ZY-3X240L-0.7 - Trash can Vevor - Free user manual and instructions

USER MANUAL ZY-3X240L-0.7 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

TRASH CAN STORAGE BIN

USER MANUAL

MODEL:ZY-3X240L-0.7

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

TRASH CAN STORAGE BIN

MODEL:ZY-3X240L-0.7

Line drawing of three identical industrial storage cabinets with perforated panels and side lockers (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. It reserves a clear interpretation of our user manual. The appearance of the product shall be: the product you received. Please forgive us that we won't inform you again if there are any or software updates on our product.

WARNING:

Read this material before using this product. Failure to do so can result in serious in

Assembly precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble if tired or when under the influence of alcohol, drugs or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting the Woc Tree.
8. For additional information regarding the parts listed in the following pages, please refer to Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.

Use precautions

1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near this item.
3. Do not exceed specified weight capacities.
4. Use only on a flat, level, hard, and smooth surface that can safely support a fully loade Hall Tree.
5. Use as intended only.
6. Inspect before every use; do not use if parts are loose or damaged.
7. The assembly of the product requires the participation of 2 people.

SAVE THIS MANUAL

PARTS LIST

A X1	-	B X1		C X2		D X3
E X1		F X2		G X3
H X3		J X3		M X3		N X12
O X12		P X6		Q X3		R X3
S X3		T X6		U X128		V X112
W X14

ASSEMBLY STEP

1 A x1 O x2 U x4

U O A

Install the hinge.

2 G ×3 O ×6 U ×12

X 3

U O

Technical line drawing of a rectangular panel with internal oval patterns and two mounting brackets (no text or symbols)

Install the hinge.

3 © ×1 Ⓗ ×1 Ⓙ ×1 Ⓙ ×1 Ⓘ ×14 Ⓥ ×14

V U H A J C G V U

Note:

1. This step is to connect the side plate and the middle frame.
2. There are many details in the diagram, please distinguish the direction according to the diagram and place the parts according to the user manual before assembling.

4 C ×1 H ×1 J ×1 U ×14 V ×14 H V U C G J

Note:

1. This step is to connect the side plate and the middle frame.
2. There are many details in the diagram, please distinguish the direction according to the diagram and place the parts according to the user manual before assembling.

5 B ×1 O ×2 U ×4

U O

Technical line drawing of a rectangular metal frame with internal perforated structure and mounting points (no text or symbols)

Install the hinge.

6 ⑥ ×1 ⭕ ×1 ⭕ ×14 ⭕ ×14

H x1 J x1 U x14 V x14 H B J G V U V U

Note:
1. This step is to connect the side plate and the side frame.
2. There are many details in the diagram, please distinguish the direction according to the diagram and place the parts according to the user manual before assembling.

8 D ×3 R ×3 T ×6 M ×3 U ×6 V ×6 W ×6 X 3

W V M T T D R U

Assemble the handles.

9 ① X12 D D D O U

Note: When installing the upper panel (Dx3), the upper panel should be placed against the prevent the upper panel from over-flipping and damaging the hinge.

10 P ×6

Technical line drawing of a mechanical cage with internal components and a magnified inset showing a valve mechanism (no text or symbols present)

Assemble the gas pole(x6).

11

X2 U X4 U

Install the hinge.

graph TD
    A["Open"] --> B["90° Open"]
    B --> C["Close"]
    C --> D["4 Part Pay Attention"]
    D --> E["Step 1: Close"]
    E --> F["Step 2: Close"]
    F --> G["Step 3: Close"]
    G --> H["Step 4: Close"]
    H --> I["Step 5: Close"]

Note:

1. Disassemble the handle according to the diagram first, and then install it.
2. Follow the steps in Figure 1, 2, 3, 4 above to install the handle.
3. The handle should be installed vertically.
4. The inner parts of the red circle should be kept perpendicular to the handle and orient middle frame.
5. The effect of the handle installation is that the vertical state of the handle is locked, a horizontal state of the handle is open door.

graph TD
    A["Open 90°"] --> B["Close"]
    B --> C["Step 1: Open to be finished"]
    C --> D["Step 2: Close after opening"]
    D --> E["Step 3: Pay attention to the direction of these two parts!"]
    E --> F["Step 4: Close after opening"]

Note:

1. Disassemble the handle according to the diagram first, and then install it.
2. Follow the steps in Figure 1, 2, 3, 4 above to install the handle.
3. The handle should be installed vertically.
4. The inner parts of the red circle should be kept perpendicular to the handle and orient middle frame.
5. The effect of the handle installation is that the vertical state of the handle is locked, a horizontal state of the handle is open door.

Technical diagram of a mechanical cage with labeled components O and U, showing internal structure and assembly details.

Assemble the front door.

15 ⑧ ×4

5 U X4 F

U O

Assemble the front door.

16 ① ×4

Technical line drawing of a modular metal enclosure with perforated panels and structural supports (no text or symbols)

U O

Assemble the front door.

Technical line drawing of a multi-level industrial storage unit with mounting brackets and structural supports (no text or symbols)

Assemble the chain.

Line drawing of a three-tiered storage cabinet with perforated panels and mounting brackets, shown with an inset close-up of the internal structure (no text or symbols)

The assembly is complete.

Manufacturer:Shanghaimuxinmuyeyouxiangongsi

Address:Shuangchenglu803nong11hao1602A-1609shi,baoshanqu,shanghai200000CN.

ECREP:E-CrossStuGmbH.

MainzerLandstr.69,60329FrankfurtamMain.

UKREP: YHCONSULTINGLIMITED.

C/OYHConsultingLimitedOffice147,CenturionHouse,LondonRoad,Staines-upon-Thames,Surrey,TW184AX

ImportedtoAUS:SIHAOPTYLTD.

1ROKEVASTREETEASTWOODNSW2122Australia

ImportedtoUSA:SanvenTechnologyLtd.

Suite250,9166AnaheimPlace,RanchoCucamonga,CA91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of three identical industrial storage cabinets with perforated panels and side lockers (no text or symbols)

1 A ×1 O ×2 U ×4

U O A

Installare la cerniera.

2 G ×3 O ×6 U ×12 X 3

U O

Technical line drawing of a rectangular panel with perforated panels and mounting brackets (no text or symbols)

Installare la cerniera.

3 © ×1 Ⓗ ×1 Ⓗ ×1 Ⓙ ×1 Ⓤ ×14 Ⓥ ×14

V U H A J C G V U

Technical line drawing of a rectangular metal frame with internal perforated structure and mounting points (no text or symbols)

Installare la cerniera.

6 H X1 J X1 U X14 V X14 H V U B J G V U

7 N ×12 U ×24 V ×24

N V U

Technical line drawing of a three-panel industrial enclosure with perforated panels and mounting brackets (no text or symbols)

8 D ×3 R ×3 T ×6 M ×3 U ×6 V ×6 W ×6 X 3

W V M T D R U

9 U x12 D D D O U

Technical line drawing of a metal cage structure with internal components and a magnified inset showing pipe connection (no text or symbols)

Technical line drawing of a modular metal enclosure with open lid and perforated panels (no text or symbols)

Technical diagram showing a mechanical assembly with labeled components and directional arrows indicating motion or assembly.

Installare la cerniera.

graph TD
    A["Step 1: Initial assembly"] --> B["Step 2: Assembly with bolts"]
    B --> C["Step 3: Assembly with bolts and connectors"]
    C --> D["Step 4: Assembly with bolts and connectors"]
    D --> E["Assembly with 90° angle"]
    E --> F["Final assembly with Aprire and Vicino"]

Nota:

graph TD
    A["13: F X2 Q X2"] --> B["Step ①: Top view of bolt"]
    B --> C["Step ②: Top view of nut"]
    C --> D["Step ③: Top view of bolt"]
    D --> E["Step ④: Top view of nut"]
    E --> F["90° rotation"]
    F --> G["90° cycle"]
    G --> H["Aprire: 90° rotation"]
    H --> I["Vicino: 90° cycle"]
    I --> J["Pay attention to the direction of these two parts!"]

Nota:

Technical diagram of a mechanical cage assembly with labeled components O and U, showing internal structure and mounting details.

Technical line drawing of a modular metal enclosure with open doors and internal compartments (no text or symbols)

U

Line drawing of a cabinet or drawer with a hanging hook and label 'S' (no text or symbols on the diagram itself)

Technical line drawing of a three-tiered modular storage unit with open top, showing internal compartments and mounting brackets (no text or symbols)

Montare la catena.

Line drawing of a three-tiered storage cabinet with perforated panels and mounting brackets, shown with an inset close-up of the handle (no text or symbols)

Importato in AUS:SIHAOPTYLTD.

1ROKEVASTREETWOODNSW2122Australia

Suite250,9166AnaheimPlace,RanchoCucamonga,CA91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of three identical industrial storage cabinets with perforated panels and side lockers (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

1 A ×1 O ×2 U ×4

U O A

Zainstaluj zawias.

2 G ×3 O ×6 U ×12

X 3

U O

Technical line drawing of a rectangular panel with internal oval patterns and mounting brackets (no text or symbols)

Zainstaluj zawias.

3 © ×1 Ⓗ ×1 Ⓗ ×1 Ⓙ ×1 Ⓤ ×14 Ⓥ ×14

V U H A J C G V U

Technical line drawing of a rectangular metal frame with internal perforated structure and mounting points (no text or symbols)

Zainstaluj zawias.

6 H X1 J X1 U X14 V X14 H V U B J G V U

7 N ×12 U ×24 V ×24

N V U

Technical line drawing of a three-panel industrial enclosure with perforated panels and mounting brackets (no text or symbols)

Złóż kątownik.

8 D ×3 R ×3 T ×6 M ×3 U ×6 V ×6 W ×6 X 3

W V M T D R U

Złóż uchwyty.

9 U x12 D D D O U

Technical line drawing of a metal cage structure with internal components and a magnified inset showing pipe connection (no text or symbols)

graph TD
    A["12 Pinning"] --> B["Step ①: Top-Left Roll"]
    B --> C["Step ②: Top-Right Roll"]
    C --> D["Step ③: Top-Left Roll with nut"]
    D --> E["Step ④: Top-Right Roll with nut"]
    E --> F["90° Rotation: Outer wheel, Inner wheel, Outer wheel"]
    F --> G["90° Rotation: Outer wheel, Inner wheel, Outer wheel"]
    G --> H["Zamkać Rotation: Outer wheel, Inner wheel, Outer wheel"]

Notatka:

Technical diagram of a mechanical cage assembly with labeled components O and U, showing internal structure and mounting details.

Technical line drawing of a modular metal enclosure with open doors and internal compartments (no text or symbols)

U

Line drawing of a cabinet or rack with a hanging hook and label 'S' (no text or symbols on the diagram itself)

Technical line drawing of a three-tiered storage cabinet with open top frame and perforated panels (no text or symbols)

Złóż łańcuch.

Line drawing of a three-tiered storage cabinet with perforated panels and mounting brackets, shown with an inset close-up of the handle (no text or symbols)

Machine Translated by Google

Producent:Shanghaimuxinmuyeyouxiangongsi

Adres:Shuangchenglu803nong11hao1602A-1609shi,baoshanqu,shanghai200000CN.

ECREP:E-CrossStuGmbH.

MainzerLandstr.69,60329FrankfurtamMain.

UKREP:YHCONSULTINGLIMITED.

C/OYHConsultingLimitedOffice147,CenturionHouse,LondonRoad,Staines-upon-Thames,Surrey,TW184AX

Importowane doAUS:SIHAOPTYLTD.

1ROKEVASTREETEASTWOODNSW2122Australia

Import do USA: SanvenTechnology Ltd.

Suite250,9166AnaheimPlace,RanchoCucamonga,CA91730

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELL:ZY-3X240L-0.7

MODELL:ZY-3X240L-0.7

Line drawing of three identical industrial storage cabinets with perforated panels and side lockers (no text or symbols)

1 A ×1 O ×2 U ×4

U O A

2 G ×3 O ×6 U ×12 X 3

U O

Technical line drawing of a rectangular panel with internal oval patterns and mounting brackets (no text or symbols)

V U H A J C G V U

Technical line drawing of a rectangular metal frame with internal perforated structure and mounting holes (no text or symbols)

7 N ×12 U ×24 V ×24

N V U

Technical line drawing of a three-panel industrial enclosure with perforated panels and mounting brackets (no text or symbols)

8 D ×3 R ×3 T ×6 M ×3 U ×6 V ×6 W ×6 X 3

W V M T D R U

9 U x12 D D D O U

Technical line drawing of a metal cage structure with internal components and a magnified inset showing pipe connection (no text or symbols)

Technical line drawing of a modular metal enclosure with open lid and perforated panels (no text or symbols)

Technical diagram showing a mechanical assembly with labeled components and directional arrows indicating motion or assembly.

13 F x2 Q x2 X 2 ① ② ③ ④ Pay attention to the direction of these two parts! E 90° Offen 90° Schließen

Notiz:

Technical diagram of a mechanical cage assembly with labeled components O and U, showing internal structure and mounting details.

Technical line drawing of a modular metal enclosure with open doors and internal compartments (no text or symbols)

U

Line drawing of a cabinet or drawer with a hanging hook and label 'S' (no text or symbols on the diagram itself)

Technical line drawing of a three-tiered modular storage unit with open lid and perforated panels (no text or symbols)

Line drawing of a three-tiered storage cabinet with perforated panels and mounting brackets, shown with an inset close-up of the handle (no text or symbols)

Machine Translated by Google

Hersteller: Shanghaimuxinmuyeyouxiangongsi

Adresse: Shuangchenglu803nong11hao1602A-1609shi, baoshanqu, shanghai200000CN.

ECREP: E-CrossStuGmbH.

MainzerLandstr.69,60329FrankfurtamMain.

UKREP: YHCONSULTINGLIMITED.

C/OYHConsultingLimitedOffice147,CenturionHouse,LondonRoad,Staines-upon-Thames,Surrey,TW184AX

Suite250,9166AnaheimPlace,RanchoCucamonga,CA91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of three identical industrial storage cabinets with perforated panels and side lockers (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

1 A ×1 O ×2 U ×4

U O A

2 G ×3 O ×6 U ×12

X 3

U O

Technical line drawing of a rectangular panel with internal oval patterns and mounting brackets (no text or symbols)

V U H A J C G V U

Note:

Technical line drawing of a rectangular metal frame with internal oval cutouts and mounting holes (no text or symbols)

7 N ×12 U ×24 V ×24

N V U

Technical line drawing of a three-panel industrial enclosure with perforated panels and mounting brackets (no text or symbols)

8 D ×3 R ×3 T ×6 M ×3 U ×6 V ×6 W ×6 X 3

W V M T D R U

9 U x12 D D D O U

Technical line drawing of a metal cage structure with internal components and a magnified inset showing pipe connection (no text or symbols)

Technical line drawing of a modular metal enclosure with open lid and perforated panels (no text or symbols)

Technical diagram showing a mechanical assembly with labeled components and directional arrows indicating motion or assembly.

graph TD
    A["12 Pinning"] --> B["Step ①: Top part with bolts"]
    B --> C["Step ②: Top part with bolts"]
    C --> D["Step ③: Top part with bolts"]
    D --> E["Step ④: Top part with bolts"]
    E --> F["90° Direction: Pay attention to the direction of these two parts!"]
    F --> G["90° Direction: Outer sheath with 'Ouvrir' label"]
    G --> H["Fermer"]

Note:

graph TD
    A["13: F X2 Q X2"] --> B["Step ①: Top view of bolt"]
    B --> C["Step ②: Close-up of bolt"]
    C --> D["Step ③: Close-up of bolt with nut"]
    D --> E["Step ④: Close-up of bolt with nut"]
    E --> F["90° rotation: Outer ring, Inner ring"]
    F --> G["90° cycle: Outer ring, Inner ring"]
    G --> H["Ouvir (Outer), Outer"]
    H --> I["Fermer (Inner)"]

Note:

Technical diagram of a mechanical cage assembly with labeled components O and U, showing internal structure and mounting details.

Technical line drawing of a modular metal enclosure with open doors and internal compartments (no text or symbols)

U

Line drawing of a cabinet or drawer with a hanging hook and label 'S' (no text or symbols on the diagram itself)

Technical line drawing of a three-tiered modular storage unit with open top, showing internal compartments and mounting brackets (no text or symbols)

Line drawing of a three-tiered storage cabinet with perforated panels and mounting brackets, shown with an inset close-up of the handle (no text or symbols)

Machine Translated by Google

Fabricant:Shanghaimuxinmuyeyouxiangongsi

Adresse : Shuangchenglu803nong11hao1602A-1609shi,baoshanqu,shanghai200000CN.

ECREP : E-CrossStuGmbH.

MainzerLandstr.69,60329FrancfortMain.

UKREP: YHCONSULTINGLIMITED.

C/OYHConsultingLimitedBureau147, CenturionHouse, LondonRoad, Staines-upon-Thames, Surrey, TW184AX

1ROKEVASTREETEASTWOODNSW2122Australie

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

OPSLAGBAK VOOR AFVALBAK

GEBRUIKERSHANDLEIDING

MODEL:ZY-3X240L-0.7

Machine Translated by Google

VEVOR®

TOUGH TOOLS, HALF PRICE

VUILNISBAK

OPSLAGBAK

MODEL:ZY-3X240L-0.7

Line drawing of three identical industrial storage cabinets with perforated panels and side lockers (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

1 A ×1 O ×2 U ×4

U O A

2 G ×3 O ×6 U ×12 X 3

U O

Technical line drawing of a rectangular panel with perforated panels and mounting brackets (no text or symbols)

V U H A J C G V U

Technical line drawing of a rectangular metal frame with internal perforated structure and mounting points (no text or symbols)

7 N ×12 U ×24 V ×24

N V U

Technical line drawing of a three-panel industrial enclosure with perforated panels and mounting brackets (no text or symbols)

8 D ×3 R ×3 T ×6 M ×3 U ×6 V ×6 W ×6 X 3

W V M T D R U

Monteer de handgrepen.

9 U x12 D D D O U

Technical line drawing of a metal cage structure with internal components and a magnified inset showing pipe connection (no text or symbols)

Monteer de gaspaal (x6).

11

Technical line drawing of a modular metal enclosure with open lid and perforated panels (no text or symbols)

Technical diagram showing a mechanical assembly with labeled components and directional arrows indicating motion or assembly.

graph TD
    A["12 Pinning"] --> B["Step ①: Top view of bolt"]
    B --> C["Step ②: Close-up of bolt"]
    C --> D["Step ③: Top view of bracket"]
    D --> E["Step ④: Top view of bracket with highlighted part"]
    E --> F["90° Open"]
    F --> G["90° Dichtbij Opening"]

graph TD
    A["Open"] --> B["90°"]
    B --> C["Dichtbij"]
    C --> D["Part 1: Top view"]
    D --> E["Part 2: Top view with bolts"]
    E --> F["Part 3: Top view with bolts"]
    F --> G["Part 4: Top view with bolts"]
    G --> H["Part 5: Top view with bolts"]
    H --> I["Part 6: Top view with bolts"]
    I --> J["Part 7: Top view with bolts"]
    J --> K["Part 8: Top view with bolts"]
    K --> L["Part 9: Top view with bolts"]
    L --> M["Part 10: Top view with bolts"]
    M --> N["Part 11: Top view with bolts"]
    N --> O["Part 12: Top view with bolts"]
    O --> P["Part 13: Top view with bolts"]

Technical diagram of a mechanical cage assembly with labeled components O and U, showing internal structure and mounting details.

Technical line drawing of a modular metal enclosure with open doors and internal compartments (no text or symbols)

U

Line drawing of a cabinet or drawer with a hanging hook and label 'S' (no text or symbols on the diagram itself)

Technical line drawing of a three-tiered modular storage unit with open top, showing internal compartments and mounting brackets (no text or symbols)

Technical line drawing of a three-tiered storage cabinet with perforated panels and mounting brackets, shown with an inset close-up of the internal structure (no text or symbols)

De montage is voltooid.

Fabrikant: Shanghaiimuxinmuyeyouxiangongsi

Adres:Shuangchenglu803nong11hao1602A-1609shi,baoshanqu,shanghai200000CN.

ECREP:E-CrossStuGmbH.

MainzerLandstr.69,60329FrankfurtamMain.

UKREP: YHCONSULTINGLIMITED.

C/OYHConsultingLimitedKantoor147,CenturionHouse,LondonRoad,Staines-upon-Thames,Surrey,TW184AX

Suite250,9166AnaheimPlace,RanchoCucamonga,CA91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELL: ZY-3X240L-0.7

MODELL: ZY-3X240L-0.7

Line drawing of three identical industrial storage cabinets with perforated panels and side lockers (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

1 A ×1 O ×2 U ×4

U O A

Montera gångjärnet.

2 G ×3 O ×6 U ×12

X 3

U O

Technical line drawing of a rectangular panel with internal oval patterns and mounting brackets (no text or symbols)

Montera gångjärnet.

3 © ×1 Ⓗ ×1 Ⓗ ×1 Ⓙ ×1 Ⓤ ×14 Ⓥ ×14

Technical diagram of a device with labeled components and wiring connections, including V U and H-A labels

Technical line drawing of a rectangular metal frame with internal perforated structure and mounting points (no text or symbols)

Montera gångjärnet.

6 H ×1 J ×1 U ×14 V ×14

H x1 J x1 U x14 V x14 H B J G V U V U

7 N ×12 U ×24 V ×24

N V U

Technical line drawing of a three-panel industrial enclosure with perforated panels and mounting brackets (no text or symbols)

8 D ×3 R ×3 T ×6 M ×3 U ×6 V ×6 W ×6 X 3

W V M T D R U

9 U x12 D D D O U

Technical line drawing of a metal cage structure with internal components and a magnified inset showing pipe connection (no text or symbols)

Montera gasstolpen (x6).

Montera gångjärnet.

graph TD
    A["Step 1: Pinning with two bolts"] --> B["Step 2: Screw assembly with bolts"]
    B --> C["Step 3: Rotation of parts with fasteners"]
    C --> D["Step 4: Assembly with fasteners and a red circle highlighting part attention"]
    D --> E["Assembly panel with 90° rotation and 90° Nära direction"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333

graph TD
    A["13: F X2 Q X2"] --> B["Step ①: Top view of bolt"]
    B --> C["Step ②: Top view of nut"]
    C --> D["Step ③: Top view of bolt with nut"]
    D --> E["Step ④: Top view of component with pulley"]
    E --> F["90° rotation: 90°"]
    F --> G["90° rotation: Nära rotation"]

Technical diagram of a mechanical cage with labeled components O and U, showing internal structure and assembly details.

Technical line drawing of a modular metal enclosure with open doors and internal compartments (no text or symbols)

U

Line drawing of a cabinet or drawer with a hanging hook and label 'S' (no text or symbols on the diagram itself)

Technical line drawing of a three-tiered modular storage unit with open top, showing internal compartments and mounting brackets (no text or symbols)

Sätt ihop kedjan.

Line drawing of a three-tiered storage cabinet with perforated panels and mounting brackets, shown with an inset close-up of the handle (no text or symbols)

Machine Translated by Google

Tillverkare:Shanghaimuxinmuyeyouxiangongsi

Adress: Shuangchenglu803nong11hao1602A-1609shi,baoshanqu,shanghai200000CN.

ECREP:E-CrossStuGmbH.

MainzerLandstr.69,60329FrankfurtamMain.

UKREP:YHCONSULTINGLIMITED.

C/OYHConsultingLimitedOffice147, CenturionHouse, LondonRoad, Staines-upon-Thames, Surrey, TW184AX

Importerad till AUS:SIHAOPTYLTD.

1ROKEVASTREETEASTWOODNSW2122Australien

Importerad till USA: SanvenTechnologyLtd.

Suite250,9166AnaheimPlace,RanchoCucamonga,CA91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of three identical industrial storage cabinets with perforated panels and side lockers (no text or symbols)

1 A ×1 O ×2 U ×4

U O A

Instalar la bisagra.

2 G ×3 O ×6 U ×12 X 3

U O

Technical line drawing of a rectangular panel with perforated panels and mounting brackets (no text or symbols)

Instalar la bisagra.

3 © ×1 Ⓗ ×1 Ⓗ ×1 Ⓙ ×1 Ⓤ ×14 Ⓥ ×14

V U H A J C G V U

Nota:

Technical line drawing of a rectangular metal frame with internal perforated structure and mounting points (no text or symbols)

Instalar la bisagra.

6 H ×1 J ×1 U ×14 V ×14

H x1 J x1 U x14 V x14 H B J G V U V U

7 N ×12 U ×24 V ×24

N V U

Technical line drawing of a three-panel industrial enclosure with perforated panels and mounting brackets (no text or symbols)

8 D ×3 R ×3 T ×6 M ×3 U ×6 V ×6 W ×6 X 3

W V M T D R U

9 U x12 D D D O U

Technical line drawing of a metal cage structure with internal components and a magnified inset showing pipe connection (no text or symbols)

Technical line drawing of a modular metal enclosure with open lid and perforated panels (no text or symbols)

Technical diagram showing a mechanical assembly with labeled components and directional arrows indicating motion or assembly.

Instalar la bisagra.

graph TD
    A["Step 1: Initial parts with bolted joints"] --> B["Step 2: Component arrangement with bolts"]
    B --> C["Step 3: Assembly of two parts with fasteners"]
    C --> D["Step 4: Assembly of two parts with fasteners"]
    D --> E["Assembly of a panel with bolts and fasteners"]
    E --> F["90° setting for assembly"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333
    style F fill:#ffc,stroke:#333
    note right of D Pay attention to the direction of these two parts!
    note right of E Abierto 90° Cerca

Nota:

Technical diagram of a mechanical cage assembly with labeled components O and U, showing internal structure and mounting details.

Technical line drawing of a modular metal enclosure with open doors and internal compartments (no text or symbols)

U

Line drawing of a cabinet or drawer with a hanging hook and label 'S' (no text or symbols on the diagram itself)

Technical line drawing of a three-tiered modular storage unit with open top, showing internal compartments and mounting brackets (no text or symbols)

Ensamble la cadena.

Line drawing of a three-tiered storage cabinet with perforated panels and mounting brackets, shown with an inset close-up of the handle (no text or symbols)

Machine Translated by Google

Fabricante: Shanghaimuxinmuyeyouxiangongsi

Dirección: Shuangchenglu803nong11hao1602A-1609shi,baoshanqu,shanghai200000CN.

ECREP:E-CrossStuGmbH.

MainzerLandstr.69,60329FrankfurtamMain.

REPÚBLICA CHECA: YHCONSULTINGLIMITED.

Oficina de C/OYH Consulting Limited, 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW184AX

Importado a AUS: SIHAOPTYLTD.

1ROKEVASTREETEASTWOODNSW2122Australia

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE