Surface Precision Smart - Scale CECOTEC - Free user manual and instructions

USER MANUAL Surface Precision Smart CECOTEC

Safety instructions 8

1. Parts and components 49
   2.Before use 49
2. Operation 49
3. Mobile App 49
4. Cleaning and maintenance 50
   6.Troubleshooting 50
5. Disposal of old electrical and electronic appliances 51
   8.Copyright 51
6. EU Declaration of Conformity 51

SOMMAIRE

EN · The coding in this manual is generic and applies to all code variants of the appliance.

Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.

• This device is designed for personal use only and is not suitable for commercial use.

• Keep the appliance and its packaging out of the reach of children and animals when unsupervised.

• Do not use the appliance if it shows visible signs of damage. In case of malfunction, contact the official Cecotec Technical Support Service.

• Keep the appliance away from electromagnetic fields (mobile phones, remote controls, etc.). Otherwise, measurement accuracy could be affected.

• Keep the appliance away from heat sources.

• Do not use the appliance outdoors.

• Do not expose the appliance to extreme temperatures, moisture, wet conditions or direct sunlight.

• Keep water and other liquids away from the appliance.

• Wide temperature variations could cause condensation. In this case, allow the appliance to go back to room temperature before use.

• Do not drop the appliance or jump on its measuring surface.

• Do not stand on the scale with wet feet and make sure the measuring surface and the surface underneath is dry.

• Do not stand on the edge of the scale.

• Do not use caustic or abrasive cleaning materials to clean the appliance, as this could damage the surface.

• This scale is intended to be used for determining body weight, analysing water, body fat, muscle and bone mass proportion in the body and calculating Body Mass Index (BMI).

• BMI function is only suitable for calculating the ideal weight of adults aged 18 and above.

• The calculated results are simple reference values. Do not use these results as the basis for any form of medical treatment or diet and contact a professional for any doubt.
• Body analysis function is not suitable for:
• People under the age of 10 or over the age of 70.
• People with a pacemaker or any other medical implant with electronic components.
• People with fever, oedema or osteoporosis symptoms.
• People undergoing dialysis treatment.
• People who are taking cardio-vascular medication.
• Pregnant women.
• The appliance can support a maximum body weight of 180 kg.

Instructions on batteries

• Keep batteries away from children and animals, they could be harmful if swallowed. In case of ingestion, seek medical assistance immediately.
• Should a battery have leaked, do not allow your skin, eyes or mucous membranes to come into contact with the battery acid.
• Warning: In case of contact with acid, rinse the affected areas with abundant fresh water immediately and contact a doctor as soon as possible.
• Make sure the battery contacts in the appliance are clean before inserting them. Clean them if necessary.
• Only use the battery type specified in the technical specifications.
• Always change all batteries at the same time and do not use

ENGLISH

cells of different types or different capacity.

• When replacing batteries, note the correct polarity (+ / -) .
• Take the batteries out of the appliance when discharged or when the appliance is not going to be used for a long time.
• Batteries should not be recharged or reactivated, dismantled, thrown into fire, immersed in fluids, or short-circuited.
• This appliance uses 2 × 1.5V batteries, AAA type (included).
• Warning: If "Lo" appears on the display, batteries need to be replaced.
• Replacing the batteries:
• Open battery compartment at the bottom of the appliance.
• Remove used batteries.
• Introduce 2 × 1.5 -volt batteries, AAA type. Pay attention to polarity.

INSTRUCTIONS DE SECURITE

-4.1ai
[ - {g}^{j}{\varepsilon }^{1}{g}^{j}\therefore ]

-(-/+）
-0j

.

a1 = 2,an + 1 = 2( a_n + 1)

• 1
  - ( ^ ^ _i)

. 10

1

jll jll l 1

aaiiiaai i jiljlll jil

Aabll 1,0 AAA

ESPANOL

1. PIEZAS Y COMPONENTES

Fig.1

https://cecotec.es/es/information/declaration-of-conformity

1. PARTS AND COMPONENTS

Fig. 1

1. Display
2. Tempered glass platform
3. Battery compartment cover
4. Weight unit selection button

2. BEFORE USE

• Take the appliance out of the box. Check carefully if there is any damage, and if there is, immediately notify the Technical Support Service of Cecotec.
• Select the desired unit of measurement by pressing the weight unit change button (kg, lb or st:lb).

Box content:

• 2 x 1.5V AAA batteries
• Surface Precision Smart
• Instruction manual

3. OPERATION

• Place the device on a solid, dry and level surface (avoid carpets). Uneven floors will result in inaccurate measurements.
• Step onto the scale carefully. The display will automatically turn on and show your weight. The display will lock and flash to indicate the final weight reading. The device will automatically turn off after several seconds of inactivity.
• To ensure accurate operation, remember to take off your shoes and socks before stepping onto the scale.
• Step onto the scale, place your feet on the contact sensors and remain still.
• Do not step off the scale until the results appear on the display.

4. MOBILE APP

APP installation

• Search for the «Cecotec Fit+» APP in your device's app store to download and install it, or scan the QR code directly to open it in your browser.
• The QR codes for downloading the App are shown below.

ENGLISH

Figure.2

1. Enable Bluetooth on your mobile phone and open the «Cecotec Fit+» App to access the interface; first-time users must accept the user agreement before proceeding.
2. Before connecting and using, please step lightly on the scale to illuminate the display and ensure both Bluetooth and GPS location services are enabled.
3. Launch the APP, access the homepage and sign in/register. For first-time use, please set the correct personal parameters for the current user.
4. After entering the App interface, click [My]–[Device Management] and verify if the device has been paired.
5. User switch: You can switch between users by clicking the arrow next to the avatar in the top-left corner of the control panel page.
6. Weighing methods: Step directly onto the scale. Follow the scale's instructions and wait for the indicator detection to complete. You can then view the relevant data information on the scale.
7. Click (+) and the «paired device» within the application. Please note that this method requires illuminating the scale's surface to obtain connection status. Please stand firmly until the indicator measurement is complete. After completion, the interface will automatically switch to measurement results; click on specific indicators to view detailed data and recommendations.

5. CLEANING AND MAINTENANCE

• Never immerse the device in water or other liquids. Do not allow any liquid to enter the device during cleaning.
• Never use caustic or abrasive cleaning agents to clean the device, as these may damage the surface.
• Use a soft, damp cloth to clean the scale; if necessary, use a mild cleaning agent.
• When not in use, store the device in a clean, dry place, protected from direct sunlight and out of the reach of children.

6. TROUBLESHOOTING

Battery indicator light: Low battery (Batteries need replacing)

Err: Err: Self-calibration incomplete (Weigh again after display shows 0.0

OL:Overload

Lo: Replace batteries

7. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or battery must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the batteries/accumulators and take them to a collection point designated by the local authorities.

For detailed information on how to properly dispose of electrical and electronic equipment and/or the corresponding batteries, consumers should contact their local authorities.

Compliance with the above guidelines will help to protect the environment.

8. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The content of this publication may not, either in part or in its entirety, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without prior authorisation from CECOTEC INNOVACIONES, S.L.

9. EU DECLARATION OF CONFORMITY

Cecotec Innovations hereby declares that this Surface Precision Smart, model EU01_116268 is in conformity with the Radio Equipment Directive 2014/53/EU.

The full text of the EU Declaration of Conformity can be found on the following website:

https://cecotec.es/es/information/declaration-of-conformity

FRANÇAIS

1. PIECES ET COMPOSANTS

Img.1

https://storecotec.de/de/information/declaration-of-conformity

ITALIANO

1. PARTI E COMPONENTI

Fig.1

https://storececotec.it/it/information/declaration-of-conformity

1. PEÇAS E COMPONENTES

Fig. 1

https://cecotec.pt/pt/information/declaration-of-conformity

NEDERLANDS

1. ONDERDELEN EN COMPONENTEN

Afbeelding 1

6. PROBLEEMOPLOSSING

https://cecotec.es/es/information/declaration-of-conformity

1. PARÇALAR VE BILEŞENLER

Sekil 1

https://cecotec.es/es/information/declaration-of-conformity

1. PECESI COMPONENTS

Fig.1

https://cecotec.es/ca/information/declaration-of-conformity

MAGYAR

https://cecotec.es/es/information/declaration-of-conformity

1

1

1.

i 2

3

4.

1.2

1

（st:lbj

:gi#di#i ci#

-aaa AAA 1.5

-Surface Pre

-1

3

-à7
i 1
aiee
S木弟形 COBD = S COD + S_ BDO
一
-aiililil 1

Jgaaal 4

aiaia aaiia jiaia aaiiayaiy jao yaae gaiy iaiy, ciaybll jiao "aaiill"gaii jjiip

QRR

2

1

a a

gall gll gll l 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2

.GPS

E

1 3

aannnnnnae

jai 10

a j 150

Jilll lalil g jyall g jllg jll 1jll 1jll 1jll 1jll 1jll 1jll

J 1

1. 1.2.3.4.5.6.7.8.9.10.11.12.13.14.15.16.17.18.19.20.21.22.23.24.25.26.27.28.29.30.31.32.33.34.35.36.37.38.39.40.41.42.43.44.45.46.47.48.49.50.51.52.53.54.55.56.57.58.59.60.61.62.63.64.65.66.67.68.69.70.71.72.73.74.75.76.77.78.79.80.81.82.83.84.85.86.87.88.89.90

aallll llll llll llll llll llll llll llll llll llll

J 1

aiyolg 5

jgljglj

1 2

-

- A_1D2 以 D 为圆心的圆弧

6

（）

(“0.0”aaiilie 1y jyj yj yj yj yj yj yj yj yj yj yj

ol.

Lo: 1j

a jai 7

y

J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J

.CECOTEC INNOVACIONES,SL

19

Surface Precision Smart Cecotec Innovaciones

JU2014/53 1626

ailll g y jy 11g aal g c tia g yjy 21 11 11

https://cecotec.es/es/information/declaration-of-conformity

Fig./Img./Abb./Afb./Rys.1

Fig./Img./Abb./Afb./Rys.2

www.ceotec.es