YB06-11 - Car part Vevor - Free user manual and instructions
Find the device manual for free YB06-11 Vevor in PDF.
| Product Type | Catalytic Converter |
| Brand | Vevor |
| Model | YB06-11 |
| Body Material | Stainless Steel |
| Substrate Material | Ceramic (honeycomb) with precious metal catalysts (Pt, Rh, Pd) |
| Emission Standard | Compliant OBD III (not CARB compatible, not legal in California) |
| Main Functions | Exhaust gas purification (conversion of CO, HC, NOx into CO2, H2O, N2) and improved exhaust flow |
| Vehicle Compatibility | Subaru Forester, Impreza, Outback H4 2.5L (2005-2010, except Turbo models); Saab 9-2X front H4 2.5L (2006, except Turbo models) |
| Supplied Parts | 1 catalytic converter, 2 sealing gaskets (shipping rings?), 1 nut, 1 spacer |
| Installation | Standard flange installation; professional installation recommended |
| Normal Phenomena After Installation | White smoke for about 30 minutes (evaporation of anti-rust oil); burning smell for about 50 km (combustion of insulating tape) |
| Usage Restrictions | Prohibited for vehicles registered in California (CARB standards) |
| Maintenance and Cleaning | No specific maintenance required; check joint tightness periodically |
| Safety | Do not touch during or after operation (high temperatures); have installation done by a professional |
| Spare Parts and Repairability | The product is not designed to be repaired; replace the entire unit in case of failure |
| General Information | Technical support and warranty via www.vevor.com/support |
Frequently Asked Questions - YB06-11 Vevor
User questions about YB06-11 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Car part in PDF format for free! Find your manual YB06-11 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. YB06-11 by Vevor.
USER MANUAL YB06-11 Vevor
Technical Support and E-Warranty Certificate www.vevor.com/support
CATALYTIC CONVERTER
MODEL: YB06-11
We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when you are placing an order with us that you are actually saving half in comparison with the top major brands.
VEVOR®
TOUGH TOOLS, HALF PRICE
CATALYTIC
CONVERTER
MODEL: YB06-11
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
Technical Support and E-Warranty Certificate www.vevor.com/support
This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.
WARNING:
After receiving our product, you need to find a repair shop to put the car on a shelf, then remove the old catalytic converter, install the new catalytic converter in its original position, and install the gasket and washer, tighten the screws! You can now drive and use it normally!
After installing the catalyst, the following two situations will occur, both of which are normal phenomena!
Firstly, the surface of the catalytic converter is coated with rust-proof oil. After the car starts and the catalytic converter reaches high temperature, the rust-proof oil on the surface will evaporate due to heat, and white smoke will emerge. After 30 minutes of use, it will disappear on its own. This is a normal phenomenon, please do not worry!
Secondly, after the installation of the new catalyst, when the car starts, a burnt odor will be emitted from the exhaust gas. This is because the ceramic carrier part of the catalyst's internal structure is wrapped in a fireproof cotton with transparent tape, also known as an insulation cotton pad. It wraps around the ceramic carrier, and the transparent gelatin belt will burn when exposed to high temperatures. At this time, the exhaust pipe will discharge this odor, so you smell a burnt odor! It will disappear on its own after using about 50 kilometers; this is a normal phenomenon! Don't worry!
Friendly Note: This part cannot be used for California-registered vehicles. (Due to the increased emissions standards, this converter is NOT legal for use in CA.)
SAVE THESE INSTRUCTIONS
PRODUCT PARAMETERS
| Model | YB06-11 |
| Body Material | Stainless Steel |
| Substrate Material | Ceramic |
| Standard | OBD IV Compliant, no compatible con CARB |
| Restricted States | California |
| Vehicle Fitment | 2006 applicable for Saab 9-2X front H4 2.5L (excl Turbo models)2005-2010 Subaru Forester H4 2.5L engine (exclud Turbo models)2005-2010 Subaru Impreza H4 2.5L engine (exclud California emission model)2005-2010 applicable to Subaru's traditional H4 2.5L engine (excluding Turbo models)2005-2010 applicable to Subaru H4 Outback 2.5L e (excluding Turbo models) |
PART LIST
When unpacking this product, check to make sure the parts listed below are included and carefully inspect for any damage that may have occurred during transit. If any part is missing or damaged, do not attempt to assemble or use the product.
| NO | PICTURE | NAME | QTY | NO | PICTURE | NAME | QTY | |
| 1 |  | Catalytic converter | 1 | 2 |  | Gasket | 3 | |
| 3 |  | Carrier Ring | 2 | 4 |  | Nut | 15 | |
| 5 |  | Shim | 1 | |||||
INTERNAL HONEYCOMB STRUCTURE
OEM High Flow Design: This catalytic converter is constructed to meet or even exceed OEM quality. Its high flow design provides more oxygen to your engine, dramatically improving your exhaust system. Further, an internal honeycomb structure effectively purifies the waste gases, converting CO, HC, and NOx into CO2, H2O, and N2.
VEVOR
Bigger Hole
Higher Flow Rate
Longer Service Life
Other Converter
Small Hole
Low Flow Rate
Easy to be Blocked
Stainless Steel Structure: The high flow catalytic converter is assembled with a stainless steel body for long-term use, capable of enduring high-temperature gases from the exhaust. Its internal ceramic substrates contain high-load precious metal catalysts, including Pt, Rh, and Pd, to enhance purification efficiency and intensity.
STAINLESS STEEL STRUCTURE
Heavy-duty construction for maximum durability
Firmly Welded Connections
No Oxide Scale Falling
Internal Ceramic Substrates
Hassle-Free Installation: Our free-flow catalytic converter has standard specification flanges designed for easy installation. Direct bolts exist in exhaust system without extra modification. The kit also comes with gaskets and hardware for replacement. Professional installation is highly recommended for exerting its max capability.
Standard OBD III Compliant: This high flow converter complies with O
Standard OBD II Compliant: This high flow converter complies with OBD II Standards, ensuring the exhaust emissions meet the Federal Emission Standards. However, it is illegal to be used in California as the NON compliant. With this high-quality converter, you have no worry about M code issues in your driving.
FOR Nissan/Suzuki Equator
Impreza/Legacy/Back H4 2.5L 2005-2010 and Saab 9-2x Front H4 2.5L 2006. Measure the input and output diameters of the original converter to ensure that the product is suitable for your vehicle.
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREET, EASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
| EC | REP |
E-CrossStu GmbH
Mainzer Landstr. 69, 60329 Frankfurt am Main
| UK | REP |
YH CONSULTING LIMITED.
C/O YH Consulting Limited Office 147, Centurion House
London Road. Staines-upon-Thames. Surrey. TW18 4
VEVOR®
TOUGH TOOLS, HALF PRICE
Technical Support and E-Warranty Certificate
www.vevor.com/support
VEVOR®
TOUGH TOOLS, HALF PRICE
NEED HELP? CONTACT US!
PRODUCT PARAMETERS
Other Converter
Small Hole
Low Flow Rate
Easy to be Blocked
STAINLESS STEEL STRUCTURE
Heavy-duty construction for maximum durability
Firmly Welded Connections
No Oxide Scale Falling
Internal Ceramic Substrates
Lieu, Rancho Cucamonga, CA 91730
E-CrossStu GmbH
C/O YH Consulting Limited Bureau 147, Centurion House,
Route de Londres, Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
Other Converter
Small Hole
Low Flow Rate
Easy to be Blocked
C/O YH Consulting Limited Office 147, Centurion House,
London Road, Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
www.vevor.com/support
VEVOR®
TOUGH TOOLS, HALF PRICE
Other Converter
Small Hole
Low Flow Rate
Easy to be Blocked
Imported into AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD
New South Wales 2122 Australia
electronics www.vevor.com/support
VEVOR®
TOUGH TOOLS, HALF PRICE
Other Converter
Small Hole
Low Flow Rate
Easy to be Blocked
STAINLESS STEEL STRUCTURE
Heavy-duty construction for maximum durability
Firmly Welded Connections
No Oxide Scale Falling
Internal Ceramic Substrates
C/O YH Consulting Limited Oficina 147, Centurion House,
Carretera de Londres, Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
NEED HELP? CONTACT US!
Other Converter
Small Hole
Low Flow Rate
Easy to be Blocked
FOR Nissan/Suzuki Equator
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
NEED HELP? CONTACT US!
Other Converter
Small Hole
Low Flow Rate
Easy to be Blocked
YH CONSULTING LIMITED. C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
Warranty certificate www.vevor.com/support
VEVOR®
TOUGH TOOLS, HALF PRICE
NEED HELP? CONTACT US!
Other Converter
Small Hole
Low Flow Rate
Easy to be Blocked
C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
VEVOR®
TOUGH TOOLS, HALF PRICE
www.vevor.com/support
Brand : Vevor
Model : YB06-11
Category : Car part