HG00593A - Headphones SILVERCREST - Free user manual and instructions

USER MANUAL HG00593A SILVERCREST

PDF online www.lidl-service.com

Black hardcover headband with earplids and microphone (no visible text or symbols)

Black hard-band earbuds with mesh headrests, shown against white background (no text or symbols)

Black hardcover headband with perforated earrest (no text or symbols visible)

BLUETOOTH® HEADPHONES

GB IE NI

BLUETOOTH® HEADPHONES

Operation and Safety Notes

FR BE

CASQUEBLUETOOTH®

Intended use....Page 6

Warnings used....Page 7

Trademark notices......Page 8

Scope of delivery....Page 8

Parts Description......Page 9

Technical Data Page 9

General safety instructions......Page 10

Safety instructions for built-in rechargeable batteries ...... Page 12

Before use......Page 12

Charging the battery......Page 13

Using the headphones......Page 13

Connecting the headphones to a second

Bluetooth ^® device......Page 14

Clearing paired devices ...... Page 15

Putting on the headphones......Page 15

Headphones button functions for music playback...... Page 15

Headphones button functions as a hands-free device......Page 16

Cleaning Page 17

Storage Page 18

Troubleshooting Page 18

Disposal Page 19

Simplified EU declaration of conformity ..... Page 20

Warranty Page 21

Bluetooth® Headphones

- Introduction

Congratulations on the purchase of your new product. You have chosen a high-quality product. The instructions for use are a part of this product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all the operating and safety instructions. The product must only be used as described and for the specified fields of application. When passing this product on to third parties, please be sure to include all documentation.

Intended use

This product, a consumer electronic, is intended to render audio transmitted from a smartphone, computer, or similar playback devices via Bluetooth connection. The product is also suitable as a hands-free device for mobiles; the mobile or the computer must support Bluetooth® 4.0 standard to do so.

The buttons built into the product allows you to select the piece of music from the playlist selected on the playback device. They are further used to adjust the volume of the product.

The headphones may be paired with two different devices (e.g. mobile and computer) at the same time to e.g. use both the telephone features of the mobile and the audio features of the computer. The built-in rechargeable battery allows for cordless operation.

This product was designed for personal use.

It must not be used for commercial purposes. Any other use is considered improper. Any claims resulting from improper use or due to

unauthorised modification of the product will be considered unwarranted. Any such use is at your own risk.

- Warnings used

These instructions for use contain the following warnings:

DANGER

A warning with this sign indicates a life threatening situation.

Failure to observe this warning may result in serious or fatal injuries.

■ Follow the instructions in this warning to prevent serious injuries or a danger to life!

CAUTION! EXPLOSION HAZARD!

A warning with this symbol and word "CAUTION! EXPLOSION HAZARD" indicates the potential threat of explosion.

Failure to observe this warning may result in serious or fatal injuries and potential property damage.

■ Follow the instructions in this warning to prevent serious injuries, a danger to life or property damage!

ATTENTION

A warning with this sign indicates potential property damage.

Failure to observe this warning may result in property damage.

■ Follow the instructions in this warning to prevent property damage.

This action sign indicates to wear suitable protective gloves! Follow the instructions to avoid hands striking or being struck by objects or being in contact with thermal or chemical

materials!

NOTE

☐ A note provides additional information to improve product use.

Trademark notices

-USB is a registered trademark of USB Implementers Forum, Inc.

• The Bluetooth ^® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by OWIM GmbH & Co. KG is under license.
• The SilverCrest trademark and trade name is the property of their respective owners.

Any other names and products may be trademarks or registered trademarks of their respective owners.

- Scope of delivery

NOTE: Take the product and the instruction for use out of the box and remove all packing materials.

1 Bluetooth® Headphones

1 Instructions for use

1 Charging cable

Parts Description

1 Control panel
2 Speakers with ear pads
3 Band
4 + Button
5 LED
6 > Button
7 < Button

8 Button
9 - Button
10 Microphone
11 Micro-USB socket
12 Micro-USB plug
13 USB plug
14 Set of instructions for use

Technical Data

Operating voltage built-in rechargeable battery:5V

= - (direct current) via USB charging socket 1× 3.7V rechargeable lithium-ion polymer battery with 230mAh (battery not replaceable.)

Charging time: approx. 3 hours

Operating time

(music & phone): approx. 15 hours (at medium volume)

Standby time: approx. 380 hours

Wireless standard: Bluetooth ^® 4.0

Supported profile: A2DP, AVRCP, HSP, HFP

Range: approx. 10 m

Dimensions: approx. 167 mm x 167 mm x 53 mm (w x h x d)

Weight: approx. 135g

Operating conditions: 0^ C - +45°C, max. 85% rel. humidity

Storage temperature: -20 °C - +60°C

Frequency band: 2,400 MHz-2,483.5 MHz

Max. transmitted power: 3 mW

- General safety instructions

Before using the product, please familiarise yourself with all of the safety instructions and instructions for use! When passing this product on to others, please also include all the documents!

WARNING! DANGER TO LIFE AND RISK OF ACCIDENT FOR INFANTS AND CHILDREN!

DANGER

Risk of suffocation! Never leave children unsupervised with the packaging material. The packaging material poses a suffocation hazard. Children frequently underestimate the dangers. The packaging material is not a toy.
This product may be used by children age 8 years and up, as well as by persons with reduced physical, sensory or mental capacities or lacking experience and/or knowledge, so long as they are supervised or instructed in the safe use of the product and understand the associated risks. Do not allow children to play with the product. Cleaning and user maintenance should not be performed by children without supervision. The product is not a toy.

RISK OF PROPERTY DAMAGE

This product does not contain any parts which can be serviced by the user. The rechargeable battery cannot be replaced.
- Keep the product away from moisture, dripping and splash water!
- Do not place burning candles or other open fire on or next to the product.
- Check the product before every use! Discontinue use if any damage to the product or the charging cable is detected!
If you notice smoke or unusual noise or odour, switch the product off immediately and remove the USB cable.

■ Sudden temperature changes may cause condensation inside the product. In this case, allow the product to acclimate for some time before using it again to prevent short circuits!
- Do not operate the product near heat sources, e.g. radiators or other devices emitting heat!
- Do not throw the product into fire and do not expose to high temperatures.

DANGER

- Do not try to open the product! It has no internal parts requiring maintenance.

DANGER

Switch the product off on airplanes, in hospitals, service rooms, or near medical electronic systems. The wireless signals transmitted could impact the functionality of sensitive electronics. Keep the product at least 20 cm from pacemakers or implantable cardioverter defibrillators, as the electromagnetic radiation may impair the functionality of pacemakers. The radio waves transmitted could cause interference in hearing aids. Do not place the product near flammable gasses or potentially explosives areas (e.g. paint shops) with the wireless components on, as the radio waves emitted can cause explosions and fire. The range of the radio waves varies by environmental conditions. In the event of wireless data transmission, unauthorised third parties receiving the data cannot be excluded. The OWIM GmbH & Co KG is not responsible for interference with radios or televisions due to unauthorised modification of the product. The OWIM GmbH & Co KG further assumes no liability for using or replacing cables and products not distributed by OWIM. The user of the product is fully responsible for correcting interference caused by such unauthorised modification of the product, as well as replacement of such products.

■

A warning with this symbol is to indicate that always

remember that excessive sound pressure or volumes from headphones or earphones can lead to damage to

the hearing. Always adjust the volume to a pleasant, not too loud level. If you have adjusted the volume of the headphones to be too high and use that for an extended period, it can damage the listener's hearing.

Safety instructions for built-in rechargeable batteries

■ Never open the product, repairs may only be carried out by qualified personnel.
■ CAUTION! RISK OF EXPLOSION! Do not throw the product into fire.
■ Avoid extreme environmental conditions and temperatures, which could affect rechargeable batteries, e.g. radiators / direct sunlight.
If rechargeable batteries have leaked, avoid contact with skin, eyes and mucous membranes with the chemicals! Flush immediately the affected areas with fresh water and seek medical attention!
- Do not cover the product during operation or charging. Otherwise the product can be heated.
This product contains a rechargeable battery, which can lead to fire, explosion or leakage of hazardous substances in case of incorrect application.

•

Before use

Before use, verify the package contents are complete and undamaged!

- Charging the battery

☐ The battery must be charged prior to first use.

☐TheLED 5 will flash red when the battery is drained. The battery should then be charged as soon as possible.

Plug the micro-USB plug 12 on the charging cable into the micro-USB socket 11 on the headphones! Plug the USB plug 13 on the charging cable into the USB port on a PC or a USB adapter (not included).

Note: The LED will flash red and blue whilst charging. Once the battery is fully charged, the LED will remain blue.

Once charging has completed, remove the micro-USB plug from the headphones.

- Using the headphones

Connect the headphones with a communication device.

Place the headphones near a switched on communication device (e.g. mobile or computer).

Pairing with a new Bluetooth® device: Hold the 📄 button 8 for approx. 6 seconds until the LED 5 flashes red and blue and you hear two beeps. This indicates the headphones are now in pairing mode, which remains active for 5 minutes. The headphones will switch off if they do not detect a Bluetooth® device to connect to and sound 4 beeps.

Now connect your communication device (mobile phone or computer) via Bluetooth® with the headphones. Please refer to the notes in the instructions for your communication device. Select the entry „HG00593“ from the list of devices detected by your computer or mobile. If prompted, enter code „0000“ to establish the connection.

Once the connection has been established, the LED will briefly flash twice every 4 seconds.
☐ If you want to connect a another device to the headphones, repeat the pairing as described previously.
☐ Please note, your communication device must support Bluetooth® Standard 4.0 to use all options.
If you come into range of the paired device with the headphones switched on, a Bluetooth® connection will automatically be established.
☐ You may need to approve the connection on the communication device. Please refer to the instructions for use of the communication device on this topic!
☐ If you leave the range of your communication device with your headphones, the LED will flash red every 2 seconds. If the connection is not restored within 5 minutes, the headphones will switch off.
The headphones may be manually switched off by holding the ⏻▶▶ button for 3 seconds until 4 beep sounds and the LED goes out.

Connecting the headphones to a second Bluetooth® device

The headphones may be connected to two Bluetooth ^® communication devices at the same time. If the headphones are already connected to a device, follow the steps below to connect to the second device:

□ Activate multipoint mode by briefly pressing the button 8 in pairing mode until four beeps sound.
Now connect to the second device; please note the above chapter „Using the headphones“.
To deactivate multipoint mode: disable the Bluetooth® connection on the communication device you wish to remove from multipoint

link. If necessary for your purposes, then extend the functions of the Bluetooth ^® transmission of the communication device still connected.

- Clearing paired devices

Once the headphones have been connected to a communication device, your computer or mobile will save the connection. If necessary (e.g. due to purchasing a new device), this list can be deleted (please refer to the instructions for use of the communication device on this topic).

- Putting on the headphones

The headphones can be adjusted to your head size, if necessary: the speakers 2 are secured to the band 3 with a metal rail for this purpose. Adjust these to ensure optimal comfort.

Please note the marking „L“ (= left) and „R“ (= right) on the inside of the band immediately above the speakers. Put on the headphones so the control panel 1 is on the right.

Headphones button functions for music playback

☐ Start a playlist on your playback device. Set the volume on the playback device to Maximum. You can adjust the headphones volume with the control unit 1. Music is played back through the speakers 2.
☐ The control panel has 5 buttons. These control the following functions:

Function Action
Play / Pause	Briefly press the ⚙▶▶ button 8
Next title	Briefly press the > button 6
Replay title	Briefly press < button 7
Previous title	Briefly press < button 7 2 x
Scan forward	Hold > button 6
Scan backwards	Hold < button 7
Increase volume	Press and hold + button 4 (sounds continuous beeps when reaching maximum volume)
Reduce volume	Press and hold - button 9 (sounds continuous beeps when reaching minimum volume)

Headphones button functions as a hands-free device

You may also use the headphones for telephone calls when used with a communication device which supports this function. If your communication device supports the Bluetooth ^® standard 4.0, you will be able to use the following functions:

Function Action
Answer/end call	Briefly press the ➕▶▶ button 8
Ignore call	Hold the ➕▶▶ button 8 approx.2 seconds until a beep sounds
Redial	Briefly press the ➕▶▶ button 8 twice
Enable/disable voice command	Simultaneously press the + button 4and the - button 9 briefly
Increase volume	Press and hold + button 4 (sounds continuous beeps when reaching maximum volume)
Reduce volume	Press and hold - button 9 (sounds continuous beeps when reaching minimum volume)
Send the call from the headphones to the mobile	Briefly press the ➕▶▶ button 8 twice
Send the call from the mobile to the headphones	Briefly press the ➕▶▶ button 8 twice
End the current call and answer call waiting*	Briefly press the ➕▶▶ button 8
Switch between two calls (toggle)*	Hold the ➕▶▶ button 8 approx. 2 seconds until it beeps

*These functions must be supported by your mobile service provider.

• The ringer and the caller's voice are rendered through the speakers 2.
• Music playback is automatically paused when a call is received.
  -Themicrophone 10 records your voice.
• Music continues after the call has been ended.

- Cleaning

ATTENTION

Potential damage to the product!

■ Switch the product off and remove all plugs before cleaning!

• Be sure moisture does not enter the product during cleaning to prevent damage to the product and related repairs.
  ☐ Only clean the product with a slightly dampened cloth and a mild spray!

Storage

Store the product in a dry environment, protected from dust and direct sunlight.
☐ To prevent battery deterioration, at longer storage the rechargeable battery has to be charged regularly.

- Troubleshooting

● = Fault
● = Possible cause
O = Action

No functions

Battery drained.
Recharge the battery as described in „Charging the battery“.

- No Bluetooth connection

Error operating the headphones.
○ Switch the headphones off and on again.
- Communication device error.
Separate the connection to the headphones and connect again.
- Check if other devices using Bluetooth standard 4.0 work with the communication devices.

Bluetooth® connection error.

○ Move closer to the devices connected via Bluetooth®.

No sound

The headphones volume is set to Minimum.

Press and hold the + button 4 to increase the volume.

Error operating the communication device.

○ Increase the volume on the playback device.

Bluetooth® connection error.

○ Move closer to the devices connected via Bluetooth®.

○ Disconnect Bluetooth ^® and reconnect.

● Unable to use all functions

- Communication device error.

○ Verify your communication device supports all functions.

- Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. The Green Dot is not valid for Germany.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1–7: plastics / 20–22: paper and fibreboard / 80–98: composite materials.

The product and packaging materials are recyclable, dispose of it separately for better waste treatment. The Triman logo is valid in France only.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

The adjacent symbol of a crossed out dustbin on wheels indicates this device is subject to Directive 2012/19/EU. This directive states at the end of the life this device must not be disposed of through regular household refuse but must be returned to special collection sites, recycling depots or waste management companies.

The built-in rechargeable battery cannot be removed for disposal.

This disposal is free of charge to you. Protect the environment and dispose properly.

Please contact your local waste management company or the city / municipal administration for more information.

● Simplified EU declaration of conformity

Hereby, OWIM GmbH & Co. KG, Stiftsbergstraße 1, DE-74167 Neckarsulm, GERMANY declares that the product (Bluetooth® Headphones, HG00593A, HG00593B, HG00593D) is in compliance with Directive 2014/53/EU and 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: www.owim.com

- Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you.

The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase. This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

CE

Indledning ...... Side 23

$$ (b \times h \times d) $$

Gewicht: ca. 135 g

GEFAHR VON SACHSCHÄDEN