99F250-CH - Car part Vevor - Free user manual and instructions

USER MANUAL 99F250-CH Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

REAR BUMPER

MODEL:99F250-CH

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

MODEL: 99F250-CH

Exterior view of a black plastic automotive bumper with mounting holes (no text or symbols visible)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

IMPORTANT SAFEGUARDS

WARNING: Read and understand this entire manual before operating or servicing this product. Failure to follow these warnings and instructions can cause personal injury or damage to valuable proper

• Avoid children using the product. And this product is not a toy. Do not a children to play.
• It is highly recommended to go to a professional auto repair shop for replacement installation.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly and use.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drug medication.
6. Product capabilities apply to properly and completely assembled product only
7. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate parts in a clean work area. Please keep small spare parts out of children's

SAVE THESE INSTRUCTIONS

FCC INFORMATION FOR LIGHT:

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment!

This device complies with Part 15 of the FCC Rules. Operation is subject to following two conditions:

1) This product may cause harmful interference.
2) This product must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this product not expressly approved by the party.responsible for compliance could void the user's authority to operate product.

Note: This product has been tested and found to comply with the limits for B digital device pursuant to Part 15 of the FCC Rules, These limits are des provide reasonable protection against harmful interference in a residential installation.

This product generates, uses and can radiate radio frequency energy, and if installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the distance between the product and receiver.
• Connect the product to an outlet on a circuit different from that to which receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

CORRECT DISPOSAL FOR LIGHT

This product is subject to the provision of european Directive 2012/19/EU. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories mar

with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical electronic devices.

SPECIFICATION

Model	99F250-CH
Material	Steel
Rating for light	DC12V 5W
Color	White&Black
Suitable vehicle	1999-2007-Ford F250/Ford F350

PACKAGE LIST

No.	Name	Picture	QTY
1	Rear Bumper		1
2	Mounting bracket		2
3	Bolt(M12*25)		8
4	Nut(M12)		8
5	Screw(M6*20)		2
6	buckle		2
7	Manual		1

INSTALLATION

STEP 1: Remove the Rear Bumper

Remove the screws on both sides of the bumper and the bracket, a remove the wiring of the original license plate light and than remove bumper.

Two industrial scenes: one showing a metal pipe with blue arrows pointing to a damaged material, the other showing a car exhaust pipe with visible exhaust pipes and a white vehicle (no text or symbols)

STEP 2: First of all, the loading bracket *2 is installed on the car f beam with M12*25 screws *4 and M12 nuts *4 respectively

Industrial machinery setup with rusted metal components and a mechanical clamp (no visible text or symbols)

STEP 3: Bumper mounting

Raise the body bumper to connect the loading bracket to the rear beam using M12*25 screws *4 and M12 nuts*4.Then reconnect the lid plate light power cord.

STEP 4: After fixing, connect the license plate light with the wiring h of the body, make it energized and check whether it can be used n

Cautions: If necessary, you can keep the license plate light of the original car and install it on the new bumper.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Exterior view of a black plastic automotive bumper with mounting brackets (no text or symbols visible)

BESOIN D'AIDE? CONTACTEZ-NOUS!

Two industrial scenes: one showing a metal conveyor belt with blue arrows, the other showing a large white spray bottle mounted on a metal frame (no visible text or symbols)

Industrial machinery setup with metal components and a rusted metal bracket (no visible text or symbols)

C/O YH Consulting Limited Bureau 147,

Maison Centurion, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT CE

E-CrossStu GmbH

Mainzer Landstr.69,

Exterior view of a black plastic automotive bumper with mounting brackets (no text or symbols visible)

BRAUCHEN SIE HILFE? KONTAKTIERE UNS!

Two industrial equipment photos: one showing a metal pipe assembly and another showing a car exhaust system (no visible text or symbols)

Close-up of industrial machinery components with no visible text or symbols

C/O YH Consulting Limited Büro 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EG-REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Exterior view of a black plastic automotive rear bumper (no text or symbols visible)

HO BISOGNO DI AIUTO? CONTATTACI!

Two industrial scenes: one showing a metal conveyor belt with blue arrows pointing to a damaged material, the other showing a white SUV parked under a vehicle (no visible text or symbols)

Close-up of industrial machinery components with no visible text or symbols

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122Australia

C/O YH Consulting Limited Ufficio 147,

Casa del Centurione, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REP.CE

E-CrossStu GmbH

Mainzer Landstr.69,

elettronica www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Front view of a black plastic automotive bumper with mounting holes (no text or symbols visible)

Two industrial scenes: one showing a metal conveyor belt with blue arrows, the other showing a white spray truck with visible text and pipe fittings (no readable signage)

Industrial machinery setup with metal components and a rusted metal bracket (no visible text or symbols)

Casa Centurión, London Road,

Staines upon Thames, Surrey, TW18 4AX

REPRESENTANTO DE LA CE

E-CrossStu GmbH

Mainzer Landstr.69,

Exterior view of a black plastic automotive bumper with mounting brackets (no text or symbols visible)

POTRZEBUJE POMOCY? SKONTAKTUJ SIĘ Z NAMI!

Two industrial scenes: one showing a metal pipe assembly and another showing a car exhaust system with blue arrows indicating features (no visible text or symbols)

Close-up of industrial machinery components with no visible text or symbols

Place, Rancho Cucamonga, Kalifornia 91730

C/O YH Consulting Limited Biuro 147,

Dom Centuriona, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REPREZENT KE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt nad Menem.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

ACHTERBUMPER

MODEL:99F250-CH

Front view of a black plastic automotive bumper with mounting holes (no text or symbols visible)

HULP NODIG? NEEM CONTACT MET ONS OP!

Two industrial scenes: one showing a metal pipe assembly and another showing a car exhaust system with visible exhaust pipes (no text or symbols)

Close-up of industrial machinery components with no visible text or symbols

STAP 3: Bumpermontage Til de

C/O YH Consulting Limited Kantoor 147, Centurion House, Londen Road, Staines-upon-Thames, Surrey, TW18 4AX

EG REP

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Exterior view of a black plastic automotive rear bumper (no text or symbols visible)

BEHÖVS HJÄLP? KONTAKTA OSS!

Two industrial scenes: one showing a metal pipe assembly with blue arrows, the other showing a car exhaust hood with visible 'SUPER DUTY' branding (no readable text or symbols)

Close-up of industrial machinery components with no visible text or symbols

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support