Clima ML - Heating EWT - Free user manual and instructions

USER MANUAL Clima ML EWT

EN | As with all portable heating appliances. This product is suitable only for well insulated spaces or occasional use.

The product complies with all the required European product safety, Electromagnetic compatibility and environmental standards. It is fully compliant with the LVD, EMC, RoHS and Eco design directives.

Glen Dimplex. All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Glen Dimplex.

EXCLUSIONS DE GARANTIE

• WARNING: To avoid danger of suffocation please remove all packaging materials particularly plastic and EPS and keep these away from vulnerable people, children and babies.
• WARNING: To avoid the risk of accidental strangulation from the supply cord all children and vulnerable people must be supervised when in the vicinity of the product whether it is working or not.
• DO NOT pull, carry or move the appliance using the power cable.
• WARNING: Risk of fire - Do not use this appliance connected through an extension lead or any external switching device such as a plug in timer or remote control plug in adaptor. All heating appliances draw high current through the mains supply and any weakness in the design, connections or components in these devices can easily result in overheating of the connection points resulting in melting, distortion and even the risk of fire.
• The socket-outlet must accessible at all times to enable the mains plug to be disconnected as quickly as possible.
• DO NOT operate the appliance with the mains lead overhanging the fins.
  DO NOT COVER or obstruct the air

inlet and outlet grill in any way.

• DO NOT use the heater on deep pile carpets or the long hair type of rugs, or less than 750mm (30") away from any overhanging surface. Keep combustible materials such as drapes and other furnishings clear from the front, sides and rear of the heater. Do not use heater to dry your laundry.
• This instruction leaflet belongs to the appliance and must be kept in a safe place. If changing owners, the leaflet must be surrendered to the new owner.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• If the supply cord is damaged, it must be replaced by a qualified person in order to avoid a hazard.
• CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must

not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

This heater carries the warning symbol indicating that it must not be covered.
- WARNING: In order to avoid overheating, do not cover the heater.
DO NOT place the heater directly below a fixed socket outlet.
Children of less than 3 years should be kept away unless continuously supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
- CAUTION: Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
DO NOT use this heater in the immediate surroundings of a bath, a shower or a swimming pool.

DO NOT use this heater if it has been dropped.
- DO NOT use if there are visible signs of damage to the heater.
- Use this heater on a horizontal and stable surface with the feet securely fitted.
- WARNING: Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
- WARNING: To reduce the risk of fire, keep textiles, curtains or any other flammable material a minimum distance of 1m from the air outlet.
- IMPORTANT: The feet supplied with the appliance must be used.
- DO ENSURE that the mains lead cannot be tripped over.
- If the product is tipped over, unplug it and allow it to cool before standing it back up.

TECHNICAL DATA

Model Clima ML Clima ML Turbo

Specification

Electromechanical Thermostat Yes Yes

Heat selection Switch Yes Yes

Power indicating Neon No Yes

Turbo Fan No Yes

Feet for portable use Yes Yes

Wall mountable

No No

Heat output

Nominal heat output	Pnom	2.0	2.0	kW
Minimum heat output (indicative)	Pmin	1.2	1.2	kW
Maximum continuous heat output	Pmax,c	2.0	2.0	kW

Auxiliary electricity Consumption

At nominal heat output	elmax	0.0	0.0	kW
At minimum heat output	elmin	0.0	0.0	kW
In standby mode	eSB	0.0	0.0	kW

Type of heat output/ room temperature control

With mechanical thermostat room temperature control	Yes Yes
Contact details	GLEN DIMPLEX FRANCEImmeuble Maille Nord III12 boulevard du Mont d'Est93160 NOISY-LE-GRANDFrance

ELECTRICAL

WARNING - THIS APPLIANCE MUST BE EARTHED

This heater must be used on an A.C. ~ supply only and the voltage marked on the heater must correspond to the supply voltage.

POSITIONING THE HEATER

Always ensure that the heater is stood on a firm, level base near to, but not directly underneath a suitable mains supply socket.

Ensure that curtains and furniture are not positioned close to the chosen position.

WARNING: Please ensure the minimum clearance dimensions indicated in Fig.1 are maintained.

ASSEMBLY

WARNING: The heater must only be operated with the feet securely fitted and in the upright position.

Never use the heater as a portable appliance without the feet securely fitted using the screws provided.

To assemble, lay the heater on its back and remove the two foot fixing screws see Fig.2. Assemble the feet by pressing them firmly into the convector body as indicated in Fig.2, the foot should clip into position.

Secure using the foot fixing screw, Return the heater to the upright position,

The appliance is now ready for use.

USING THE HEATER

IMPORTANT - OBJECTS OR CLOTHING MUST NOT BE PLACED ON THIS HEATER.

Before using the heater ensure that all warnings and instructions have been carefully read. To activate the heater, after installation or assembly, simply plug it in.

Note: The element has been coated with a protective film which will burn off during the first few minutes of use, this may cause a small amount of fuming. This is quite normal - the fumes are non-toxic and will quickly disappear.

We recommend that you open a window to ventilate the room when using the heater for the first time.

CONTROLS

All models are fitted with a heat selection switch and a thermostat control knob, see Fig 3. The Clima ML Turbo model has a mains power indicating Neon lens and a boost fan.

Thermostat

The thermostat controls the heat output according to the room temperature.
This ensures that the heater will not produce heat unnecessarily when the room is warm.
To set the temperature you require, gradually turn the thermostat knob clockwise until the desired temperature is reached.
Allow some time between increments for the room temperature to stabilise.
Alternatively to heat a cold room quickly, turn the thermostat knob to the Max position. When the room has reached the desired temperature, turn the thermostat knob anticlockwise until the thermostat clicks off. The heater will then automatically maintain this room temperature.

The thermostat also has a frost protection setting marked 'This setting is useful in areas such as garages to prevent frost damage. If the thermostat is set to its minimum setting', the heater will cycle ON and OFF to maintain a temperature of approximately 5^ to help protect against frosty conditions.

Heat selection switch

Depending on the model the options available on the control knob may vary, see Fig.4. The following table explains the operation of each knob position.

Mode Operation

0

Off

1

Low heat

1

High heat

High heat with turbo fan

SAFETY FEATURES

This appliance incorporates a number of safety devices.

In addition to the 'Important Safety Advice' section your attention is drawn to the following:

Safety Overheat Protection

The heater is fitted with a thermal cutout which will switch off the heater should it overheat for any reason. If the thermal cutout operates, unplug the unit immediately. Allow the heater to cool down completely and remove the cause of the over heating.

Reconnect the power - normal operation should be resumed.

Tilt switch

The product is fitted with a safety tilt switch which will prevent the heater from working if the heater is accidentally tipped over in any direction.

If the heater is tipped over while it is hot, disconnect the power and allow it to cool, then stand the heater back upright.

Reconnect the power - normal operation should be resumed.

Note: The tilt switch mechanism makes a muted rattling noise when the product is moved or tilted, this is not a fault, this noise is normal.

ADDITIONAL

Turbo fan (Selected models)

The turbo fan is used to boost the airflow around the room.

This circulates the heat better and results in a reduced heat up time and a more even heat distribution.

The turbo fan is turned On and Off using the Control knob.

Important Notes

Although this heater is manufactured to comply with the relevant safety standards, certain types of carpets could become discoloured by the temperatures under a portable heater. If you are concerned about this, we recommend that you contact the carpet manufacturer for guidance.

Alternatively, stand the heater on a suitable base to shield the carpet - call our Helpline for further advice.

You may notice some parts of the element appearing to be hotter from time to time because of the variable airflow through the heater.

This does not cause a safety hazard.

The heat outlet grille may become discoloured with use - this is caused by airborne pollution and is not a fault.

Storage

If the heater is not required for long periods, for example during the summer, it should be stored in a dry place and preferably covered to prevent the accumulation of dirt and dust.

Cleaning

WARNING - ALWAYS DISCONNECT THE POWER SUPPLY BEFORE CLEANING THE HEATER.

Do not use detergents, abrasive cleaning powder or polish of any kind on the body of the heater.

Allow the heater to cool, then wipe with a dry cloth to remove dust and a damp cloth (not wet) to clean off stains. Be careful not to allow moisture in to the heater.

WARRANTY

This EWT® appliance comes with a two- (2) year warranty which begins on the date of purchase and only applies to use under normal conditions. The warranty does not apply to damage incurred as a direct or indirect result of inappropriate use, negligence, improper use, accidents, improper repairs or lack of maintenance. Please keep your receipt/invoice as proof of purchase.

The accessories which come with this are consumables and the warranty pertaining to them is limited to one (1) month.

EXCLUSIONS FROM WARRANTY

• Modifications, disassembly or integration into another machine or assembly making the appliance fixed or semi-fixed,
  Normal wear and tear of parts,
• Deterioration following incorrect use,
• Failure to respect the instructions manual or the maintenance and safety instructions,
• Damage arising from faulty maintenance or lack of maintenance,
• Damage caused by exterior factors (lightning...),
  Abnormal use of the machine,
• Storage in poor/inappropriate conditions,
  Impacts,
• Immersion of the appliance
• Use of parts or accessories which are not approved and certified by Glen Dimplex Consumer Appliance,
• Expiry of warranty.

RECYCLING

In compliance with European Directive 2012/19/EU regarding electrical and electronic equipment (WEEE), this equipment is marked with the crossed-out dustbin symbol which indicates that the product should not be disposed of with household waste.

It should be delivered to an appropriate collection point for processing, valuation, recycling of EEE waste (obtain information from your local town or city hall) or returned to a distributor on a "1 for 1 free" basis (recovery by the distributor does not entitle you to any payment or discount).

By taking this action in favour of the environment, you, as a consumer or user, will be making a contribution to the preservation of natural resources and the protection of human health.

VEILIGHEIDSINSTRUCTIES

WAARSCHUWING -DIT APPARAAT MOET GEAARD WORDEN

INFORMACJE DODATKOWE

Turbo wentylator (Wybrane modele)

Consumer Appliances Europe

Saturnus 8 - NL-8448 CC Heerenveen

PO Box 219 - NL-8440 AE Heerenveen

T. [phone]

F. [phone]

GDHV

Dunleer, Co. Louth

Ireland

www.ewt.eu