IAN 320280 - Uncategorized Livarno Lux - Free user manual and instructions

Product Type	LED Clip Lamp
Brand	Livarno Lux
Model	IAN 320280
Power Consumption	2.5 W
Number of LEDs	9
LED Operating Voltage	8–10.2 V DC, 200 mA
Mains Adapter Input	100–240 V ~ 50/60 Hz, 0.2 A
Mains Adapter Output	11 V ===, 0.2 A
Protection Class	II (Double Insulated)
Safety Extra Low Voltage	SELV
Flexible Arm	Yes, adjustable
Clamping Base	Yes, for attachment to surfaces
On/Off Switch	Yes, integrated in cable
Indoor Use Only	Yes
LED Replaceable	No, entire unit must be replaced
Warranty	3 years
Maintenance	Clean with dry fluff-free cloth; do not use water or solvents
Safety Certification	GS certified

Frequently Asked Questions - IAN 320280 Livarno Lux

How do I attach the LED clip lamp?

Use the clamping base to attach the lamp to a suitable surface. Ensure it is not attached to tubular objects, as it may fall. Tighten the clamp firmly, but be cautious of shearing or crushing injuries.

What power source does the lamp require?

The lamp operates on 8–10.2 V DC, 200 mA supplied by the included mains adapter. Plug the adapter into a standard household outlet (100–240 V ~ 50/60 Hz).

Can I replace the LEDs if they burn out?

No, the LEDs are not replaceable. If they fail at the end of their life, the entire product must be replaced.

How should I clean the lamp?

Always unplug the mains adapter before cleaning. Use a dry, fluff-free cloth. Do not use water, solvents, or any liquids to avoid electric shock.

Is it safe to use the lamp in a bathroom or near water?

No, the lamp is designed for indoor use only in dry, enclosed rooms. Keep it away from bathtubs, showers, swimming pools, and any water sources to prevent electric shock.

What should I do if the lamp stops working?

Check the power connection and ensure the mains adapter is properly plugged in. If it still does not work, contact the service department (see warranty section). Do not attempt to repair it yourself.

How long is the warranty period?

The product comes with a 3-year warranty from the date of purchase. Keep your sales receipt as proof of purchase.

Can I use the lamp with a different mains adapter?

No, always use only the supplied mains adapter (model RSS1002-022110-W2E). Using another adapter may damage the product and void the warranty.

Why does the lamp get hot?

The lamp becomes hot during operation. This is normal. Allow it to cool before touching or adjusting the flexible arm. Do not cover the lamp while in use.

What does the GS certification mean?

GS stands for 'Geprüfte Sicherheit' (Tested Safety). It indicates that the product meets German safety requirements and has been tested for safety by an authorized body.

USER MANUAL IAN 320280 Livarno Lux

Operation and safety notes

SI

GB Operation and safety notes Page 4

List of pictograms used......Page 5

Introduction......Page 5

Intended use....Page 5

Description of parts....Page 5

Technical data......Page 6

Included items ......Page 6

Safety Page 6

Safety information......Page 6

Bringing into use......Page 8

Maintenance and cleaning......Page 9

Disposal Page 9

Warranty Page 10

Warranty claim procedure......Page 10

Service Page 11

List of pictograms used
	Short-circuit proof safety transformer		Polarity of the output terminals
	Separate control unit Safety cla
	Use indoors Direct current/volt
	Alternating current/voltage LED	pan

LED clip lamp

- Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Intendeduse

This product is intended for use indoors only, in dry and enclosed rooms. The product is not intended to be used for commercial purposes.

• Description of parts

1 Flexible lamp arm
2 Clamping base
3 Connector socket
4 DC plug
5 ON/OFF switch
6 Power cable
7 Mains adapter

- Technical data

LED clip light + Mains adapter:

Total power

consumption:2.5W

LED clip light:

Operating voltage: 8-10.2V = 200 mA

LEDs: 9 LEDs

GS certified

The LED cannot be replaced.

Mains adapter:

Rated voltage,

primary:100-240V \~ 50/60Hz, 0.2A

Rated voltage,

secondary:11V ===, 0.2A

Protection class: II / ☐

Model No.: RSS1002-022110-W2E

GS certified

SELV: Safety extra low voltage

Ta: Maximum rated am- bient temperature

Tc: Rated maximum operating temperature of the case of a controlgear

Included items

1 LED clip light

1 Mains adapter

1 Operating instructions

● Safety

Safety information

READ THESE INSTRUCTIONS BEFORE USING THE PRODUCT! PLEASE KEEP ALL SAFETY INSTRUCTIONS AND INSTRUCTIONS FOR USE FOR FUTURE REFERENCE!

WARNING! DANGER OF DEATH AND ACCIDENTS FOR

TODDLERS AND CHILDREN!

Never leave children unsupervised with the packaging material. The packaging material represents a danger of suffocation. Children frequently underestimate the dangers. Please keep children away from the product at all times.

This product is not a toy and should not be played by children. Children are not able to understand the

dangers that can occur when handling this product.

This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be made by children without supervision.

This product is designed

for use indoors only, in dry and enclosed rooms.

The product is not suitable for attaching to tubular objects. Failure to observe this advice could lead to the product falling and possible damage to the product and/or injury.

Avoid the danger of death from electric shock!

Before use, ensure that the mains voltage available is the same as the required operating voltage for the product (100-240V\~).

Before connecting the product to the mains you should always check the product and the power cable 6 for any damage. A damaged product represents the danger of death from electric shock.

- Do not use the product if you find any damage.

- Please consult a specialist electrician if you discover any damage or problems with the product, or for the performance of repairs to the product.

■ Never open any of the electrical equipment or insert any objects into it. Such interventions represent the danger of death from electric shock.

It is essential that the product does not come into contact with water or other liquids.

■ Protect the power cable 6 from sharp edges, mechanical strain and hot surfaces.

■ Never use the product in the immediate vicinity of a bathtub, shower or swimming pool.

- Do not look directly into the light or its reflection. Do not aim the light directly at people. This could produce glare, leading to accidents.

If direct or reflected light strikes your eyes, close them and move your head immediately out of the light.

• Operate the product only with supplied mains adapter. Please note that any damage caused through the use of a different adapter is excluded from the warranty.
  ■ Never touch the mains adapter 7 with moist or wet hands.
  ■ Unplug the mains adapter 7 from the socket if the product will not be used for an extended period (e.g. whilst on holiday).
  ■ The product becomes hot during operation. Allow the product to cool before you touch them.
  ■ The product is only suited for use with the included mains adapter 7.
  Please note that the mains adapter 7 continues to draw a small amount of power even if the product is turned off as long as the mains adapter 7 is plugged into a power outlet. To switch the product off completely, unplug the mains adapter 7 from the socket.
  The LEDs are not replaceable.
  If the LED fail at the end of their lives, the entire product must be replaced.

● Bringing into use

Note: Remove all packaging materials from the product.

☐ Never direct the LED light beam on to reflective surfaces or at people or animals. Failure to observe this advice may result in eye injury and / or loss of sight to people or animals. Even a weak LED light beam can cause eye damage.

☐ Attach the product in the desired position by means of the clamping base 2.

CAUTION!RISK

OF SHEARING OR CRUSHING INJURY!

A large force is required to attach the product. This could result in a risk of shearing or crushing injury through trapping parts of your body.

□ Connect the DC plug 4 to the connector socket 3.

☐ Insert the mains adapter 7 into an ordinary domestic mains outlet socket (100-240V\~).

☐ Use the ON / OFF switch 5 to switch the product on or off.

☐ Bend the flexible lamp arm 1 to bring the product into the desired position.

Note: Let the product cool down before you touch it. Do not turn the flexible lamp arm 1 completely about itself or the power cable 6 inside the product could be damaged.

● Maintenance and cleaning

Note: The product requires no maintenance. The LEDs cannot be replaced.

• Do not use any solvents, petrol or similar. This would cause damage to the product.
  ☐ Pull the mains adapter ☐ out of the mains socket.

CAUTION! DANGER OF ELECTRIC SHOCK! For electrical safety reasons do not clean the product with water or other liquids and never immerse it in water.

□ Always use a dry fluff-free cloth for cleaning the product.
☐ Never direct the LED light beam on to reflective surfaces or at people or animals. Failure to observe this advice may result in eye injury and / or loss of sight to people or animals. Even a weak LED light beam can cause eye damage.

●Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1–7: plastics/20–22: paper and fibreboard/80–98: composite materials.

The product and packaging materials are recyclable, dispose of it separately for better waste treatment. The Triman logo is valid in France only.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household

waste. Information on collection points and their opening hours can be obtained from your local authority.

- Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase.

Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

• Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

Please have the till receipt and the item number (e.g. IAN 123456_7890) available as proof of purchase.

You will find the item number on the rating plate, an engraving on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product.

If functional or other defects occur, please contact the service department listed either by telephone or by e-mail. You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till

receipt) and information about what the defect is and when it occurred.

Service

GB Service Great Britain

Tel.: [phone]

E-Mail: [e-mail]

CE

Pooblaščeni serviser:

OWIM GmbH & Co. KG

Stiftsbergstraße 1

74167 Neckarsulm

NEMČIJA