Active ZIS2415 - Steam cleaner Zelmer - Free user manual and instructions

Product Type	Steam Station
Brand	Zelmer
Model	Active ZIS2415
Soleplate Material	Ceramic
Anti-scale Cartridge	Replaceable, recommended every 3-6 months
Steam Control	Adjustable steam selector and trigger with continuous steam lock
Temperature Control	Adjustable dial with fabric guide (dots for acetate, polyester, cotton, linen)
Vertical Steam Function	Yes, for smoothing garments and drapery
Iron Lock	Yes, for secure transport
Easy Carry Handle	Yes
Power Cord Storage	Yes
Water Tank	Removable, with MAX level indicator
Safety Features	Hot surface warning; keep out of reach of children under 8
Usage	Household use only
Warranty	2 years

Frequently Asked Questions - Active ZIS2415 Zelmer

How do I fill the water tank?

Remove the water tank from the station and fill it through the water inlet cover. Do not fill over the MAX level indicator. Make sure when placing it back that it fits correctly.

What type of water should I use?

Use tap water. If your water is hard, mix tap water with distilled water in a 2:1 ratio (tap:distilled) for hard water or 1:1 for semi-hard water. Never use 100% distilled, rain, scented, or water from other appliances like refrigerators or air conditioners.

How often should I replace the anti-scale cartridge?

Replace the anti-scale cartridge every 3-6 months, depending on usage frequency and water hardness in your region.

Why is there no steam?

Possible causes: the water tank is empty, the soleplate is not hot enough, or condensation in pipes after first use or inactivity. Fill the water tank, increase the temperature, or press the steam trigger away from clothes until steam appears.

Why are there white streaks on clothes?

White streaks indicate a build-up of scale due to an old anti-scale cartridge. Replace the anti-scale cartridge.

Why are there brown streaks on clothes?

Brown streaks are caused by using chemical descaling agents or additives in the water. Never add such products to the water tank or steam chamber.

How do I use the vertical steam function?

Hold the iron vertically and press the steam trigger to direct steam at hanging garments or drapery. For best results, use on delicate or light fabrics. Warning: Do not direct steam at people or animals.

How do I clean the ceramic soleplate?

Clean the soleplate regularly with a damp, non-metallic washing pad. Do not use abrasive cleaners, detergent, or other chemicals.

How do I transport the steam station?

Use the easy carry handle: lift it upward until it clicks into position. Before using, press and hold the handle release button and carefully lower it back to place. Ensure the iron is locked.

What do the temperature dots mean?

One dot (.) is for acetate, elastane, polyamide, polypropylene. Two dots (..) are for cupro, polyester, silk, triacetate, viscose, wool. Three dots (...) or MAX are for cotton, linen. Set the dial accordingly.

USER MANUAL Active ZIS2415 Zelmer

Exterior view of a Zelmer Active electric iron with open lid and power cord (no text or symbols on main body)

PL INSTRUKCJE UŻYTKOWANIA Stacja parowa
EN USER MANUAL Steam station
DE BENUTZERHANDBUCH Dampfstation
CZ NÁVOD K POUŽITÍ Parní stanice
SK NAVODILA ZA UPORABO Parná stanica

WE WOULD LIKE TO THANK YOU FOR CHOOSING ZELMER. WE WISH THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.

WARNING

Please read the instructions for use carefully prior to using the product. store these in a safe place for future reference.

DESCRIPTION

1. Water Inlet Cover
2. Water Tank
3. Steam selector
4. Steam Trigger
5. Temperature pilot lamp
6. Temperature Control Dial
7. Iron
8. Station
9. Iron lock
10. Interconnection Cord
11. Power Cord
12. Power cord storage
13. Anti-scale cartridge

SAFETY INSTRUCTIONS

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

If the supply cord is damaged it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

The iron must not be left unattended while it is connected to the supply mains.

The plug must be removed from the socket-outlet

before the water reservoir is filled with water.

The irons must be used and rested on a flat, stable surface

When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.

The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.

Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down.

Instruction for the safe refilling of the water reservoir are given in filling the water tank section.

CAUTION. Hot surfaces. Surfaces are liable to get hot during use.

Before connecting the appliance to the mains, put the iron in the unlocked position. To block the iron, wait until the appliance has cooled down completely and has been unplugged from the mains.

IMPORTANT WARNINGS

This appliance is designed for home use and should never be used for commercial or industrial use under any circumstances. Any incorrect use or improper handling of the product shall render the warranty null and void.

Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the product label.

If you use one adaptor, make sure it can reach 16 A and is provided with earth socket

The mains connection cable must not be tangled or wrapped around the product during use.

Do not use the device, or connect and disconnect to supply mains with the hands and / or feet wet.

Do not pull on the connection cord in order to unplug it or use it as a handle

Do not direct steam at people and animals.

Do not place the appliance under the tap to fill the water tank, or immerse it in water or other liquids.

Unplug the product immediately from the mains in the event of any breakdown or damage and contact an Official Technical support service. In order to prevent any risk of danger, do not open the device. Only qualified technical personnel from the brand's Official Technical support service may carry out repairs or procedures on the device.

Proceed according to the conservation and cleaning section of this manual for cleaning.

EN

EUROGAMA SP. Z O. O. disclaims all liability for damages that may occur to people, animals or objects, for the non-observance of these warnings.

Before the first use

Before using the Steam Station, please ensure you read the user manual and understand all parts and features of the Steam Station. Be sure to remove any packaging material and labels before using for the first time.

In the first use they can break off odors or fumes that sent quickly. Do not spray for the first time on clothes and there may be traces of dirt on the soleplate.

Water to be used

The device is designed for use with tap water. If the water in your area is hard or semi-hard use mix tap water with distilled or demineralized water purchased in stores, in the ratio 2:1 and 1:1 respectively (distilled water: tap water). Check with your water supplier to determine the type of water in your area. Never use 100% distilled or demineralized, rain water, softened water, scented water, water from other appliances such as refrigerators, air conditioners, dryers or other types of home water preparation water.

Filling the Water Tank

Remove the water tank from the station and fill it through the water inlet cover. Do NOT fill over the MAX level indicator.

Make sure when placing it back to the station that it fits correctly.

OPERATING INSTRUCTIONS

NB: If it is the first time you have steam-ironed or if the product has not been used for some time, turn the temperature control to a steam ironing position and press the steam button continuously until steam comes out. This process can take a few minutes.

Place the Steam Station on a firm level table, bench or ironing board.

Plug the unit into a power outlet and switch on at the power point.

Adjust the temperature dial in terms of choose the kind of fabrics that you want to iron.

Note: If you want to use the steam ironing, we suggest you to adjust the temperature dial on MAX.

When the iron operating light indicator goes out the device will be ready for use.

Note: During the whole operating time, the iron operating light indicator will go on and off in erratic intervals, this is normal.

To make the steam jet come out, select the steam position with the steam selector and press the steam trigger, and if you want to stop the steam release the steam trigger, in a few seconds steam will stop.

Select the steam setting by pressing and holding the steam button. The steam setting can be switched off at any time by releasing the steam button. Push the steam locker with continues steamer without pressing the steam button.

Ironing Tips

Start with the fabrics to be ironed at a low temperature and finish with those that need higher temperatures.

For mixed fibre fabric, set the ironing temperature to a lower setting.

For woollen garments, press the steam trigger repeatedly over the garment without physically touching it with the iron.

For thicker fabrics, raise the iron temperature at MAX position.

Ironing Guide Chart

Below is a guide on the temperature setting required for different types of fabric, along with the recommended iron method.

Marking Material, for example
. (1 dot) Acetate, elastane, polyamide, polypropylene
.. (2 dots) Cupro, polyester, silk, triacetate, viscose, wool
... (3 dots) / MAX Cotton, linen

Vertical Steam Ironing

This feature allows you to smooth out creases in garments or drapery in a similar manner to a garment steamer. The high steam pressure of the Steam Station can provide bursts of steam while holding the iron vertically. For best results, utilise on delicate or light fabrics. Only direct steam at hanging garments in a safe area and ensure you always refer to garment manufacturer recommendations.

WARNING: DO NOT direct the steam onto a garment that is being worn or at any person.

MAINTENANCE AND CLEANING

Iron lock

The easy carry locker attached to the base unit can be used to transport the steam Station with ease. To do so, lift it in an upward motion until it clicks into position. Before using the Steam Station, the easy carry handle must be locked back into position against the base unit; press and hold the handle release button and carefully lower it back to place.

Cleaning

Turn off the Steam Station and unplug at the power outlet.

Empty the water tank.

Regularly clean the ceramic soleplate with a damp, non-metallic washing pad.

Wipe the exterior of the Steam Station with a soft cloth.

Do NOT use abrasive cleaners, detergent or other chemicals to clean the Steam Station.

Change anti-scale cartridge

Replace the water softening cartridge regularly. At moderate use (twice a week) and depending on the water hardness in your region the water softening anti-scale cartridge should be replaced every 3-6 months.

Note: Do not use the unit without the water softening cartridge!

1. Remove the water tank from the station.

2. Pull anti-calc cartridge upwards and remove it for changing. In order to remove it, firstly unscrew it and carefully take it out. Disconnect the hose from the cartridge and connect it to the new cartridge. Screw the new cartridge back to the water tank.

Note: Be careful - there can be water inside the cartridge body.

Install a new water-softening cartridge to its place.

Troubleshooting Guide

Please consult troubleshooting table below for any issues you may face prior to contacting our support center.

Problem Possible cause Solution
Unit fails to heat up and steam. Power indicator light does not illuminate.	Unit is not plugged in. Plug into electrical outlet.
Water runs out of the holes in the soleplate.	Water has condensed in the pipes because you are using for the first time or you have not used it for some time.	Press the steam trigger away from your ironing board until the iron produces steam.
	The soleplate is not hot enough.	Wait until the iron soleplate is hot enough or increase the temperature of the soleplate.
White streaks come through the holes in the soleplate.	The product has a build-up of scale because the anti-calc cartridge has not been changed regularly.	Change the anti-calc cartridge
Brown streaks come through the holes in the soleplate and stain the linen.	You are using chemical descaling agents or additives in the water for ironing.	Never add this type of product in the water tank or in the steam chamber.
The soleplate is dirty or brown and may stain the garment. The clothe sticks in the soleplate.	You are ironing at too high a temperature.	Adjust the temperature dial to a lower heat setting.
There is no steam or there is little steam.	The water tank is empty. Fill the water tank.
	The soleplate is not hot enough.	Wait until the iron soleplate is hot enough or increase the temperature of the soleplate

ADVISE ON DISPOSAL

This product complies with European Directive 2012/19/EU on electrical and electronic devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal framework applicable in the European Union for the disposal and reuse of waste electronic and electrical devices. Do not dispose of this product in the bin, instead going to the electrical and electronic waste collection centre closest to your home.

We hope that you will be satisfied with this product.

WIR MÖCHTEN UNS BEI IHNEN BEDANKEN, DASS SIE SICH FÜR ZELMER ENTSCHIEDEN HABEN. WIR HOFFEN, DASS DAS PRODUKT ZU IHRER ZUFRIEDENHEIT UND IHREM VERGNÜGEN FUNKTIONIERT.

ACHTUNG

EUROGAMA Sp. Z o.o. guarantees compliance of this product for the use for which it is intended for a period of two years. In the case of breakdown during the term of this warranty, users are entitled to repair or else the replacement of the product at no charge if the former is unavailable, unless one of these options proves impossible to fulfill or is disproportionate. In this case, you can then opt for a reduction in price or cancellation of the sale, which must be dealt with directly with the sales vendor. This also covers replacement of spare parts provided that the product has been used according to the recommendations specified in this manual for both cases, and has not been tampered with by any third party that is not authorised by EUROGAMA Sp. Z o.o.. The warranty will not cover any parts subject to wear and tear. This warranty does not affect your rights as a consumer in accordance with the provisions in Directive 1999/44/EC for member states of the European Union.

USE OF WARRANTY

Customers must contact a EUROGAMA Sp. Z o.o. authorised Technical Service for repair of the product.

Since any tampering of the same by anyone not authorised by EUROGAMA Sp. Z o.o., or the careless or improper use of the same shall render this warranty null and void. The warranty must be fully completed and delivered along with the receipt or delivery docket for the effective exercise of rights under this warranty.

This warranty should be retained by the user as well as the invoice, receipt or the delivery docket to facilitate the exercise of these rights. For technical service and after-sales care outside the Polish territory, please submit your query to the point of sale where you purchased the item or check for further aftersales information at www.zelmer.com

GARANTIE-ERKLÄRUNG