position). When the burst of steam button (4) is pressed, steam will go out of the soleplate intensively.

Note: To avoid water leakage from the steam openings, press the burst of steam button (4) with 4-5 sec. intervals.

VERTICAL STEAM

The vertical steam function can be used only at high ironing temperatures (when the temperature control knob (10) is set to the «MAX» position).

Wait till the iron soleplate heats up, hold the iron vertically at the distance of 10 to 30 cm from the clothes and press the burst of steam button (4) with intervals of 4-5 seconds, steam will be released from the soleplate openings intensively. To avoid dripping, do not perform vertical steam when the soleplate is heating up (when the pilot lamp (7) is on).

Important information

• Vertical steam is not recommended for synthetic fabrics.
• To avoid fabric melting, do not touch it with the iron soleplate while steaming.
• Never steam clothes on a person, as the steam temperature is very high, use a clothes hanger or a stand.

ENGLISH

- After you finish ironing, switch the unit off, wait until it cools down completely, then open the water inlet lid (2), turn over the iron and pour out the remaining water.

STEAM CHAMBER CLEANING

To prolong lifetime of the iron we recommend cleaning the steam chamber regularly, especially in the regions with hard tap water.

- Set the continuous steam supply knob (3) to the position « 」.

- Fill the water tank (9) till the «MAX» mark (12).

Note: Do not fill the water tank with scented liquids, vinegar, starch solution, descaling reagents, chemical agents etc.

• Place the iron on its base (8).
• Insert the power plug into the mains socket.
• Set the control knob (10) to the maximum soleplate temperature «MAX», the indicator (7) will light up.
• When the iron soleplate (13) reaches the set temperature, the pilot lamp (7) will go out. Wait until the iron soleplate is reheated, then you can start cleaning of the steam chamber.
• Unplug the unit.
• Hold the iron above a sink horizontally, press and hold the «Self Clean» button (11).
• Boiling water and steam with scale will be released from the iron soleplate (13) openings.
• Slightly swing the iron back and forth, until water goes out of the water tank (10).
• Place the iron on the base (8) and let it cool down completely.
• When the soleplate (13) cools down completely, wipe it with a dry cloth.
• Before you take the iron away for storage, make sure that there is no water in the water tank (9) and that the soleplate (13) is dry.

Cleaning and care

• Before cleaning the iron, make sure that it is unplugged and has cooled down completely.

• Clean the iron body with a slightly damp cloth and then wipe it dry.

• Scale on the iron soleplate can be removed with a cloth soaked in vinegar-water solution.
  • After removing scale, polish the soleplate surface with a dry cloth.

• Do not use abrasive substances and solvents to clean the iron soleplate and body.
• Avoid contact of the iron soleplate with sharp metal objects.

Storage

• Before you take the iron away for storage, clean it and pour out all the remaining water from the water tank (9).
• Set the temperature control knob (10) to the «MIN» position, set the continuous steam supply knob (3) to the position «∅».
  • Wind the power cord on the iron base.
• Store the iron vertically in a dry cool place, out of the reach of children.

Delivery set

Iron - 1 pc.

Beaker - 1pc.

Instruction manual - 1 pc.

Technical specifications

Power supply: 220-240 V \~ 50/60Hz

Maximal power consumption: 2600 W

The manufacturer preserves the right to change the specifications of the unit without a preliminary notification.

Unit operating life is 3 years

Guarantee

Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

This product conforms to the EMC-Requirements as laid down by the Council Directive 2004/108/EC and to the Low Voltage Regulation (2006/95/EC)

DEUTSCH

ACHTUNG!

NASTAVENÍ TEPLOTY ŽEHLENÍ

» tomonga burab qo'ying.

- Ishlatib bo'lgandan keyin haroratni o'zgartirish murvatini (10) «MIN» tomonga, doimiy bug'

berish murvatini (3) esa « » tomonga o'tkazib qo'ying.Elektr vilkasini rozetkadan chiqarib oling, dazmol sovushini kutib turing.

DIQQAT!

Dazmollayotganda bug' chiqmasa qizishini o'zgartiradigan murvati (10) bilan bug' berishini o'zgartiradigan murvati (3) to'g'ri burab qo'yilganini, suv idishida (9) suv borligini qarab ko'ring.

QO'SHIMCHA BUG' BERISH

Qo'shimcha bug' berish tugmasi buklanib qolgan joylarni tekislaganda, faqat baland dazmollash haroratida ishlatiladi (haroratni o'zgartiradigan murvati (10) «MAX» tomonda bo'lishi kerak).

A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four figures indicating the production date. For example, serial number 0606xxxxxxx means that the item was manufactured in June (the sixth month) 2006.

DE