LT80250GA - Car part Vevor - Free user manual and instructions

Product Type	Custom Exhaust Pipe Kit
Brand	Vevor
Model	LT80250GA
Category	Auto Part
Material	Low Carbon Steel
Number of Pieces	8
Diameter	2.5 inches (approx. 63.5 mm)
Main Function	Automotive Exhaust System Modification
Assembly Method	Welding (welding tools not included)
Safety Precautions	Wear protective goggles and gloves when welding; comply with local emission and noise level laws
Maintenance	Check for leaks after installation; repair immediately if any issue
Spare Parts and Repairability	Complete kit of 8 pipes; repairable by welding
General Information	Electronic warranty and technical support at www.vevor.com/support

Frequently Asked Questions - LT80250GA Vevor

Is the LT80250GA kit compatible with all vehicles?

No, this kit is universal and requires cutting and welding to fit your vehicle. Check dimensions and ensure the modification complies with local regulations.

What tools are needed for installation?

You will need a welding machine, an angle grinder to cut tubes, gloves and protective goggles. Welding skills are recommended.

Does the kit come with detailed welding instructions?

The manual provides general assembly and safety instructions, but not a detailed step-by-step guide. It is recommended to call a professional if you lack experience.

What is the difference between low carbon steel and stainless steel?

Low carbon steel (GA model) is less corrosion resistant than stainless steel (SS model) but is easier to weld and less expensive. The choice depends on use and climatic conditions.

Does the LT80250GA kit modify vehicle noise?

Yes, modifying the exhaust pipe can increase noise levels. Check legal noise limits in your area before installation.

Does installation affect pollutant emissions?

Yes, any modification to the exhaust system can alter emissions. Ensure your vehicle remains compliant with local anti-pollution standards.

How to avoid exhaust leaks after welding?

Carefully weld each joint ensuring it is airtight. After installation, start the engine and inspect connections for leaks. Repair immediately if necessary.

Can I install this kit alone?

Installation requires welding and mechanical skills. If you are not experienced, it is best to have a professional install it to ensure safety and compliance.

What is the warranty for this product?

Vevor offers an electronic warranty certificate accessible at www.vevor.com/support. Check the site for detailed terms.

How to choose between the 8-piece and 16-piece models?

The 8-piece model (LT80250GA) is suitable for simple modifications. The 16-piece models offer more flexibility for complex configurations. Choose based on desired length and shape.

USER MANUAL LT80250GA Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

CUSTOM EXHAUST PIPE KIT

MODEL:

LT80250SS/LT80250GA/LT80300GA/LT160200GA/LT160225GA /LT160250SS/LT160250GA/LT160300GA

We continue to be committed to provide you tools with competitive price. "Save Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands. It does not necessarily mean to cover all categories of tools offered by us. You are reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

VEVOR®

CUSTOM

EXHAUST

PIPE KIT

Model: LT80250SS/ LT80250GA/ LT80300GA/ LT160200GAL/ T160225GA/ LT160250SS/ LT160250GA/ LT160300GA

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you receive. Please forgive us that we won't inform you again if there are any technology updates on our product.

Stainless Steel Tube for Automobile Exhaust Pipe Modification Instruction Manual

Product Overview

This stainless steel tube is specially designed for the modification of automobile exhaust pipes. It is characterized by high strength and corrosion resistance, which can meet your individualized needs for the vehicle's exhaust system.

Assembly Method

1. Before assembling, please ensure that you have the corresponding welding tools and skills, or seek the help of professionals.
2. According to the desired shape of the automobile exhaust pipe, cut and bend the stainless steel tube to fit the installation position of the vehicle.
3. Use the welding method to connect the stainless steel tubes together. Pay attention to make the welding points firm and sealed to prevent exhaust leakage.

Precautions

1. Modifying the vehicle's exhaust pipe may affect the vehicle's exhaust emissions and noise level. Please ensure that your modification complies with local laws and regulations.
2. During the welding process, be sure to take appropriate protective measures, such as wearing goggles and gloves, to protect your safety.
3. After the installation is completed, start the vehicle and check whether there is any leakage in the exhaust system. If there is any abnormality, it should be repaired in time. Please note that the above manual is only an example and you can modify and improve it according to the actual situation.

PARAMETER LIST

Model	amount	Size/material	picture
LT80250SS	8pcs	2.5inch/stainless steel
LT80250GA	8pcs	2.5inch/low carbon stee
LT80300GA	8pcs	3inch/low carbon steel
LT160200GA	16pcs	2inch/low carbon steel
LT160225GA	16pcs	2.25inch/low carbon stee
LT160250SS	16pcs	2.5inch/stainless steel
LT160250GA	16pcs	2.5inch/low carbon stee
LT160300GA	16pcs	3inch/low carbon steel

Manufacturer: Shanghai Muxin Muye Youxian Gongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

YH CONSULTING LIMITED. C/O YH Consulting Limited

Bureau 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

YH CONSULTING LIMITED. C/O YH Consulting Limited

Office 147, Centurion House, London Road, Staines-

upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia Imported into the

United States: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REP. DEL

REGNO UNITO

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

REP.CE

E-CrossStu GmbH

Mainzer Landstr.69,

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

YH CONSULTING LIMITADO. C/O YH Consulting

Limited Oficina 147, Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

NEED HELP? CONTACT US!

Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

LIABILITY. C/O YH Consulting Limited Office

147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

CUSTOM EXHAUST PIPE KIT

MODEL:

LT80250SS/LT80250GA/LT80300GA/LT160200GA/LT160225GA /LT160250SS/LT160250GA/LT160300GA

NEED HELP? CONTACT US!

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EG REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

YH CONSULTING LIMITED. C/O YH Consulting Limited

Office 147, Centurion House, London Road, Staines-

upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support