VSF716-B2 - Wall mount SANUS - Free user manual and instructions

USER MANUAL VSF716-B2 SANUS

Technical line drawing of a mechanical assembly with mounting flanges and a curved bracket (no text or symbols)

VSF716-B2

VSF716-S2

INSTRUCTION MANUAL

GET IT RIGHT

THE FIRST TIME

Follow this step-by-step instruction manual to speed up your installation.

Want to watch a video that shows how easy this DIY project will be?

Watch it now at: SANUS.com/2791

HeightFinder Recommended placement Price per unit: $1.50 Cost per unit: $4.00 Rate per unit: $6.00 Amount of delivered: $8.00 Delivery rate: 35.94%

Get it right the first time. HeightFinder™ shows you where to drill.

Check it out at: SANUS.com/2567

Two men in a busy office environment, one wearing a headset and the other seated at a computer workstation (no visible text or symbols)

Our install experts are standing by to help.

Call us at:

US: 800-359-5520

EMEA: [phone]

UK: 0800 056 2853

AUS: [phone]

Before you begin

Remove the stand from your TV — if attached.

Install any accessories you may have purchased — if they require the TV to be removed from the wall for assembly. The TV is removable for future accessory purchases.

Protect the face of your TV when laying it down for installation.

Diagram of a computer monitor with a black arrow pointing to a handle, showing no text or symbols.

Diagram showing a device with an arrow pointing to a panel, mounted on a stand (no text or symbols present)

Soft clean surface

IMPORTANT SAFETY INSTRUCTIONS – PLEASE READ MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS

Please read through these instructions completely to be sure you're comfortable with this easy install process.

Check your TV owner's manual to see if there are any special requirements for mounting your TV.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product,

contact Customer Service: US: 800-359-5520 [EMEA]: [phone] [UK]: 0800 056 2853 [AUS]: [phone].

CAUTION: Avoid potential personal injuries and property damage!

• This product is designed ONLY to be installed into wood studs, solid concrete or concrete block.
  — DO NOT INSTALL INTO DRYWALL ALONE — DRYWALL ALONE WILL NOT HOLD THE WEIGHT OF YOUR TV.
• This product is designed for INDOOR USE ONLY.
• The wall must be capable of supporting five times the weight of the TV and mount combined.
• Do not use this product for any purpose not explicitly specified by manufacturer.
  ● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.

TV Weight Limit

(including accessories)

DO NOT EXCEED

35 lbs. (15.8 kg)

If your TV (including accessories) exceeds this weight, this mount is NOT compatible.

Visit SANUS.com or call customer service to find a compatible mount.

Wall Construction

ONLY install on these acceptable wall types.

Unsure

Call

Customer

Service

[EMEA]: [phone]

[UK]: 0800 056 2853

[AUS]: [phone]

CAUTION:

DO NOT install in drywall alone

Drywall alone will NOT hold the weight of your TV.

wood studs Solid conc

Diagram of a wooden fence with four posts and a magnified inset showing a rectangular block (no text or symbols)

ACCEPTABLE ACCB

rete or concrete block

Illustration of a brick wall with a magnified inset showing a cinder block (no text or symbols)

ABLE

Tools Needed

Measure

Pencil Level Tape

ScrewdriverTape

Electric Drill

Socket Wrench

Wood Stud Install

Stud Finder

Awl

Drill Bit

Concrete Install

Drill Bit

Hammer

STEP 1

Attach TV Bracket to TV

WARNING:

This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included my parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

NOTE:

Not all hardware included will be used.

STEP 1 Parts and Hardware

TV Screws

(qty. 4 each) [Only one size fits your TV]

M4

M6

M8

M8 x 35mm

Washers (qty. 4 each

M4

M6/M8

Spacers [If necessary] (qty. 4 each)

M4/M6/M8

Technical line drawing of a cylindrical mechanical component with 22mm dimension label (no text or symbols beyond the measurement)

TV Bracket

(qty. 1)

Technical line drawing of a mechanical component with mounting holes and internal features (no text or symbols)

Only one screw size fits your TV.

M4

O

M6

O

M8

O

01

If your TV included

inset spacers or wall mount adapters, see

Troubleshooting on PAGE 21.

1.2 Select TV Screw Length and Spacers1.1 Select TV Screw Diameter

[TV brackets lay flat on your TV]

Use short TV screws 01

Spacers 03 not needed.

- Flat Back TV with Extra Space Needed

[for deep inset holes or cable interference]

• Rounded or Irregular Back TV

[TV brackets NOT resting flat on your TV]

Diagram of a device with a green arrow pointing to a component, showing no text or symbols.

Use long TV screws 01 and spacers 03 to create extra space between the TV and TV bracket.

Inset Holes Cables Rounded Back

Diagram illustrating cable connector installation steps with labeled components and directional arrows

CAUTION: Verify adequate thread engagement with your screw 01, washer 02, spacer 03 combination AND TV bracket 04.

— Too short will not hold your TV.

— Too long will damage your TV.

Too Short Too Long Correct

1.3 Attach TV Bracket to Your TV

1 POSITION Top of TV 04 200 x 200 200 x 100 20010075 100 x 100 75 x 75

Center TV bracket 04 over your TV hole pattern as shown.
Various hole positions included for non-centered TV hole patterns.

2 SECURELY TIGHTEN 04 4X A NO SPACER SPACER NEED B 02 01 03 02 01

STEP 2

Attach Wall Plate to Wall

WARNING:

This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are

included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.

Never use damaged parts!

NOTE:

Not all hardware included will be used.

Parts and Hardware for STEP 2

Drill Template

P WALL PLATE COVER (ATTACHED) Arm Assembly C CABLE COVERS (ATTACHED)

06 x1

Lag Bolt 1/4 x 2 ¾ in. 07 x2

Washer

1/4 in.

For concrete installations ONLY

CAUTION:

Do not use in drywall or wood

Concrete Anchor

x2

Pure mechanical component diagram without any text, numbers, or symbols

Fischer UX10 x 60R

STEP 2A Attach Wall Plate

Wood Stud Installation

CAUTION: Avoid potential personal injury or property damage!

• Drywall covering the wall must not exceed 5/8 in. (1.5 cm)
  • Minimum wood stud size: nominal 2 x 4 in. (5.1 x 10.2 cm) actual 1 ½ x 3 ½ in. (3.8 x 8.9 cm)
  • Stud center must be verified

Min. 1 ½ in. (3.8 cm) Max. 5/8 in. (1.5 cm) Min. 3 ½ in. (8.9 cm)

1 LOCATE

2 VERIFY

3 MARK

4 POSITION TEMPLATE 05 2X Visit HeightFinder™ sanus.com /2567 TIP: To calculate your precise wall plate location, check out our HeightFinder at sanus.com [www.sanus.com/2567].

5 DRILL 2¾ in. (7.0 cm) 1/8 in. (3 mm) 2X CAUTION: Be sure you drill into the CENTER of the stud.

6 REMOVE COVERS P 06 P

STEP 2A (continued)

7 SECURELY TIGHTEN 06 07 08 2X CAUTION: Avoid potential personal injury or property damage! Both lag bolts 07 MUST BE firmly tightened to prevent unwanted movement of arm assembly 06. Ensure the wall plate is securely fastened to the wall before continuing on to the next step. TIP: You can make small level adjustments by loosening the bottom lag bolt 07 and shifting the wall plate until level.

8 INSERT COVERS P 06 P

STEP 2B Attach Wall Plate

Solid Concrete or Concrete Block Installation

CAUTION: Avoid potential personal injury or property damage!

• Mount the arm assembly 06 directly onto the concrete surface (no surface covering)
  • Minimum solid concrete thickness: 8 in. (20.3 cm)
  • Minimum concrete block size: 8 x 8 x 16 in. (20.3 x 20.3 x 40.6 cm)

1 POSITION TEMPLATE Visit HeightFinder™ sanus.com /2567 05 TIP: To calculate your precise wall plate location, check out our HeightFinder at sanus.com [www.sanus.com/2567].

STEP 2B (continued)

2 DRILL 3 in. (7.5 cm) 3/8 in. (10 mm) 2X CAUTION: Never drill into the mortar between blocks.

3 INSERT ANCHORS 2X 09 CAUTION: Be sure the anchors 09 are seated flush with the concrete surface.

4 REMOVE COVERS P 06 P

5 SECURELY TIGHTEN 06 07 08 2X

CAUTION: Avoid potential personal injury or property damage!

Both lag bolts 07 MUST BE firmly tightened to prevent unwanted movement of arm assembly 06. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.

Diagram showing a device with labeled components and directional arrows, including a light bulb icon and numbered point 07.

TIP: You can make small

level adjustments by loosening the bottom lag bolt 07 and shifting the wall plate until level.

6 INSERT COVERS P 06 P

STEP 3

Attach TV to Wall Plate

WARNING:

Before starting assembly, verify this part is undamaged. If damaged, do not return the damaged item to your dealer; contact

Customer Service. Never use damaged parts!

Parts and Hardware for STEP 3

Securement Screw

10-32 x 1/4 in.

10

x1

Hex Key

5/32 in. 11 x1

1 HANG YOUR TV HEAVY! You may need assistance with this step. 04 06

2 SECURELY TIGHTEN 04 06 11 10 CAUTION: Avoid potential personal injury or property damage! Always make sure your securement screw 10 is tightened, so the TV is securely fastened to the arm assembly 06.

Manage Cables

1 ROUTE CABLES C 06 C IMPORTANT: Pull arm 06 to its full extension, to leave enough slack and prevent stretching the cables when the arms are moved.

2 ATTACH COVERS C C

Adjustments

LEVEL ADJUSTMENT TILT ADJUSTMENT

Diagram of a computer monitor with a scroll and cable, showing internal components (no text or symbols)

1 2 11 10

L

Technical diagram showing mechanical components with numbered parts and a green directional arrow indicating rotation or movement.

CAUTION:

Screw 10 MUST be loosened before turning screw L.

CAUTION: Injury or pro

Avoid potential personal damage!

Always make sure your securement screw 10 is tightened, so the TV is securely fastened to the arm assembly 11.

Your TV should adjust easily when moved, then stay in place.

Adjust the tilt tension knobs Ⓣ if your TV naturally tilts up or down.

NOTE: If you do not intend to adjust the tilt for different viewing actions, you can tighten the tilt tension knobs (T), to prevent wanted movement. If needed, use hex key to tighten more firmly.

Technical diagram showing a mounted device with labeled parts and an inset view of the internal structure.

REMOVE THE TV

HEAVY! You may need assistance with this step.

1

2 10 11

3 04 04 06

Troubleshooting

TV SUPPLIED SPACERS

Use your TV supplied spacer for:

- Flat Back TV [TV brackets lay flat on your TV]

NOTE: M8 screws can be used without the washer for extra thread engagement.

FLAT BACK

Diagram of a device with a green arrow pointing to a component, showing no text or symbols.

TV Supplied Spacer

Supplied cer

CAUTION: Avoid potential injury or property damage!

Use the correct screw length for adequate thread engagement.

- Too short will not hold the TV.

- Too long will damage the TV.

If you are uncertain about your hardware selection, contact Customer Service

Use your TV supplied spacer and spacer 03 for:

• Flat Back TV with Extra Space Needed

[for deep inset holes or cable interference]

• Rounded or Irregular Back TV

[TV brackets NOT resting flat on your TV]

NOTE: M8 screws can be used without the washer for extra thread engagement.

ROUND BACK CABLES

Diagram showing cable installation process with labeled components and directional arrows indicating movement

Three mechanical components shown in line drawings: a cylindrical cap, a threaded bolt, and a flat pin (no text or symbols)

TV Supplied Spacer

Supplied sacer 03

CAUTION: Avoid potential injury or property damage!

Use the correct screw length for adequate thread engagement.

- Too short will not hold the TV.

- Too long will damage the TV.

▲ Too Long

Correct

Illustration of five different tools and a power tool, including a remote control, screwdriver, and push-button (no text or symbols present)

Massive betonl

Bel de klantenservice: US: 800-359-5520 [EMEA]: [phone] [UK]: 0800 056 2853 [AUS]: [phone]

Massive betong

Måttband

Penna
Vattenpass

Skruvmejsel

Elborr

Hylsnyckel

Regelsökare

Pryl

Ring kundtjänst:

US: 800-359-5520 [EMEA]: [phone]

[UK]: 0800 056 2853 [AUS]: [phone]

FULLY ASSEMBLED MOUNT

3.36 [85.2] 11.64 [295.6] 12.02 [305.2]

TOP VIEW - EXTENDED

60° T0 90°

TOP VIEW - RETRACTED

3-D

Technical line drawing of a mechanical assembly with two plates and a curved arm (no text or symbols)

SIDE VIEW - EXTENDED

5° 15° 16.05 (407.6)

SIDE VIEW - RETRACTED

ONE MORE THING: BE A WINNER!

SANUS PRODUCTS | BRANDS | LEARN | TOOLS | MEDIA | SUPPORT | CONTACT Product Registration Home - Product Registration - Product Information Step 2 - Product Information We're glad you chose to register your SANUS product! What is our choice in YSL, like - Just For Requiring your product? - you may enter for a choice to win a $50 coupon (only to spend before the first purchase or buy another item). SANUS has hydromade products. Which one did you choose? We just need a little info from you. Model number: VL220-81 Lot number: About help finding your lot number ? Yes, enter one in the saveplaces By selecting this rule, you are verifying that you can a legal resident of the 976 880 United States and have at least twelve months (25 years of age on the date of the Sweepplante entry registration ?) Register * Can purchase it necessary. COUNTER OR WITH A PURCHASE WILL NOT IMPROVE YOUR CODE BY PRINCE. By participating in the transaction, you should be accepted and kept the order until. For a resale of the first order phone: dlt.htm * The product website is registered or verification, including registration or age.

Register your new mount and tell us how you like it for a chance to win in our monthly sweepstakes.

Entering is quick and easy. Visit SANUS.com/1234 and follow three simple steps for your chance to win.

"Monthly Prize" sweepstakes rules and restrictions apply. Visit SANUS.com/1234 for details.

Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Woman standing beside a modern TV wall with a yellow sofa, no visible text or symbols

When you share your handiwork with your friends, tag

sanusspaces

for a chance to be featured in the Inspiration Gallery on SANUS.com.

SANUS.com

WE MAKE IT EASY

SanusSystems

CHAT WITH US

pinterest.com/Sanus

BE INSPIRED

SanusSystems

WATCH AND LEARN

800-359-5520 • [e-mail] • SANUS.com

SANUS • 6436 City West Parkway • Eden Prairie, MN 55344 USA

©2018 Milestone AV Technologies. All rights reserved. SANUS is a division of Milestone.

All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

6901-602351 00