Onyx - Chair Prixton - Free user manual and instructions

USER MANUAL Onyx Prixton

Please read the instructions carefully before assembly, and assemble the product properly according to the instructions, don't put in use of the product before it is fully assembled. For any damage or defective, kindly contact our online after-sale service staff.

• The features and specifications of the product are subjects to changes without prior notice.
• To avoid product damage and personal injury, assemble the product properly.
• To avoid product damage and personal injury, please check the products load capacity and do not support user's whole body on the chair arms.
• To avoid personal injury, place the product on the flat ground.
• Do not stand on the product.
• To avoid personally injury, don't use the damaged product, and dispose it properly.
• Indoor use only.
• Only trained people should repair or replace the back angle adjustment component with energy accumulator contained.
• Please keep the instructions in case of further use.

INSTRUCTIONS DURING USE

• Please move the product gently to avoid collision;
• Please keep out of direct sunlight;
• Please ensure the centre of gravity is on the hydraulic until during use;
• Please watch your fingers when you adjusting the backrest angle;
• Please toggle the handle under your seat when adjusting the chair height do not to press it down roughly;
• Please lift the lever gently to raise or lower the height of the chair. Do not pull it roughly;
• Do not place and heavy objects on the chair or armrest;
• Plastic parts will split if chair is exposed to direct sunlight;
• Please do not use abrasive cleaners on the chair;

PARTS

Check and make sure you get the components on the list, contact us for any missing.

X2

M8x20

X20

M5x8

X6

X4

X2

X2

INSTALLATION STEP

STEP1

STEP3
STEP5

STEP2

STEP4
STEP6

FUNCTION

Load capacity up to 300ib
360 degree swivel adjustable backrest

Q&A

It is advised that the users check the screws and tighten them up every 6 months, for any parts missing or defective, kindly contact us and we will be glad to be helpful.

Q: How to assemble the seat base and seat? A: Find the mark "Front"

Find the back side with mark "Front", put all the base screws in potion and tight them a little, adjust the seat and seat base well, tighten all the screws.

Q: How to assemble the chair seat and the chair back? A: Put all the seat screws in position and do not tighten; put all the back screws in position and do not tighten; adjust the seat and back well and tighten all the screws.

WARNING!

Please keep the product out of reach of the children, it's not a toy!

Please be careful when unpacking, to avoid personal injury and other ricks, do not touch the handle during assembly and keep the parts out of reach of the children.

Warranty Policy

This product is guaranteed for 2 years from the date of purchase. When you have a problem that you can not solve, you must access the web www.prixton.com and click on the contact option to send us your assistance form.

These technical and electrical specifications are those of typical units and may be changed without prior notice in order to provide improved equipment.

Simplified EU Declaration of Conformity

We, La Trastienda Digital located in Avenida Cervantes 49, modulo 25, Basauri 48970, Bizkaia hereby declare that the following goods, imported and selling at European market:

BRAND	MODEL DESCRIPTION		CATEGORY
PRIXTON	ONYX	GAMING CHAIR	GAMING

Are in compliance with the EC Council Directive of 2014/53/EU (EM DIRECTIVE) and harmonized standards and with the board of the 16th of April 2014.

The complete text of the UE Declaration of conformity is available anytime at this website address: www.prixton.com

LA TRASTIENDA DIGITAL

AVERTISSEMENT

PERGUNTAS E RESPOSTAS

MERK	MODEL	BESCHRIJVING	CATEGORIES
PRIXTON	ONYX	GAMING CHAIR	GAMING