HDW13F0S1 - Dishwasher HAIER - Free user manual and instructions
Find the device manual for free HDW13F0S1 HAIER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Place Settings | 13 |
| Control Type | Electronic Touch Controls |
| Energy Efficiency Class | A++ |
| Noise Level | 49 dB |
| Power Supply | 220-240 V ~ 50 Hz |
| Rated Power | 1900 W |
| Width | 600 mm |
| Height | 850 mm |
| Depth | 590 mm |
| Net Weight | 45 kg |
| Number of Programmes | 5 (Eco, Intensive, Glass, Quick, Normal) |
| Drying System | Condensation Drying |
| Water Consumption per Cycle | 9.5 L |
| Delay Start | 1-24 Hours |
| Half Load Option | Yes |
| Adjustable Upper Rack | Yes |
| Cutlery Basket | Yes |
| Salt Indicator | Yes |
| Rinse Aid Indicator | Yes |
| Safety Features | Child Lock, Flood Protection |
| Filter System | Self-Cleaning Three-Stage Filter |
Frequently Asked Questions - HDW13F0S1 HAIER
What is the correct way to load plates and bowls?
Place plates facing the center and bowls with the opening downward so water can reach all surfaces. Ensure that large items do not block the spray arms.
How often should I clean the filter?
Clean the main filter at least once a week or after every heavy-use cycle. Rinse it under water and gently brush to remove debris, then reinsert it properly.
Why is there water left at the bottom after a cycle?
A small amount of water in the sump is normal to keep seals moist. If excess water remains, check the drain hose for kinks or a blocked filter, and ensure the drain pump is not clogged.
Can I use regular salt instead of dishwasher salt?
No, you must use special dishwasher salt. Regular table salt contains additives that can damage the water softener. Always fill the salt reservoir before starting a cycle.
How do I activate the child lock?
To activate the child lock, press and hold the Delay and Program buttons simultaneously for 3 seconds. The indicator light will turn on. To deactivate, repeat the same procedure.
What does the "E1" error code mean?
The E1 error typically indicates a water supply issue. Check if the water tap is open, the inlet hose is not kinked, and the water pressure is adequate.
How to maintain the spray arms?
Remove the spray arms by unscrewing the retaining nut. Rinse them under water and use a toothpick to clear any clogged nozzles. Reattach firmly before use.
Is it necessary to rinse dishes before loading?
No, just scrape off large food residues. The dishwasher is designed to handle soiled dishes. Pre-rinsing wastes water and can actually reduce detergent effectiveness.
How to program a delayed start?
Press the Delay button repeatedly to set the desired delay from 1 to 24 hours. Then select a program and close the door. The appliance will start automatically after the delay.
What type of detergent should I use?
Use dishwasher powder, gel, or tablets designed for automatic dishwashers. For best results, follow the dosage recommendations on the packaging and consider the water hardness level.
User questions about HDW13F0S1 HAIER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual HDW13F0S1 - HAIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HDW13F0S1 by HAIER.
USER MANUAL HDW13F0S1 HAIER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAIER
Model : HDW13F0S1
Category : Dishwasher