XI 4B2E1B-84 - Dishwasher HAIER - Free user manual and instructions

Product Type	Built-in dishwasher
Brand	Haier
Model	XI 4B2E1B-84
Dimensions (W x D x H)	598 x 555 x 818-898 mm (adjustable height)
Power Supply	220-240 V / 50 Hz (standard)
Required Water Pressure	0.08 - 1 MPa
Capacity	12 place settings (estimated)
Noise Level	44 dB (estimated)
Energy Class	A (estimated)
Wash Programs	Multiple (details not provided)
Options	Delayed start (probable)
Safety	Anti-flood system, child lock (probable)
Height Adjustment	Yes, via front and rear feet (from 818 to 898 mm)
Fixing	Side to furniture or worktop
Anti-Vapor Strip	Included (to be installed under the worktop)
Kitchen Panel	Removable, max weight 9 kg
Tools Provided	Screws, drilling template, T15 key
Installation	By a qualified technician mandatory
Maintenance	Clean filters regularly (recommendation)
Spare Parts	Accessible via Haier after-sales service
Documents Included	Installation and user manual

Frequently Asked Questions - XI 4B2E1B-84 HAIER

How to adjust the dishwasher height?

The height can be adjusted from 818 to 898 mm by adjusting the front and rear feet. First tilt the appliance, then adjust the rear foot from the front using the provided screw. Then adjust the front feet to level.

What type of kitchen panel is compatible?

The panel must have a thickness of 16 to 22 mm and a maximum weight of 9 kg. Use the supplied drilling template to correctly position the fixing screws.

How to install the anti-vapor strip?

Apply the supplied adhesive strip under the worktop and on the sides of adjacent furniture to protect wood from moisture. Follow the marks in the manual.

Can I install the dishwasher under a hob?

No, it is forbidden to install the dishwasher under a hob or near heat sources. Observe safety distances.

What to do in case of water overflow?

The dishwasher is equipped with an anti-flood device that automatically stops the water supply. Check that the drain hose is not blocked and contact customer service if the problem persists.

How to fix the dishwasher to furniture?

Use the supplied screws to fix laterally to adjacent furniture or, if impossible, fix it to the worktop with the included brackets. Be careful with non-wood materials.

What water pressure is required?

The water pressure must be between 0.08 and 1 MPa. Check your installation before commissioning.

How to dismantle the dishwasher if needed?

Disconnect the electrical and hydraulic supplies, unscrew the fixing screws, then slightly lift the appliance to remove it. The furniture remains reusable.

What to do if the door does not close correctly?

Make sure the dishwasher is level. Incorrect foot adjustment can prevent full closure and cause steam leaks.

Where to find the serial number?

Note the serial number before installation, as it may be needed for repair. It is usually on the rating plate inside the door or on the side.

USER MANUAL XI 4B2E1B-84 HAIER

double movement hinges

Haier

FROM CLEAN

TO SHINE

EN | IT | FR | DE | ES | GR | NL | PT | SK | PL | CZ | RO | HU

SL | SR | LT | EE | LV | BG | HR | DA | FI | NO | SV | UA | TR

WELCOME

This installation manual is intended for kitchen manufacturers who will accommodate these products. To ensure safety and achieve the best results, carefully read this manual, including the safety instructions, and keep it for future reference. Before proceeding with installation, note the serial number, as it may be needed in case of repairs. Check for any damage during transport and consult a technician if in doubt before use. Always keep all packaging materials out of reach of children.

NOTE: The features and images contained in this document are for reference only and may change without notice.

Index

1 Safety notices for installation p.2-3 2 Where to install the dishwasher p.3 3 Dishwasher dimensions p.4-5 4 Step-by-step installation video p.6 5 Installation tools p.6 6 Built-in dimensions p.7

7 Instructions for dishwasher installation p.8 - 17

7.1 Installation of the anti-steam strip 7.2 Height adjustment 7.3 Adjustment of the rear foot 7.4 Adjustment of the front feet height 7.5 Tilt adjustment 7.6 Insertion into the built-in compartment 7.7 Fixing the front feet 7.8 Preparation of the panel 7.9 Installation of the panel 7.10 Fixing the machine to the kitchen

8 Connection to water and electrical network p.18 - 19

8.1 Connection diagram

8.2 Safety devices

9 Delivery to the user p.19

10 Dishwasher disassembly p.19

1 Safety warnings for installation

Observe these directions before beginning the installation of the product. Your safety is very important to us. Please read this information carefully before using the product.

• The installation must be carried out by a qualified technician who must be aware of and comply with the laws in force in the country of installation and the manufacturer's instructions;
• If manufacturer service is required to eliminate faults resulting from improper installation, such service is not covered by the fix;
• Remove the packaging material before operating the appliance;
• After unpacking the product, check that it is not damaged and, in case of problems, contact the service center before proceeding with installation and do not connect it to the power supply;
• A damaged product can cause a short circuit, electric shock, fire hazard, and other dangers;
• Check the packaging for accessories or accompanying materials (envelopes with screws, documents, brochures, etc.) and, if so, remove and store them;
• Incorrect installation may cause harm or injury to people, animals or belongings. The manufacturer cannot be held responsible for such harm or injury;
• Safe use is only guaranteed if installation has been carried out properly according to these instructions. In case of damage due to improper installation, the responsibility lies with the person who installed the product;
• During installation, the appliance must not be connected to the power supply;
• It is recommended to wear protective gloves during installation to avoid cut injuries;
• In case of incorrect installation, tampering with the device, and improper connection, the validity of the product warranty will expire;
• Make sure that when the product's power supply cable is completed, it is not accessible;
• After assembly, the power cord must not come into contact with moving parts of kitchen components (such as a drawer) and must not be exposed to mechanical stresses;
• When delivering the product to the end user, the technician must ensure that it has been installed correctly;
• Do not connect the product to the electrical network until the front panel has been fully installed. Otherwise, there may be an electrical hazard; • Take care during transport, the product is heavy;
• Before starting the installation, check all the dimensions of the built-in compartment by comparing them with the instructions contained in this manual. Note that it is possible to align the door with the doors of other furniture, even if it

exceeds the control panel in height;

• Make sure the installation area is stable and solid;
• Apply the protective film, supplied in the installation kit, under the worktop and on surrounding furniture. This film protects the furniture from humidity;
• Be careful when opening and closing the product;
• Incorrect installation can cause the product to tip over;
• The product must be level to function correctly, otherwise the door will not close properly, leading to the escape of hot steam.

Where to install the dishwasher

2

• Install and use this product in a closed, covered, dry, and well-ventilated environment; - Do not install the product in open environments exposed to atmospheric agents; • Install the product near an electrical outlet; - Use the product only when placed in a recessed compartment, otherwise you risk injury and burns; - Do not install the dishwasher under a cooktop; - Do not install the product near heat sources (radiators, stoves, etc.); - Do not place the product on carpets or similar surfaces; - Place the product on a clean, level, and stable surface.

3 Dishwasher dimensions

Dimensions in mm

Front axonometric view of the product

Front axonometric view with kitchen door

⚠ WARNING: if the kitchen panel weighs more than 9 kg contact customer service.

Dimensions in mm

Back view

Side view

4 Step-by-step installation video

You can watch the product installation video by scanning the QR Code:

or by clicking this

5 Installation tools

Required tools

Tools provided with the product

Dimensions in mm

Axonometric view

A

WARNING: The minimum height of the dishwasher is 818 mm; in this case, the distance between the kitchen door and the floor must be between 90 and 120 mm. If the dishwasher is raised (max. 898 mm), the door-to-floor distance must also increase proportionally, up to a maximum between 170 and 200 mm.

7 Instructions for dishwasher installation

7.1 Steam band installation

Apply the sticker band under the worktop and to the sides of the adjacent furniture;

7.2 Height adjustment

Incline the dishwasher by raising the back about 10 cm.

7.3 Rear foot adjustment

Adjust the rear foot height by operating from the front of the machine as indicated below.

7 Instructions for dishwasher installation

7.4 Front feet adjustment

Adjust the front feet directly. If necessary, lift the dishwasher slightly.

7.5 Tilt adjustment

Level the dishwasher by the vertical and horizontal planes.

7.6 Insertion into the built-in compartment

Insert the dishwasher into the built-in compartment and check measurements and tolerances.

7.7 Fixing the front feet

After checking all measurements, permanently fix the front feet to prevent them from loosening over time. This operation can also be done after installing the kitchen panel.

7 Instructions for dishwasher installation

7.8 Panel preparation

1.

Measure the distance between the top edge of the adjacent doors and the dishwasher;

2.

Transfer the measurement onto the kitchen panel and locate the center;

3.

Apply the drilling template and follow the instructions provided.

7.8 Panel preparation

4.

Remove the drilling template and apply the accessories.

WARNING: Ensure screw heads don't protrude from the panel's rear surface, especially if you install the handle.

7 Instructions for dishwasher installation

Installation of the panel 7.9

1.

Attach the panel to the dishwasher;

2.

Fix the panel to the lower part of the dishwasher;

3.

Fix the panel to the upper part of the dishwasher;

7.9 Installation of the panel

4.

Open the dishwasher door while holding the lower part of the kitchen panel, then unscrew the lower screws;

5.

Make sure the panel is fully inserted; fix the kitchen panel to the dishwasher using the supplied screws.

⚠ WARNING: Connect the dishwasher now to the water and electrical network, following the instructions in chapter 8.

7.10 Fixing the machine to the kitchen

Instructions for fixing the dishwasher laterally to the adjacent cabinets.

⚠ WARNING: If it is not possible to fix the dishwasher laterally, use the supplied brackets and fix it to the worktop; pay attention if the latter is not made of wood.

8 Drain water and electricity connection

8.1 Connection diagram

Column installation diagram

⚠ WARNING: Ensure that the water pressure is between 0.08 Mpa and 1 Mpa.

8.2 Safety devices

All dishwashers are equipped with an anti-overflow safety device which, in the event that the water exceeds the normal level due to a malfunction, automatically blocks the water flow and/or drains the excess water.

See the User Manual for more details.

Delivery to the user

9

At the end of installation:

• Inform the user about essential functions;
• Inform the user about all aspects relevant to safe use and handling;
• Deliver accessories and instructions for use and assembly to the user to be kept with care.

After installation is complete, remove the protective film, tape, and all other packing materials and remove the supplied accessories from inside the product.

NOTE: The actual appearance of the product depends on the model chosen.

Dishwasher disassembly

10

• Disconnect the product from the electrical and water supply;
• Unscrew the fastening screws;
• Slightly lift the product and pull it out completely;
• This product does not damage the furniture, which can also be used with a new appliance.

Haier

BENVENUTI

1. 

2.

2.

5.

Haier

WELCOME

5 Installation tools

Necessary tools

2.

2.

Haier

WELCOME

1. 

2.

2.

7.9 Plate installation

4.

Haier

WELCOME

7.3 Adjustment of the rear foot

2.

2.

Haier

WELCOME

1. 

7.2 Height adjustment

2.

2.

Haier

WELCOME

1. 

7.2 Height adjustment

7.5 Tilt adjustment

Level the dishwasher with respect to the vertical and horizontal plane.

2.

2.

Haier

WELCOME

2.

2.

Haier

WELCOME

7.5 Setting the tilt

2.

Transfer the dimension to the kitchen panel and determine the center;

3.

7.8 Preparing the panel

4.

2.

Haier

WELCOME

1. 

2.

2.

7.9 Panel installation

4.

Haier

WELCOME

G

H

Dimensions in mm

2.

7.8 Panel preparation

4.

2.

7.9 Panel installation

4.

Haier

WELCOME

1. 

2.

2.

3.

Haier

WELCOME

2.

2.

Haier

WELCOME

⚠ CAUTION: The minimum height of the dishwasher is 818 mm; in this case, the distance between the kitchen door and the floor must be between 90 and 120 mm. If the dishwasher is raised (max. 898 mm), the distance between the door and the floor must increase proportionally up to a maximum of between 170 and 200 mm.

2.

Transfer the measurement to the kitchen panel and determine the center;

3.

Install the drilling template and follow the included instructions;

7.8 Preparing the panel

4.

Remove the template and install the accessories;

2.

⚠ WARNING: If you cannot secure the dishwasher to the side, use the provided brackets and attach it to the worktop; be careful if the worktop material is not wood.

Haier

WELCOME

This installation guide is intended for kitchen manufacturers who will install these products. To ensure safety and achieve the best results, carefully read this guide, including the safety instructions, and keep it for future reference. Before proceeding with the installation, note the serial number, as it may be needed in case of repairs. Check for any transport damage and consult a technician if you are in doubt before use. Always keep all packaging materials out of reach of children.

i NOTE: The functions and images contained in this document are for reference only and may change without prior notice.

Index

or click on this

5 Installation tools

Required tools

⚠ WARNING: The minimum height of the dishwasher is 818 mm; in this case, the distance between the kitchen door and the floor must be between 90 and 120 mm. If the dishwasher is raised (max. 898 mm), the distance from the door to the floor must also increase proportionally, up to a maximum of 170 and 200 mm.

7 Installation instructions for the dishwasher

7.1 Installing the anti-condensation strip

1. 

7.2 Adjusting the height

Tilt the dishwasher by lifting the rear part by about 10 cm.

7.7 Securing the front feet

After checking all measurements, permanently secure the front feet to prevent them from loosening over time. This operation can also be performed after installing the kitchen worktop.

7 Installation instructions for the dishwasher

7.8 Preparing the worktop

1.

Measure the distance between the top edge of the adjacent doors and the dishwasher;

2.

Transfer the measurement to the kitchen worktop and locate the center;

3.

Apply the drilling template and follow the provided instructions.

7.8 Preparing the panel

4.

⚠ WARNING: Make sure that the screw heads do not protrude from the back of the panel, especially if you are installing a handle.

7 Installation instructions for the dishwasher

7.9 Installing the panel

1.

Attach the panel to the dishwasher;

2.

Attach the panel to the lower part of the dishwasher;

3.

Attach the panel to the upper part of the dishwasher;

7.9 Installing the panel

4.

Open the dishwasher door while holding the lower part of the kitchen panel, then unscrew the lower screws;

5.

Check that the board is fully inserted; attach the kitchen board to the dishwasher using the provided screws.

7 Installation instructions for the dishwasher

⚠ WARNING: Now connect the dishwasher to the water supply and electrical network, in accordance with the instructions in chapter 8.

7.10 Securing the dishwasher to the kitchen

Instructions for securing the dishwasher laterally to adjacent kitchen units.

⚠ WARNING: If it is not possible to secure the dishwasher laterally, use the supplied brackets and attach it to the worktop; take care if it is not made of wood.

Haier

1. 

7.5 Leveling adjustment

2.

7 Dishwasher installation instructions

7.9 Panel installation

1.

2.

Attach the panel to the lower part of the dishwasher;

3.

7.9 Installing the ceiling

4.

Haier

TERE TULEMAST

3.

7.5 Adjusting the tilt angle

7.7 Fixing the front legs

7.8 Preparing the panel

4.

2.

7.9 Installing the panel

4.

5.

CANDY

PLEASE CLICK

Or by clicking on this link

1. 

2.

2.

7.9 Panel installation

4.

Haier

WELCOME

1. 

2.

2.

5.

Haier

WELCOME

or by clicking on the following

5 Installation tools

Required tools

⚠ WARNING: The minimum height of the dishwasher is 818 mm; in that case, the distance between the kitchen door and the floor must be between 90 and 120 mm. If the dishwasher is raised (max. 898 mm), this distance must also be increased proportionally, up to a maximum of between 170 and 200 mm.

7 Installation instructions for the dishwasher

7.1 Installing the steam strip

7.3 Adjusting the rear foot

Adjust the height of the rear foot from the front of the machine according to the instructions.

7 Installation instructions for the dishwasher

7.4 Adjusting the height of the front feet

Act directly on the front feet. If necessary, lift the dishwasher slightly.

7.5 Adjusting the tilt

Align the dishwasher vertically and horizontally.

7.6 Inserting into the installation space

2.

7.8 Preparing the panel

4.

Remove the template and install the accessories.

⚠️ WARNING: Avoid screw heads protruding from the back of the panel when installing the handle.

7 Dishwasher installation instructions

7.9 Panel installation

1.

Attach the panel to the dishwasher;

2.

Attach the panel to the bottom of the dishwasher;

3.

Attach the panel to the top of the dishwasher;

7.9 Panel installation

4.

Open the dishwasher door while holding the bottom of the kitchen panel, then loosen the bottom screws;

5.

Check that the panel is fully inserted; attach the kitchen panel to the dishwasher using the provided screws.

7 Instructions for installing the dishwasher

⚠ WARNING: If you cannot secure the dishwasher laterally, use the supplied brackets and attach it to the worktop; be careful if the worktop material is not wood.

WELCOME

1. 

7.2 Height adjustment

7.5 Angle adjustment

2.

7.9 Installation of the panel

1.

2.

7.9 Installation of the panel

4.

WELCOME

1. 

7.2 Height adjustment

Lift the Kallista dishwasher by raising the rear about 10 cm.

7.3 Adjusting the rear foot

2.

2.

7.9 Installing the panel

4.

5.

Haier

WELCOME

7.5 Angle adjustment

2.

2.

Haier

WELCOME

7.5 Angle adjustment

2.

2.

Haier

WELCOME!

3.

2.

2.

Haier

WELCOME

1. 

7.2 Height adjustment

7.5 Tilt adjustment

2.

2.

7.9 Panel mounting

4.

Haier