FS5W051 - Power bank Xtorm - Free user manual and instructions
Find the device manual for free FS5W051 Xtorm in PDF.
User questions about FS5W051 Xtorm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Power bank in PDF format for free! Find your manual FS5W051 - Xtorm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FS5W051 by Xtorm.
USER MANUAL FS5W051 Xtorm
natural_image
Line drawing of two electronic devices with circular components and a magnifying glass (no text or symbols)SPECIFICATIONS PRODUCT OVERVIEW1 2
5.000 mAh Li-Poly / 18.5Wh
Wireless 15W/7.5W Apple iPhone USB-C PD 18W
USB-C PD 18W input
106x68x13 mm
152 grams
+ 1x USB-C to USB-C cable 1x Manual
natural_image
Technical line drawings of a mechanical component with labeled parts (no text or symbols)Output Wireless 15W (7.5W Apoe Phone)
Output USB-C PD 18W
Input USB-C PD 18W
Power Button
Digital Capacity Indicator
CHARGING YOUR DEVICE3 RECHARGING THE POWER BANK 4
text_image
OR COMPATIBLE DEVICES3A Snap the Power Bank to the back of your phone magnatically or connect the USB-C end of the charging cable to the USB-C PD output of the Power Bank and the other end to the input of your device. The charging will start automatically.
3B Charging some devices requires a charging cable other than the one supplied. E.g. an Apple Lightning ^® or a Micro USB cable.
natural_image
Technical line drawings of three electronic components: a plug, a connector, and a side panel (no text or symbols)4A Connect the USB-C end of the charging cable to output 2 of the Power Bank and the USB end to a wall charger.
4B For the fastest charging possible use a 18W USB-C PD charger. This will fully recharge the Power Bank within 1.5 hours.
LED POWER INDICATOR5 IN THE BOX 6
text_image
188% 188%5A Press the Power Button once to display the battery level remaining in the Power Bank via the LED display. Improved Power Button function:
- single press to turn on/off the display
- double press to fully turn on/off the Power Bank
5B The display shows the remaining battery percentage between 0% (empty) and 100% (fully charged).
5C The fast charge indicator will light up when you are using the correct cable for fast charging your device. (20W USB-C PD and higher).
1
7
3
FS5W051
Wireless Power Bank
USB-C to USB-C Cable
Manual
EN - ENGLISH
1 SPECIFICATIONS
2 PRODUCT OVERVIEW
3 CHARGING YOUR DEVICE
3.A Snap the Power Bank to the back of your device magnetically or connect the USB-C end of the charging cable to the USB-C PD output of the Power Bank and the other end to the input of your device. The charging will start automatically.
3.B Charging some devices requires a charging cable other than the one supplied. E.g. an Apple Lightning ^b or a Micro USB cable.
4 RECHARGING THE POWER BANK
4.A Connect the USB-C end of the charging cable to output 2 of the Power Bank and the USB end to a wall charger.
4.B For the fastest charging possible use a 18W USB-C PD charger. This will fully recharge the Power Bank within 1.5 hours.
5 LED POWER INDICATOR
5A Press the Power Button once to display the battery level remaining in the Power Bank via the LED display. Improved Power Button function: - single press to turn on/off the display - double press to fully turn on/off the Power Bank
5B The display shows the remaining battery percentage between 0% (empty) and 100% (fully charged).
5C The fast charge indicator will light up when you are using the correct cable for fast charging your device. (20W USB-C PD and higher).
6 IN THE BOX
NL - NEDERLANDS
1 SPECIFICATIES
2 PRODUCT OVERZICHT
3 OPLADEN VAN JOUW APPARAAT
EN When recycling this product, please follow WEEE battery recycling procedures. Contact your local recycling organization for more information.
XTORM SAFETY CHECK WARNINGS
1. TEMPERATURE CONTROL
Provided with a temperature control chip that prevents overheating.
2. OVERLOAD PROTECTION
Protects both the internal battery as well as the battery of the attached device from overcharging.
3. SECURED POWER MANAGEMENT
Automatically picks the correct charging speed and efficiently devides power between attached devices.
4. SHORT CIRCUIT PROTECTION
Breaks the circuit automatically when an overcurrent is detected. This protects the Xtorm charger and your device from short circuit damage.
5. A-CLASS BATTERY CELLS
We only use the best battery cells that provide the fast charging you need and meet all safety requirements.
6. HIGH EFFICIENCY
Our power products are built to power your device as efficient as possible. This ensures the least possible loss of energy during the charging process.
EN Warnings
Don't crop, disseme or attempt to repair the charger by yourself. Avoid exposure to water or high humidity. Don't expose to any heat source. Keep out of reach of children. Don't use in the presence of flamimabla gas. The warranty will lease in the event of limoper use. Talco Accessories has tested the product in a test environment. All statements/declarations made by Talco Accessories about the operation of the product are based on the results obtained from such tests. These results/statements/declarations cannot be guaranteed, for example in cases of deviating or injudicious use and/or use in a different environment.
NL Waarschuwingen
EU DECLARATION OF CONFORMITY
| Product Category | Product Type |
| Material Description | Material Description |
| Material Quality | Quality |
| Material Use | Material Use |
| Material Designation | Material Designation |
HIGHER QUALITY
= LOWER IMPACT
CUSTOMER SUPPORT
support@tag.nl
+31 (0)30 635 4800
TELCO ACCESSORIES GROUP
Hoofdveste 19, 3992DH Houten
The Netherlands
MOREENERGY
XTORM.EU
