ZY-2X240L-0.7 - Trash can Vevor - Free user manual and instructions

USER MANUAL ZY-2X240L-0.7 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

TRASH CAN STORAGE BIN

USER MANUAL

MODEL:ZY-2X240L-0.7

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

TRASH CAN STORAGE BIN

MODEL:ZY-2X240L-0.7

Line drawing of a two-door industrial storage cabinet with perforated doors and side lockers (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. It reserves a clear interpretation of our user manual. The appearance of the product shall be: the product you received. Please forgive us that we won't inform you again if there are any or software updates on our product.

WARNING:

Read this material before using this product. Failure to do so can result in serious in

Assembly precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble if tired or when under the influence of alcohol, drugs or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting the Woc Tree.
8. For additional information regarding the parts listed in the following pages, please refer to Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.

Use precautions

1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near this item.
3. Do not exceed specified weight capacities.
4. Use only on a flat, level, hard, and smooth surface that can safely support a fully loade Hall Tree.
5. Use as intended only.
6. Inspect before every use; do not use if parts are loose or damaged.
7. The assembly of the product requires the participation of 2 people.

SAVE THIS MANUAL

PARTS LIST

A X1	B X1	C X1	D X2
E X1	F X1	G X2
H X2	J X2	M X2	N X8
O X8	P X4	Q X2	R X2
			[xccg]
S X2	T X4	U X88	V X80
W X12

ASSEMBLY STEP

1 A ×1 O ×2 U ×4

U O A

Install the hinge.

2 G ×2 O ×4 U ×8 X 2

U O

Technical line drawing of a rectangular panel with perforated panels and mounting brackets (no text or symbols)

Install the hinge.

3 © ×1 Ⓗ ×1 Ⓙ ×1 Ⓙ ×14 Ⓤ ×14

V U H A J C G V U

Note:

1. This step is to connect the side plate and the middle frame.
2. There are many details in the diagram, please distinguish the direction according to the diagram and place the parts according to the user manual before assembling.

4 ⑧ ×1 ⑩ ×2 ⑯ ×4

X1 X2 U X4 U O B

Install the hinge.

5 H ×1 J ×1 U ×14 V ×14 H V U B J G

Note:

1. This step is to connect the side plate and the side frame.

2. There are many details in the diagram, please distinguish the direction according to the diagram and place the parts according to the user manual before assembling.

6 N ×8 U ×16 V ×16

Technical diagram of a mechanical enclosure with labeled components and wiring, including a magnified inset showing connections between components.

Assemble the angle iron(x8).

7 D ×2 R ×2 T ×4 M ×2 U ×4 V ×4 W ×4 X 2

W V M T D R U

Assemble the handles.

8 U X8 D D O U

Note: When installing the upper panel (Dx2), the upper panel should be placed against the prevent the upper panel from over-flipping and damaging the hinge.

9 P x4 P

Assemble the gas pole(x4).

graph TD
    A["Open"] --> B["Close"]
    B --> C["Set Back to Open"]
    C --> D["Set Close"]
    D --> E["Set Open"]
    E --> F["Set Closed"]
    F --> G["Set Close"]
    G --> H["Set Closed"]
    H --> I["Set Close"]
    I --> J["Set Closed"]
    J --> K["Set Closed"]
    K --> L["Set Closed"]
    L --> M["Set Closed"]
    M --> N["Set Closed"]
    N --> O["Set Closed"]
    O --> P["Set Closed"]
    P --> Q["Set Closed"]
    Q --> R["Set Closed"]
    R --> S["Set Closed"]
    S --> T["Set Closed"]
    T --> U["Set Closed"]
    U --> V["Set Closed"]
    V --> W["Set Closed"]
    W --> X["Set Closed"]
    X --> Y["Set Closed"]
    Y --> Z["Set Closed"]

Note:

1. Disassemble the handle according to the diagram first, and then install it.
2. Follow the steps in Figure 1, 2, 3, 4 above to install the handle.
3. The handle should be installed vertically.
4. The inner parts of the red circle should be kept perpendicular to the handle and orient middle frame.
5. The effect of the handle installation is that the vertical state of the handle is locked, a horizontal state of the handle is open door.

graph TD
    A["Open"] --> B["90° Open"]
    B --> C["Close"]
    C --> D["Next Step 1: New parts are being opened"]
    D --> E["Next Step 2: New parts are opened"]
    E --> F["Next Step 3: New parts are opened"]
    F --> G["Next Step 4: New parts are opened"]
    G --> H["Next Step 5: New parts are opened"]
    H --> I["Next Step 6: New parts are opened"]

Note:

1. Disassemble the handle according to the diagram first, and then install it.
2. Follow the steps in Figure 1, 2, 3, 4 above to install the handle.
3. The handle should be installed vertically.
4. The inner parts of the red circle should be kept perpendicular to the handle and orient middle frame.
5. The effect of the handle installation is that the vertical state of the handle is locked, a horizontal state of the handle is open door.

12 U ×4

12 ① X4 O U E

Assemble the front door.

13 U X4 O U F

Assemble the front door.

14 ⑤ ×2

Line drawing of a wooden drawer with a hanging lock and chain, enclosed in a dashed circular border (no text or symbols)

Technical line drawing of a two-port storage cabinet with open lid and perforated panels (no text or symbols)

Assemble the chain.

Technical line drawing of a two-door industrial storage unit with perforated panels and mounting brackets (no text or symbols)

The assembly is complete.

Manufacturer:Shanghaimuxinmuyeyouxiangongsi

Address:Shuangchenglu803nong11hao1602A-1609shi,baoshanqu,shanghai200000CN.

ECREP:E-CrossStuGmbH.

MainzerLandstr.69,60329FrankfurtamMain.

UKREP: YHCONSULTINGLIMITED.

C/OYHConsultingLimitedOffice147,CenturionHouse,LondonRoad,Staines-upon-Thames,Surrey,TW184AX

ImportedtoAUS:SIHAOPTYLTD.

1ROKEVASTREETEASTWOODNSW2122Australia

ImportedtoUSA:SanvenTechnologyLtd.

Suite250,9166AnaheimPlace,RanchoCucamonga,CA91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a two-door industrial storage unit with perforated doors and side lockers (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

1 A ×1 O ×2 U ×4

U O A

Zainstaluj zawias.

2 G ×2 O ×4 U ×8 X 2

U O

Technical line drawing of a rectangular panel with perforated panels and mounting brackets (no text or symbols)

Zainstaluj zawias.

3 © ×1 Ⓗ ×1 Ⓙ ×1 Ⓤ ×1 Ⓘ ×14 Ⓧ ×14

Technical diagram of a device with labeled components and internal wiring, including V U and H-A connectors

Technical diagram of a mechanical enclosure with labeled components and an inset schematic showing wiring connections.

Zlóż kątownik (x8).

7 D ×2 R ×2 T ×4 M ×2 U ×4 V ×4 W ×4 X 2

W V M T D R U

Zlóż uchwyty.

8 U x8 D D O U

12 ① X4 O U E

Line drawing of a cabinet shelf with a hanging lock and a labeled component 'S' (no text or symbols beyond label)

Technical line drawing of a two-port storage cabinet with open lid and perforated panels (no text or symbols)

Złóż łańcuch.

Technical line drawing of a two-door industrial storage unit with internal compartments and mounting brackets (no text or symbols)

Machine Translated by Google

Producent:Shanghaimuxinmuyeyouxiangongsi

Adres:Shuangchenglu803nong11hao1602A-1609shi,baoshanqu,shanghai200000CN.

ECREP:E-CrossStuGmbH.

MainzerLandstr.69,60329FrankfurtamMain.

UKREP:YHCONSULTINGLIMITED.

C/OYHConsultingLimitedOffice147,CenturionHouse,LondonRoad,Staines-upon-Thames,Surrey,TW184AX

Importowane doAUS:SIHAOPTYLTD.

1ROKEVASTREETEASTWOODNSW2122Australia

Import do USA: SanvenTechnology Ltd.

Suite250,9166AnaheimPlace,RanchoCucamonga,CA91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a two-door industrial storage cabinet with perforated doors and side lockers (no text or symbols)

1 A ×1 O ×2 U ×4

U O A

Installare la cerniera.

2 G ×2 O ×4 U ×8 X 2

U O

Technical line drawing of a rectangular panel with perforated panels and mounting brackets (no text or symbols)

Installare la cerniera.

3 © ×1 Ⓗ ×1 Ⓗ ×1 Ⓙ ×1 Ⓘ ×14 Ⓥ ×14

Technical diagram of a device with labeled components and internal wiring, including V U connectors and measurement indicators.

Technical diagram of a mechanical enclosure with labeled components and an inset schematic showing wiring connections.

7 D ×2 R ×2 T ×4 M ×2 U ×4 V ×4 W ×4 X 2

W V M T D R U

graph TD
    A["11 Fastening"] --> B["Step ①: Top fastening with bolt"]
    B --> C["Step ②: Top fastening with bolt"]
    C --> D["Step ③: Top fastening with bolt"]
    D --> E["Step ④: Top fastening with bolt"]
    E --> F["90° Rotation of fastening part"]
    F --> G["90° Rotation of fastening part"]
    G --> H["90° Rotation of fastening part"]
    H --> I["90° Rotation of fastening part"]
    I --> J["90° Rotation of fastening part"]
    J --> K["90° Rotation of fastening part"]
    K --> L["90° Rotation of fastening part"]
    L --> M["90° Rotation of fastening part"]
    M --> N["90° Rotation of fastening part"]
    N --> O["90° Rotation of fastening part"]
    O --> P["90° Rotation of fastening part"]
    P --> Q["90° Rotation of fastening part"]
    Q --> R["90° Rotation of fastening part"]
    R --> S["90° Rotation of fastening part"]
    S --> T["90° Rotation of fastening part"]
    T --> U["90° Rotation of fastening part"]
    U --> V["90° Rotation of fastening part"]
    V --> W["90° Rotation of fastening part"]
    W --> X["90° Rotation of fastening part"]
    X --> Y["90° Rotation of fastening part"]
    Y --> Z["90° Rotation of fastening part"]
    Z --> AA["90° Rotation of fastening part"]
    AA --> AB["90° Rotation of fastening part"]
    AB --> AC["90° Rotation of fastening part"]
    AC --> AD["90° Rotation of fastening part"]
    AD --> AE["90° Rotation of fastening part"]
    AE --> AF["90° Rotation of fastening part"]
    AF --> AG["90° Rotation of fastening part"]
    AG --> AH["90° Rotation of fastening part"]
    AH --> AI["90° Rotation of fastening part"]
    AI --> AJ["90° Rotation of fastening part"]
    AJ --> AK["90° Rotation of fastening part"]
    AK --> AL["90° Rotation of fastening part"]
    AL --> AM["90° Rotation of fastening part"]
    AM --> AN["90° Rotation of fastening part"]
    AN --> AO["90° Rotation of fastening part"]
    AO --> AP["90° Rotation of fastening part"]
    AP --> AQ["90° Rotation of fastening part"]
    AQ --> AR["90° Rotation of fastening part"]
    AR --> AS["90° Rotation of fastening part"]
    AS --> AT["90° Rotation of fastening part"]
    AT --> AU["90° Rotation of fastening part"]
    AU --> AV["90° Rotation of fastening part"]
    AV --> AW["90° Rotation of fastening part"]
    AW --> AX["90° Rotation of fastening part"]
    AX --> AY["90° Rotation of fastening part"]

Nota:

12 ① X4 O U E

Line drawing of a cabinet shelf with a hanging lock and a labeled component 'S' (no text or symbols beyond label)

Technical line drawing of a two-port storage cabinet with open lid and perforated panels (no text or symbols)

Montare la catena.

Technical line drawing of a two-door industrial storage unit with internal compartments and mounting brackets (no text or symbols)

Machine Translated by Google

Importato in AUS:SIHAOPTYLTD.

1ROKEVASTREETWOODNSW2122Australia

Suite250,9166AnaheimPlace,RanchoCucamonga,CA91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a two-door industrial storage cabinet with perforated doors and side lockers (no text or symbols)

1 A ×1 O ×2 U ×4

U O A

Instalar la bisagra.

2 G ×2 O ×4 U ×8 X 2

U O

Technical line drawing of a rectangular panel with perforated panels and mounting brackets (no text or symbols)

Instalar la bisagra.

3 © ×1 Ⓗ ×1 Ⓙ ×1 Ⓤ ×1 Ⓙ ×14 Ⓥ ×14

Technical diagram of a device with labeled components and internal wiring, including V U connectors and measurement indicators.

Technical diagram of a mechanical enclosure with labeled components and an inset schematic showing wiring connections.

7 D ×2 R ×2 T ×4 M ×2 U ×4 V ×4 W ×4 X 2

W V M T D R U

graph TD
    A["11 Fastening"] --> B["Step ①: Top fastening with bolt"]
    B --> C["Step ②: Close fastening with bolt"]
    C --> D["Step ③: Close fastening with bolt"]
    D --> E["Step ④: Close fastening with bolt"]
    E --> F["90° Rotation: Abierto at 90°"]
    F --> G["Cerca: Circular cut with 90°"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333
    style F fill:#ffc,stroke:#333
    style G fill:#fcc,stroke:#333

Nota:

12 ① X4 O U E

Line drawing of a cabinet shelf with a hanging lock and a labeled component 'S' (no text or symbols beyond label)

Technical line drawing of a two-port storage cabinet with open lid and perforated panels (no text or symbols)

Ensamble la cadena.

Technical line drawing of a two-door industrial storage unit with internal compartments and mounting brackets (no text or symbols)

Machine Translated by Google

Fabricante: Shanghaimuxinmuyeyouxiangongsi

Dirección: Shuangchenglu803nong11hao1602A-1609shi,baoshanqu,shanghai200000CN.

ECREP:E-CrossStuGmbH.

MainzerLandstr.69,60329FrankfurtamMain.

REPÚBLICA CHECA: YHCONSULTINGLIMITED.

Oficina de C/OYH Consulting Limited, 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW184AX

Importado a AUS: SIHAOPTYLTD.

1ROKEVASTREETEASTWOODNSW2122Australia

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELL: ZY-2X240L-0.7

MODELL: ZY-2X240L-0.7

Line drawing of a two-door industrial storage cabinet with perforated doors and side lockers (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

1 A ×1 O ×2 U ×4

U O A

Montera gångjärnet.

2 G ×2 O ×4 U ×8 X 2

U O

Technical line drawing of a rectangular panel with perforated panels and mounting brackets (no text or symbols)

Montera gångjärnet.

3 © ×1 Ⓗ ×1 Ⓙ ×1 Ⓤ ×1 Ⓘ ×14 Ⓧ ×14

Technical diagram of a device with labeled components and internal wiring, including V U connectors and measurement indicators.

Technical diagram of a mechanical enclosure with labeled components and an inset schematic showing wiring connections.

7 D ×2 R ×2 T ×4 M ×2 U ×4 V ×4 W ×4 X 2

W V M T D R U

graph TD
    A["10 Pinning"] --> B["Step ①: Top joint"]
    B --> C["Step ②: Screw assembly with bolts"]
    C --> D["Step ③: Pitching component"]
    D --> E["Step ④: Assembly with nut"]
    E --> F["90° Rotation: 90°"]
    F --> G["90° Direction: Nära"]
    style A fill:#f9f,stroke:#333
    style G fill:#bbf,stroke:#333

graph TD
    A["Step 1: Pinning with fastener F x1 Q x1"] --> B["Step 2: Assembly with bolts"]
    B --> C["Step 3: Pitching to fastener"]
    C --> D["Step 4: Pitching to two parts"]
    D --> E["Step 5: Cutting into finished component with 90° angle"]
    E --> F["End: Nära"]

12 ① X4 O U E

Line drawing of a cabinet shelf with a hanging lock and a labeled component 'S' (no text or symbols beyond label)

Technical line drawing of a two-port storage cabinet with open lid and perforated panels (no text or symbols)

Sätt ihop kedjan.

Technical line drawing of a two-door industrial storage unit with internal compartments and mounting brackets (no text or symbols)

Machine Translated by Google

Tillverkare:Shanghaimuxinmuyeyouxiangongsi

Adress: Shuangchenglu803nong11hao1602A-1609shi,baoshanqu,shanghai200000CN.

ECREP:E-CrossStuGmbH.

MainzerLandstr.69,60329FrankfurtamMain.

UKREP:YHCONSULTINGLIMITED.

C/OYHConsultingLimitedOffice147, CenturionHouse, LondonRoad, Staines-upon-Thames, Surrey, TW184AX

Importerad till AUS:SIHAOPTYLTD.

1ROKEVASTREETEASTWOODNSW2122Australien

Importerad till USA: SanvenTechnologyLtd.

Suite250,9166AnaheimPlace,RanchoCucamonga,CA91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

OPSLAGBAK VOOR AFVALBAK

GEBRUIKERSHANDLEIDING

MODEL:ZY-2X240L-0.7

Line drawing of a two-door industrial storage cabinet with perforated doors and side lockers (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

1 A ×1 O ×2 U ×4

U O A

Technical line drawing of a rectangular panel with perforated panels and mounting brackets (no text or symbols)

Technical diagram of a device with labeled components and internal wiring, including V U connectors and measurement indicators.

Technical diagram of a mechanical enclosure with labeled components and an inset schematic showing wiring connections.

7 D ×2 R ×2 T ×4 M ×2 U ×4 V ×4 W ×4 X 2

W V M T D R U

Monteer de handgrepen.

8 U x8 D D O U

12 ① X4 O U E

Line drawing of a cabinet shelf with a hanging lock and a labeled component 'S' (no text or symbols beyond label)

Technical line drawing of a two-port storage cabinet with open lid and perforated panels (no text or symbols)

Technical line drawing of a two-door industrial storage unit with internal compartments and mounting brackets (no text or symbols)

De montage is voltooid.

Fabrikant: Shanghaiimuxinmuyeyouxiangongsi

Adres:Shuangchenglu803nong11hao1602A-1609shi,baoshanqu,shanghai200000CN.

ECREP:E-CrossStuGmbH.

MainzerLandstr.69,60329FrankfurtamMain.

UKREP:YHCONSULTINGLIMITED.

C/OYHConsultingLimitedKantoor147,CenturionHouse,LondonRoad,Staines-upon-Thames,Surrey,TW184AX

Suite250,9166AnaheimPlace,RanchoCucamonga,CA91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a two-door industrial storage unit with perforated doors and side lockers (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

1 A ×1 O ×2 U ×4

U O A

Technical line drawing of a rectangular panel with internal oval patterns and two mounting brackets (no text or symbols)

Technical diagram of a device with labeled components and internal wiring, including V U connectors and measurement indicators.

Note:

Technical diagram of a mechanical enclosure with labeled components and an inset schematic showing wiring connections.

7 D ×2 R ×2 T ×4 M ×2 U ×4 V ×4 W ×4 X 2

W V M T D R U

graph TD
    A["10 Pinning"] --> B["Step ①: Top joint"]
    B --> C["Step ②: Top bolt"]
    C --> D["Step ③: Top nut"]
    D --> E["Step ④: Top bolt with red oval highlighting part"]
    E --> F["90° Angle: Outer arm"]
    F --> G["90° Direction: Outer arm is bent"]
    G --> H["Ouvir (Outer arm) at 90°"]
    H --> I["Fermer (Outer arm) at 90°"]

Note:

12 ① X4 O U E

Line drawing of a cabinet shelf with a hanging lock and a labeled component 'S' (no text or symbols beyond label)

Technical line drawing of a two-port storage cabinet with open lid and perforated panels (no text or symbols)

Technical line drawing of a two-door industrial storage unit with internal compartments and mounting brackets (no text or symbols)

Machine Translated by Google

Fabricant:Shanghaimuxinmuyeyouxiangongsi

Adresse : Shuangchenglu803nong11hao1602A-1609shi,baoshanqu,shanghai200000CN.

ECREP : E-CrossStuGmbH.

MainzerLandstr.69,60329FrancfortMain.

UKREP: YHCONSULTINGLIMITED.

C/OYHConsultingLimitedBureau147, CenturionHouse, LondonRoad, Staines-upon-Thames, Surrey, TW184AX

1ROKEVASTREETEASTWOODNSW2122Australie

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELL:ZY-2X240L-0.7

MODELL:ZY-2X240L-0.7

Line drawing of a two-door industrial storage cabinet with perforated doors and side lockers (no text or symbols)

1 A ×1 O ×2 U ×4

U O A

Technical line drawing of a rectangular panel with perforated panels and mounting brackets (no text or symbols)

Technical diagram of a device with labeled components and internal wiring, including V U connectors and measurement indicators.

Technical diagram of a mechanical enclosure with labeled components and an inset schematic showing wiring connections.

7 D ×2 R ×2 T ×4 M ×2 U ×4 V ×4 W ×4 X 2

W V M T D R U

10 E x1 Q x1 ① ② ③ ④ Pay attention to the direction of these two parts! 90° E Offen 90° Schließen

Notiz:

11 F x1 Q x1 ① ② ③ ④ Pay attention to the direction of these two parts! 90° E Offen 90° Schließen

Notiz:

12 ① X4 O U E

Line drawing of a cabinet shelf with a hanging lock and a labeled component 'S' (no text or symbols beyond label)

Technical line drawing of a two-port storage cabinet with open lid and perforated panels (no text or symbols)

Technical line drawing of a two-door industrial storage unit with internal compartments and mounting brackets (no text or symbols)

Machine Translated by Google

Hersteller: Shanghaimuxinmuyeyouxiangongsi

Adresse: Shuangchenglu803nong11hao1602A-1609shi, baoshanqu, shanghai200000CN.

ECREP: E-CrossStuGmbH.

MainzerLandstr.69,60329FrankfurtamMain.

UKREP: YHCONSULTINGLIMITED.

C/OYHConsultingLimitedOffice147,CenturionHouse,LondonRoad,Staines-upon-Thames,Surrey,TW184AX

Suite250,9166AnaheimPlace,RanchoCucamonga,CA91730