XE1101 - Power bank Xtorm - Free user manual and instructions
Find the device manual for free XE1101 Xtorm in PDF.
User questions about XE1101 Xtorm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Power bank in PDF format for free! Find your manual XE1101 - Xtorm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XE1101 by Xtorm.
USER MANUAL XE1101 Xtorm
text_image
In/Output USB-C 15W USB 15W Power Button LED Power Indicator Official Xtorm Label3 CHARGING YOUR DEVICE
natural_image
Diagram showing a smartphone connected to a cable with labeled points A and B (no text or symbols beyond labels)
3A Connect the USB end of the charging cable to the USB-A output of the Power Bank and the other end to the input of your device. The charging will start automatically.
3B Charging some devices requires a charging cable other than the one supplied.
E.g. an Apple Lightning or a Micro USB cable
RECHARGING THE POWER BANK 4
natural_image
Three schematic diagrams of electronic components: a three-pin plug, a connector pin, and a resistor with labeled terminals (no text or symbols beyond basic labels)4A Connect the USB-C end of the charging cable to output 1 of the Power Bank and the USB end to a wall charger.
4B For the fastest charging possible use a 15W charger. This will fully recharge the Power Bank within 4 hours.
LED POWER INDICATOR5
IN THE BOX 6
natural_image
Technical line drawing of a device casing and its internal components (no text or symbols)5A Press the Power Button once to display the battery level remaining in the Power Bank via the LED display.
5B. Each lit LED light indicates 25% remaining energy in the Power Bank. At 4 lit lights, the Power Bank is fully charged.
text_image
XS110 Essential Power Bank USB to USB-C cable ManualEN - ENGLISH
1 SPECIFICATIONS
2 PRODUCT OVERVIEW
3 CHARGING YOUR DEVICE
3.A Connect the USB end of the charging cable to the USB-A output of the Power Bank and the other end to the input of your device. The charging will start automatically.
3.B Charging some devices requires a charging cable other than the one supplied. E.g. an Apple Lightning ^4 or a Micro USB cable.
4 RECHARGING THE POWER BANK
4.A Connect the USB-C end of the charging cable to output 1 of the Power Bank and the USB end to a wall charger.
4.B For the fastest charging possible use a 15W USB-C PD charger. This will fully recharge the Power Bank within 4 hours.
5 LED POWER INDICATOR
5.A Press the Power Button once to display the battery level remaining in the Power Bank via the LED display.
5.B Each lit LED light indicates 25% remaining energy in the Power Bank. At 4 lit lights, the Power Bank is as good as fully charged.
6 IN THE BOX
NL - NEDERLANDS
1 SPECIFICATIES
2 PRODUCT OVERZICHT
3 OPLADEN VAN JOUW APPARAAT
EN When recycling this product, please follow WEEE battery recycling procedures. Contact your local recycling organization for more information.
XTORM SAFETY CHECK WARNINGS
1. TEMPERATURE CONTROL
Provided with a temperature control chip that prevents overheating.
2. OVERLOAD PROTECTION
Protects both the internal battery as well as the battery of the attached device from overcharging.
3. SECURED POWER MANAGEMENT
Automatically picks the correct charging speed and efficiently devides power between attached devices.
4. SHORT CIRCUIT PROTECTION
Breaks the circuit automatically when an overcurrent is detected. This protects the Xtorm charger and your device from short circuit damage.
5. A-CLASS BATTERY CELLS
We only use the best battery cells that provide the fast charging you need and meet all safety requirements.
6. HIGH EFFICIENCY
Our power products are built to power your device as efficient as possible. This ensures the least possible loss of energy during the charging process.
ENWarnings
Don't crop, dissemba or attempt to repair the charger by yourself. Avoid exposure to water or high humidity. Don't expose to any heat source. Keep out of reach of children. Don't use in the presence of flammable gas. The warranty will lease in the avant of improper use. Talco Accessories has tested the product in a test environment. All statements/declarations made by Talco Accessories about the operation of the product are based on the results obtained from such tests. These results/statements/declarations cannot be guaranteed, for example in cases of deviating or injudicious use and/or use in a different environment.
NL Waarschuwingen
EU DECLARATION OF CONFORMITY
| Company Name | TOMO |
| Company Name | TOMO (H) |
| Company Name | TOMO (H) |
| Company Name | TOMO (H) |
HIGHER QUALITY
= LOWER IMPACT
CUSTOMER SUPPORT
support@tag.nl
+31 (0)30 635 4800
TELCO ACCESSORIES GROUP
Hoofdveste 19, 3992DH Houten
The Netherlands
MOREENERGY
XTORM.EU
