2x2 Squizzle - Vacuum Cleaner Flixxe - Free user manual and instructions
Find the device manual for free 2x2 Squizzle Flixxe in PDF.
User questions about 2x2 Squizzle Flixxe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual 2x2 Squizzle - Flixxe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 2x2 Squizzle by Flixxe.
USER MANUAL 2x2 Squizzle Flixxe
Intelligent and cordless wet/dry cleaner
Bedienungsanleitung
Instruction manual
Mode d'emploi
Manual de uso
Important safety instructions 1
Technical data 5
Overview 5
Installation 5
Operation 6
Maintenance 9
Troubleshooting 10
Warranty 11
GB
IMPORTANT SAFETY INSTRUCTIONS
KEEP THESE INSTRUCTIONS
For household use only.
-
Please read this manual carefully before use and keep it for future reference.
-
When using an electrical appliance, basic precautions should always be observed, including the following:
-
Failure to observe warnings and instructions may result in electric shock, fire and/or serious injury.
WARNING - To prevent fire, electric shock or injury, observe the following points:
- The appliance must not be used by (including children) with reduced physical, sensory or mental capabilities or by persons with a lack of experience and knowledge unless they are supervised or given instruction.
- The appliance must not be used by under the age of eight.
- Only use the appliance indoors on non-carpeted floor surfaces, such as vinyl, tiles, sealed wood, etc. Do not vacuum over loose objects or carpet edges. Stalling the brush can lead to premature belt breakdown.
- Prohibit use as a toy. Special care should be taken when using near children, pets or plants.
- Use only as described in this manual. Only use the accessories recommended by the manufacturer.
- Do not use if the mains cable or plug is damaged. Return the device to customer service if it has been dropped on the floor, damaged, left outside, dropped into water or does not work as it should.
- Do not touch the charger, including the charging plug and charging contacts, with wet hands.
- Do not insert any objects into the openings. Do not use when openings are clogged. Keep free of dust, lint, hair and anything else that may impede air circulation.
- Keep hair, loose-fitting clothing, fingers and all other body parts away from the openings and moving parts.
- Take particular care when cleaning on steps.
- Not suitable for vacuuming flammable or combustible liquids, such as petrol, or for use in areas where these substances may be present.
-
Do not vacuum up anything that is burning or releasing smoke, e.g. cigarettes, matches or hot ashes.
-
Do not use without a filter.
- Prevent unintentional switching on. Ensure that the switch is in the off position before lifting or carrying the appliance. Carrying appliance with your finger on the switc ing plugging in the appliance with the switch on in creases the risk of accidents.
- Always switch off the appliance before making any adjustments, changing accessories or storing it. This precautionary measure reduces the risk of accidentally starting the appliance.
- Only charge the appliance with the charger personified by FliXe. A charger that is suitable for one type of battery may increase the risk of fire if used for another battery.
- Only use the specially designed FliXe batteries for the appliance. The use of any other battery person lead to risk of Injury and fire.
- Under very unfavourable circumstances, pressurised liquid can escape from the battery. Avoid contact. In the event of accidental contact with the skin, rinse with water. If the liquid gets into the eyes, also consult a doctor. The escape of liquid from the battery can cause irritation or burns.
- Do not use damaged or modified batteries or appliances. Damaged or modified batteries can cause unforeseen reactions that can lead to fire, explosion or injury.
- Do not throw batteries or appliances into a fire or expose them to high temperatures. In the event of fire or at temperatures above 130^ there is a risk of explosion.
- Follow all charging instructions and do not charge the battery or appliance outside temperature range specified in the instructions. Improper charging or charging at temperatures outside the specified range may damage the battery and increases the risk of fire.
- Leave repair work to a trained person. Only use identical spare parts. This appliance contains a battery that can only be replaced by qualified persons. This is the only way to ensure safety of the appliance.
- This appliance contains battery cells that can not be replaced. Do not attempt to repair or modify the appliance or battery other than as described in the instructions for use and care.
-
Always switch off the appliance before connecting or disconnecting the motorised suction attachment.
-
Do not charge or store the appliance outdoors or in a car. Only charge, store or use the battery in a dry room where the temperature is higher than 4^ but lower than 40^ . The charger is intended for indoor use only.
- Do not vacuum up ultra-fine particles such lime, cement, sawdust, gypsum powder or ash.
- Do not use the appliance to vacuum up sharp objects such as metal nails, pieces of glass, metal paper clips or pens.
- Do not use the appliance to vacuum up hazardous materials and chemicals such as solvents, drain cleaners, strong acids or strong bases.
- Stop operation immediately if the appliance overheats, makes unusual noises, produces unusual odours, has low suction power or is leaking electricity.
- Switch off the vacuum cleaner and disconnect it from the socket for long-term storage.
- Clean the dirty water tank after each use to avoid potential blockages that can lead to low suction power, overheating of the motor or a reduced service life of the appliance.
- Store in a dry place after use.
- Do not place the appliance in standing water or submerge it.
- All data and technical instructions in this manual are based on the results of laboratory tests carried out by Flixxe or third parties.
The company reserves all rights to make final declarations.
- Always unplug the appliance before cleaning or servicing.
- Rolling the appliance over the power cord can be dangerous.
- Do not use the appliance if the depth of water is more than 5mm above the surface.
Area of use
- The cordless hard floor cleaner is use on indoor hard floors, e.g. vinyl, tiles, sealed wood, etc. Optimum performance may not be guaranteed when used on rough surfaces.
- Keep the appliance away from heat sources, such as a fireplace or radiator, to prevent deformation of the housing.
- Do not vacuum up flammable liquids, ultra-fine particles, sharp objects, hazardous substances, chemicals or other objects that are burning or giving off smoke as described above.
Cleaning solution information
- If a large amount of cleaning solution gets into the motor, this may cause damage to the appliance.
- Fill the solution according to the instructions in the 'Operation' section. We recommend using the cleaning solution supplied. Do not use the product with acidic or alkaline solutions or other environmentally harmful substances.
- Keep out of the reach of children. Avoid contact with eyes and skin; otherwise rinse thoroughly with water. If irritation persists, consult a doctor. If the product is swallowed, consult a doctor.
- Disposal of dirty water and cleaning solution must comply with local environmental regulations.
- Never use foaming cleaning agents such as soap or washing-up liquid as this will damage the appliance and invalidate the warranty.
Appliance information
- Do not attempt to repair or modify the appliance other than as described in the operating and cleaning instructions.
- Charge the appliance with the FIiXe plug-in power supply. Input voltage: 100-240V alternating current. Both high and low voltages can damage the plug-In power supply or the appliance or even injure the user.
- Take particular care when cleaning on steps.
- Ensure that the switch is in the off position before lifting or carrying the appliance. To prevent dirty water from entering the motor, do not lay the appliance flat or tilt it.
- To prevent accidental tripping, place the appliance in the charging station.
- Always insert the dirty water tank and the fresh water tank properly before use.
- Ensure that the appliance and plug-in power supply unit do not get wet to avoid the risk of fire or injury due to a short circuit.
Recycling instructions according to the German Battery Act (BattG)
The battery contains materials that are harmful to the environment and must therefore be removed from the appliance before disposal. The appliance must be switched off to remove the battery.
Batteries and accumulators must not be disposed of with household waste. Every consumer is obliged to dispose of all batteries and accumulators, regardless of whether they contain harmful substances or not, at a collection point in their municipality/neighbourhood or at a retailer so that they can be disposed of in an environmentally friendly manner.
Please only dispose of batteries and accumulators in a discharged state.
For this reason, batteries and accumulators are labelled with the symbol shown above.
Recycling instructions according to the WEEE
Old appliances must not be disposed of with household waste. Every consumer is obliged to hand in all appliances that have reached the end of their service life to a collection point in their municipality/neighborhood or to a retailer so that they can be disposed of properly and in an environmentally friendly manner.
The illustration above shows the waste bin symbol that indicates the separate collection of electrical and electronic equipment (WEEE).
For EU countries:
Information on the EU Declaration of Conformity can be found at www.flixxe.de

Symbols:
| Read the operating instructions | |
| Class II | |
| Short-circuit-proof safety isolating transformer | |
| Switch mode power supply | |
| For indoor use only | |
| --- | Gleichstrom |
| ~ | Wechselstrom |
TECHNICAL DATA:
| Product | FliXXe X-SERIES |
| Power input | 100-240 V |
| Voltage | 21.5 V 4000 mAh Li-ion |
| Rated power | 220 W |
| Running time | AUTO: approx. 35 min. MAX: approx. 20 min. |
| Charging time | 4-5 hours |
| Water flow rate | 30-100 ml/min |
| Fresh water tank capacity | approx. 0.7 l |
| Dirty water tank capacity | approx. 0.7 l |
| Protection class | IPX4 |
OVERVIEW:
Note: Accessories may vary depending on model. If you require additional accessories, please visit www.flixxe.de
- Self-cleaning button
- On/off switch/Operating mode selector
- Switch for changing operating mode
- Display
- Unlocking the dirty water tank
- Dirty water tank handle
- Dirty water tank
- Roller brush cover
- Pipe
- Voice control switch
- Loudspeaker
- Fresh water tank handle
- Roller brush
- Accessory holder
- Hepa filter
- Odour neutralising and cleaning solution
- Duct cleaning brush
18.Brush - Accessory holder
- Charger
- Charging station
- Self-cleaning symbol
- AUTO mode
- Voice mode display on/off
- Dirty water tank full
- Battery indicator
- Fresh water tank empty
- Battery charge indicator
- Cleaning intensity display
- Power mode
Fig. II
Assembly (Assembly/disassembly)
Note: Information on inserting the water tank and brush can be found under the sections 'Operation' and 'Maintenance'.
To assemble the handle, insert it into the appliance until you hear it click into place.
Fig.A-1
- If the handle needs to be released, press on the spring with a tool (e.g. a screwdriver) and remove the loosened handle from the appliance.
Fig.A-2
Operation (Getting ready for use)
- Charge the appliance for 4-5 hours before using it for the first time (for more information, see the charging instructions).
Based on the results of Flixxe laboratory tests. Laboratory temperature: 4^ - 40^ - Drucken Sie die Taste „EIN“, um das Gerät standardmäßig im AUTO-Modus zu starten.
Press the ON button again to switch the appliance off. Switch between AUTO, MAX and SUCTION mode by pressing the button...
Fig.B-1
Tips:
- The appliance starts in auto mode by default. Switch on while the appliance is upright. Press and hold for three seconds to switch between modes. If the model also has a dry mode, switch to this setting at the start so that the brush is not made wet.
- The appliance stops working when it is placed upright and starts running again when you tilt it backwards.
To avoid water leaking out, do not tilt the appliance backwards by more than 142 degrees.
Fig.B-1
- After use, place the appliance vertically charging station for charging and storage.
Fig.B-2
Note:
- Selecting a suitable mode depending on the fresh water tank capacity is crucial for maximising the effectiveness of dirt detection.
- Do not vacuum up liquid containing foam
In order to suck up any water remaining on the
on the
suction surface, the appliance switches off three seconds after being switched off.
- The suction mode is only available on certain models; please refer to the respective product.
FILLING THE FRESH WATER TANK
- Press the fresh water tank release button in order to remove it from the appliance.
Fig.B-3
- Open the tank lid and fill the tank with tap water up to the Max mark. If thorough cleaning is required, add a bottle cap of the solution to the fresh water and close the cap tightly.
Fig.B-4
Note: Only use water with a temperature below 60^ . DO NOT USE HOT WATER.
3. Place the tank back into the appliance. If you have carried out the process correctly, you should hear a clicking sound.
Fig. B-5
CHARGING INSTRUCTIONS
To charge the appliance, place it on the charging station and plug the plug-in power supply unit into a socket.
- To charge the appliance, connect the external charging cable to the charging station and to the socket.
- To avoid tripping hazards, place the appliance on the charging station near a wall while charging.
Fig.C-1
Warning:
Only charge the appliance using the plug-In power supply unit supplied by FIIXXe.
- If the appliance is not used for a longer period of time, it must be recharged once every three months in order to achieve optimum performance. It may take 4-5 hours to fully charge the battery.
- Store in a dry place. Protect the app sunlight and frost. Recommended temperature range: 4^ - 40^ .
SELECTING THE CLEANING MODE
AUTO-Mode
- In AUTO mode, the 'X'Sense' automatically detects how dirty the floor is and applies the appropriate amount of cleaning product and suction power.
- A red dirt control ring indicates that more dirt is detected and a blue ring indicates that less dirt is detected. This mode automatically provides best cleaning solution.
Fig. D-1
MAX-Mode
- When in AUTO mode, press the change button to switch to MAX mode. The AUTO indicator in the display goes out.
- In MAX mode, the maximum suction power of the appliance is applied and water/solution is sprayed for more thorough cleaning.
Fig. D-2
SUCTION mode
(only available on certain models)
- When in MAX mode, press the change button to switch to SUCTION mode.
- In SUCTION mode, the appliance only sucks up water and does not spray it. We recommend using this mode on wet surfaces.
Note: Keep sharp objects away from the digital display to prevent scratches and scuffs.
OPERATING TIME
- In AUTO mode, the operating time is approx. 35 minutes. When using MAX power, the running time is approx. 20 minutes.
The estimated running time data has been determined by a FliXXe laboratory
CHARGING TIME
A full charge cycle takes about 4-5 hours.
The estimated data has been determined by a FliXXe laboratory using ambient temperatures between 4^ and 40^ .
Display notifications (When in use)
Voice on/off
Low battery: the battery indicator flashes
Self-cleaning mode
from automatic mode
Maxmode
Dry mode (not available on every model)
Display flashes: fresh water tank is empty
Display flashes: dirty water tank is full or duct is blocked.
Display flashes; appliance requires self-cleaning
the
Voice prompt
Voice prompt (content may vary, authoritative in nature).
| Status Prompt | |
| Prompts on Prompts on | |
| Prompts deactivated Prompts deactivated | |
| Auto mode activat-ed as standard | Auto mode |
| Switch to Max mode | mode |
| Clean with water only | Clean with water only |
| Clean with cleaning solution as standard | Clean with cleaning so-lution |
| Battery charge: 10-20% | Low battery |
| Battery charge: 0-10% | Battery low; please char-ge |
| The fresh water tank is empty | Empty the fresh water tank; please refill with water and cleaning solution |
| Self cleaning required Start | Start self-cleaning cycle |
| Appliance not in the charging station | Place the appliance on the charging station |
| Dirty water tank is full | Dirty water tank full; please empty |
| Dirty water tank not installed | Please insert the dirty water tank |
| Roller brush is tangled up | Clean the roller brush |
| Roller brush not inserted | Insert the roller brush correctly |
| The appliance is switched off | Switch off |
| Start the charging pro-cess | The charging process has started |
| Start self-cleaning cycle. | Automatic detection of whether a self-cleaning cycle needs to be carried out. Please start the self-cleaning cycle |
| Battery not sufficient for self-cleaning | Battery low; start charging process |
| Sufficient battery charge to start the self-cleaning cycle | Start self-cleaning |
| Clean roller brush Clean roller brush | |
| Clean debris duct Clean debris duct | |
| Automatic detection Automatic detection | |
| Thorough cleaning | Thorough cleaning |
| Self-cleaning has finis-hed | Self-cleaning cycle has finished; please clean dirty water tank |
| Self-cleaning complete | Self-cleaning cycle com-plete; please clean dirty water tank |
Maintenance
Note:
- To ensure optimum performance and prevent odours, always clean and dry the dirty water tank, filter, roller brush and roller brush cover completely after each use.
- Ensure that all parts are inserted correctly, otherwise the appliance may not work properly.
After maintenance work, place the appliance upright on the charging station. Do not expose the appliance to direct sunlight and store it in a dry place.
Appliance
- Switch off the appliance before carrying out maintenance work to reduce the risk of injury.
Fig. E-1
- To clean the surface, use a cloth and a neutral cleaning agent. The cloth should be dry so that no water can enter the appliance.
Fig. E-2
- When the LED ring lights up red, remove the dirty water tank and clean the dirt sensor with a damp cloth or the cleaning tool.
Fig. E-3
DIRTY WATER TANK
- When the dirty water reaches the maximum level, the appliance switches off, shows a reminder on the display and makes an announcement.
- Pull the tank lid upwards to empty the dirty water tank. Remove any remaining dirt with the cleaning tool. Rinse out the inside of the dirty water tank and reinsert it into the appliance.
Fig.F-1
DIRTY WATER TANK LID
- If the lid of the dirty water tank and the filter inside are clogged, remove the tank lid and filter and rinse both parts with water.
Fig. F-2
DRY FILTER
Grasp the recessed area on each side of the dry filter and pull it upwards.
Rinse it under running water. The filter must be completely dry before you reinsert it into the lid of the dirty water tank.
A replacement dry filter is included with the appli
Fig. F-3
SELF-CLEANING OF THE ROLLER BRUSH
- Place the appliance on the charging station after use. The sensor automatically detects the degree of dirt.
- When you hear the message 'Start self-cleaning cycle', press the self-cleaning button and start the process.
- When the process is complete, the message 'Self-cleaning complete; clean dirty water tank' will be announced. At this point, the appliance will start charging.
- On selected models, the air-controlled drying of the brush starts, which can take up to 3 hours. Drying can be switched off by briefly pressing the self-cleaning brush again.
Fig.F-4
Note:
- Ensure that the charging station is plugged in and the battery level is more than 10% . Clean the dirty water tank before commencing the self-cleaning cycle and ensure that the water level in the fresh water tank exceeds 40% .
ROLLER BRUSH COVER
- Press the cover latch together and pull the cover upwards to remove it.
Fig. G-1
- Rinse it with water.
Fig. G-2
- When replacing the roller brush cover, always lock it into place to prevent leakage.
Fig. G-3
ROLLER BRUSH
- Grasp the roller brush tab and remove the roller brush by pulling it out sideways.
Fig. G-4
- Use the cleaning tool to remove hair and debris wrapped around the roller brush and rinse with water. Insert the roller brush into the accessory holder and allow it to dry completely
before reinserting it into the appliance.
Fig. G-5
- Remove hair and dirt from the roller brush chamber and the opening using a paper towel or damp cloth.
Fig. G-6
- Reinsert the roller brush by inserting the roller brush end into the right side of the holder and then attach the tab to the magnetic clasp on the left side to lock it in place.
Fig. G-7
Note: A replacement roller brush comes with the appliance to enable easy replacement.
Troubleshooting
| Problem | Solution |
| Appliance does not work | Restart after cooling down |
| Weak suction power | Insert the dry filter or clean it and allow it to dry completely |
| Stuck roller brush notifi-cation flashesPrompt:1. Clean the roller brush2. Insert the roller brush correctly | 1. Remove blockages2. Insert the roller brush correctly |
| WLAN display is off | Follow the steps for con-necting to WLAN |
| ‘Fresh water tank empty’ notification flashes.Prompt:Empty the fresh water tank; please refill with water and cleaning solution | Refill fresh water tank |
| ‘Dirty water tank full’ notification flashes.Prompt:Clean dirty water tank | Empty dirty water and reinsert dirty water tank |
| All lights have gone out during operation | Allow the appli-ance to cool down and restart |
| Battery charge notification flashes Prompt: Battery low, please charge | Charge or restart the appliance |
| LED ring lights up red. Prompt: Start self-cleaning cycle | Remove blockages, clean the dirt duct or restart the appliance |
| Self-cleaning symbol flashes | Start self-cleaning |
| Power indicator flashes | Contact customer service |
Note: If the troubleshooting guide above does not provide a solution, visit our website www.flixxe.de for further help.
WARRANTY
TWO YEAR WARRANTY
Only applies to purchases from authorised Flixxe GmbH dealers.
- Subject to compliance with the requirements described in this user manual and other conditions described below.
This warranty is subject to the legislation of the country in which the purchase was made. We grant a warranty of two years or a warranty period determined by applicable local laws, whichever is longer.
COVERAGE
- Your Flixxe appliance is guaranteed against material defects and manufacturing faults for a period of two years when used for domestic purposes in accordance with the Flixxe user manual.
Motor accessories and batteries purchased separately are covered by a one year warranty. - This warranty provides, at no additional cost, all labour and parts necessary to ensure that your appliance is in perfect working order during the warranty period.
- This warranty is only valid if the appliance is used in the country in which it was sold
NO COVERAGE
F1IXXe is not liable for any costs, damages or repairs incurred as follows:
- Appliances purchased from an unauthorised dealer.
- Careless operation or handling, incorrect operation, improper use and/or lack of maintenance or use not in accordance with the Filxxe user manual.
- Use of the appliance for anything other than normal household purposes, e.g. for commercial purposes or for hiring out.
- Use of parts that do not comply with the Filxxe user manual.
- Use of other parts and accessories not manufactured or recommended by Flixxxe.
- External factors that are not related to product quality and use, such as weather conditions, modifications, accidents, power failures, power surges or force majure.
- Repairs or modifications carried out by unauthorised persons.
- Blockages or other dangerous materials have not been removed from the appliance.
- Normal wear and tear, including normal wearing parts such as transparent containers, belt, filter, HEPA, brush and power cord (or where external damage or misuse is detected); carpet or floor damage not in accordance with the manufacturer's specifications.
- Reduction in battery discharge time due to aging or use of the battery.
WARRANTY LIMITATIONS
- All implied warranties with respect to your appliance, including warranties of merchantability or fitness for a particular purpose, are limited to the duration of this warranty.
- The warranty applies only to the original owner and the original battery; transfer is excluded.
This limited warranty gives you specific legal rights. You may also have other rights which vary from region to region. - The warranty may not apply in all cases, depending on factors such as use of the product, where the product was purchased or from whom you purchased the product. Please check the warranty carefully and contact the manufacturer if you have any questions.
WARRANTY SERVICES
Registration:
- We strongly recommend that you register your appliance via email to service@flixxe.de following purchase to enjoy exclusive benefits. To register, please enter the full serial number (re move the fresh water tank and you will find the serial number on the back of the appliance).
Fig. G-8
- Your warranty claims are not affected if you do not register your product.
Making a warranty claim:
- Please keep your proof of purchase. To make a claim under our limited warranty, you must provide your serial number and the original proof of purchase with the date of purchase and order number.
All work will be carried out by Flixxe or an authorised service centre. - Replaced defective parts become the property of Flixxe GmbH.
- A repair under this warranty does not extend the warranty period.
Contact our customer service via service@flixxe.de
SOMMAIRE
Controllo vocale on/off
