Full Magma Double - Cooker CECOTEC - Free user manual and instructions

USER MANUAL Full Magma Double CECOTEC

Exterior view of a modern incandescent cooktop appliance with two circular burners and a digital display (no text or symbols visible on the device itself)

Safety instructions 8

1. Parts and components 47

2. Before use 47

3. Operation 47

4. Cleaning and maintenance 49

5. Troubleshooting 50

6. Technical specifications 51

7. Disposal of old electrical and electronic appliances 52

8. Technical support and warranty 52

9. Copyright 53

SOMMAIRE

Before using the appliance, read the following instructions carefully. Keep this instruction manual for future reference or new users.

• It is your responsibility to make sure every user is informed about the warnings and precautions stated in this instruction manual.
• This device is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.
• The appliance is not intended to be operated by means of an external timer or a separate remote-control system.
• This appliance can be used by children aged 8 years old and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance should not be carried out by children unless they are over 8 years old and are under supervision.
• Keep this appliance and its power cable out of reach of children under the age of 8.
• WARNING: if the surface breaks, turn off the device to avoid electric shock. Please handle the induction plate with care to avoid damages. Do not use the appliance and contact the Technical Support Service of Cecotec.
• Metallic objects like knives, forks and spoons should not be placed on the induction hobs, as they may heat up.

• This symbol means "caution, hot surface". The surface is susceptible to heat during use. Be careful.

• If the power cable is damaged, it must be replaced by the Technical Support Service of Cecotec or similar qualified personnel to avoid risks.

• Never immerse the appliance or its power cord in water or any other liquid.
• Any intervention, other than normal cleaning and maintenance, must be performed by the official Technical Support Service of Cecotec.
• People with cardiac pacemakers or similar medical devices should be kept away from the induction hob when it is connected to the power supply. If in any doubt, consult a medical practitioner before using this product to avoid any danger.
• This appliance is designed for indoor domestic use only. In case of professional use, inappropriate use, or failure to comply with these instructions, the manufacturer accepts no responsibility, and the warranty will not apply.
• Before using it for the first time, check that your mains supply voltage matches the one indicated on the appliance data plate. Any connection error will invalidate your warranty.
• The appliance must be connected to a socket outlet with an earth contact. Do not use a socket adapter or connect any other appliance into the same socket simultaneously, to avoid electrical overloading and risk of fire.
• Given the diverse standards in effect, if the appliance is used in a country other than that in which it is purchased, have it checked by an approved service centre.
• Remove all packaging materials, stickers, and accessories from the inside and outside of the appliance.

• The appliance must be placed and used on a flat, stable, heat-resistant work surface, away from water splashes.

• Do not place or use this appliance in high humidity environments.

• Do not place or use the induction plate on steel or aluminium surfaces.
• Maintain a gap of at least 10 cm (4 inches) on all sides of the appliance to ensure adequate ventilation.
• Never place or use the appliance close to a wall or below a wall cupboard.
• Never place or use the appliance below or close to easily inflammable objects (e.g., curtains, etc.).
• Never place or use the appliance on or close to a portable stove or other sources of heat.
• Unwind the power cord fully before use.
• Do not use an extension lead. Never leave the product, even for a few moments, while it is connected to the mains, especially if children are present.
• Do not let the power cord hang where children may reach it.
• The power cord must never be close to or in contact with hot parts of the appliance, close to sources of heat, or resting on sharp edges.
• Take all necessary precautions to prevent anyone from tripping over an extension cord.
• Switch off and disconnect the appliance from the power supply when not in use.
• Never disconnect the plug by pulling from the power cord.
• Inspect the appliance and power cord for signs of wear or damage before connecting it to the power supply.
• Never move the appliance when it is hot.
• Allow the appliance to cool down completely before you clean and store it.

• Always keep the induction hob clean to avoid dust from entering the fan motor and causing a malfunction.

• Should any part of the appliance catch fire, never try to extinguish the flames with water.

• Disconnect the appliance and smother the flames with a damp cloth.
• Place the pan at the centre of the cooking circle.
• Do not overheat an empty pan or pot during long periods of time.
• Do not heat the food in cans or other airtight containers to avoid explosions caused by air expansion.

INSTRUCTIONS DE SÉCURITÉ

The graphics in this manual are schematic representations and may not exactly match the appliance.

2. BEFORE USE

• This appliance is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the device when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions. If there is any piece missing or not in good condition, immediately contact the official Cecotec Technical Support Service.

Box content

• Full Magma Double induction hob
• Instruction manual

3. OPERATION

Temperature/power settings

Levels per power settings:

Power, left cooking zone (W)	200 4	00 600	800 10	000 120	00 1400	1600 180	00 2000
Power, right cooking zone (W)	200 4	00 600	800 10	000 1200	1300	1500

Levels per temperature settings:

Temperature, left cooking zone (°C)	60 80	100 120	140 160	180 200	220 240
Temperature, right cooking zone (°C)	60 80	100 120	140 160	180 200	220 240

Control panel for both induction hobs Fig. 2.

1. Function
2. Timer
3. Decrease icon
4. Increase icon
5. Child Lock
6. On/Off

Switch-on

Plug in the AC cord, the hob will beep and the indicators and display will flash for 1 second. The display will show "C" and the induction hob will switch on.

On/Off touch icon

1. When the hob is connected to the power supply, press the On/Off touch icon; the display will light up and show "ON". The hob will enter Standby mode.
2. In Standby mode, the hob will stop operating if no function is selected within 30 seconds.

Function touch icon

1. Press the Function touch icon to select temperature or power.
2. After selecting the function, you can press the Increase (+) or Decrease (−) touch icons to adjust the temperature or power.

Increase (+) / Decrease (-) touch icons:

1. Both touch icons are used to adjust the temperature level. The left cooking zone has 10 power levels from 200 W to 2000 W, and the right cooking zone has 8 power levels from 200 W to 1500 W. The temperature can be set from 60°C to 240 °C.
2. The touch icons are also used to set the time in the timer function.

Timer touch icon

1. Press the Timer touch icon to set the timer (from 1 minute to 4 hours).
2. Press the Increase (+) or Decrease (-) icon to adjust the operating time. Briefly press +/- to control the timer in 1-minute intervals, and press and hold +/- to control the timer in 10-minute intervals.

Lock touch icon

1. At any time, press the Lock touch icon to lock the induction hob. Disconnect the plug from the socket and wait until the induction hob has cooled down.
2. If you press the Lock touch icon for 3 seconds, the induction hob will unlock and maintain the same status as before.

How to choose the right cookware for induction cooking

• Use only cookware with a suitable base for induction hobs. Look for the induction symbol on the packaging or on the bottom of the cookware.
• Cookware made of the following materials is incompatible: pure stainless steel, aluminium or copper without magnetic base, glass, wood, porcelain, ceramic and earthenware.
• Do not use cookware with serrated edges or with a curved base.
• Make sure the base of the cookware is smooth, flat against the glass, and of same size as the cooking zone. Always centre the cookware in the cooking area. The diameter cannot be less than 12 cm to ensure that the energy field has an effect. Do not use cookware with a diameter greater than 26 cm.
• Always lift the cookware off the induction hob, do not slide it, as it could scratch the glass.
• You can check if your cookware is suitable with a magnet test. Move a magnet towards the cookware base. If it sticks or is attracted by the utensil, this means that the utensil is compatible with the induction hob.

If you do not have a magnet

1. Pour some water into the utensil to be tested.
2. Switch on the hob and wait no more than 3 minutes to see if the water heats up.

4. CLEANING AND MAINTENANCE

1. Clean the induction hob after each use.
2. Unplug and wait until the induction hob has cooled down before cleaning.
3. If the surface becomes dirty, wipe it with a damp cloth.
4. Keep the induction hob clean; prevent insects from entering to keep the unit in good working order.

ENGLISH

1. Clean the ventilation grilles with a toothbrush or cotton swab to ensure that the air outlet is clear.
2. The induction hob should only be repaired by professionals.
3. Never use metallic cloths or abrasive detergents to clean the hob, as this may cause it to deteriorate and stop working properly.

5. TROUBLESHOOTING

Error codes

When the induction hob stops working, it displays an error code referring to a specific problem. In the following table you can find all codes, as well as their causes and solutions:

Error code Cause	Solutions
E0	Absent or incompatible cookware	Place a suitable cooking utensil on the induction hob.
E1	IGBT sensor open circuit / short circuit	Please, have it repaired by a technician.
E2 Internal over heating		First detect whether the air outlet is blocked or not, and check if the induction hob works properly again after cooling down. If it is still not working properly, please have it repaired by a technician.
E3, E4	270 V overvoltage90 V undervoltage	Check and make sure that the appliance is connected to a correctly installed socket with 220-240 V ~ 50/60 Hz.
E5	Top hob sensor open / short circuit	Please, have it repaired by a technician.
E6 Surface overheating		Disconnect the plug from the socket and wait until the appliance has cooled down. If the problem persists, contact the Technical Support Service of Cecotec and specify the error code.

Troubleshooting:

ERROR CHECK
1. There is no beep when the hob is plugged in, or no reaction or display when pressing the power button.	Check if plug is damaged.
	Check if power is cut off.
2. Hob turns off after warning with continuous beeps.	Check if the pan is compatible with the magnetic induction system.
	Check whether the pan is centered on the cooking surface.
	Check if the pan is over the stated diameter.
3. The temperature cannot be adjusted. There	may be some kind of hardware or software problem with the device. Please contact Cecotec Technical Support.

6. TECHNICAL SPECIFICATIONS

Product reference: 02663

Product: Full Magma Double Induction Hob

Voltage: 220 - 240 V\~

Frequency: 50 - 60 Hz

Power: 3500 W (split into 2000 W and 1500 W)

Technical specifications may change without prior notification to improve product quality.

Made in China | Designed in Spain

	Symbol Value Unit
Model identification 02658
Type of cooking hob Induction hob
Number of cooking zones 2 -
Heating technology (induction hotplates and cooking zones, radiation hotplates, solid hotplates)	Induction cooking
	Symbol Value Unit
For circular cooking spots or cooking zones: diameter of the usable area of each electric cooking spot, rounded to the nearest 5 mm	∅ 21 - 21 cm
For non-circular lamps or cooking zones: width and length of the usable surface of each lamp or electric cooking zone, rounded to the nearest 5 mm	LW	--	cm
Energy consumption per lamp or cooking zone, calculated per kg (*)	Electric cooking	189.2 / 187.6	Wh/kg
Energy consumption of the hob, calculated per kg (*) Electric	hob	188.4 Wh/kg

7. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

Compliance with the above guidelines will help protecting the environment.

8. TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.

It is recommended that repairs be carried out by qualified personnel.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at [phone].

9. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

FRANÇAIS

1. PIÈCES ET COMPOSANTS

Img.1

5. PROBLEEMOPLOSSING

Foutcodes