PCHSMR 3051 - Shaver ProfiCare - Free user manual and instructions

USER MANUAL PCHSMR 3051 ProfiCare

Exterior view of a modern office building (no signage)

Overview of the Components......Page 2

User manual......Page 55

Technical Specifications......Page 62

Technical diagram illustrating the assembly of a hairbrush with labeled parts and directional arrows indicating process steps.

Bedienungsanleitung

WAARSCHUWING Risico op letsels!

Thank you for choosing our product. We hope you will enjoy using the appliance.

Symbols in these Instructions for Use

Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine:

WARNING:

This warns you of dangers to your health and indicates possible injury risks.

CAUTION:

This refers to possible hazards to the machine or other objects.

NOTE:

This highlights tips and information.

General Notes

Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.

• Use the device for private and its intended purpose only. The device is not intended for commercial use.
• The power adaptor is only intended for use in dry environment.
• Ensure that the output voltage, currency and polarity of the power adaptor correspond to the nameplate specifications!
• Do not touch the power adaptor with wet hands!
• Disconnect from mains power supply if not in use, when attaching accessories, during cleaning and when malfunctioning.
• Regularly check the device and cable for signs of damage. Do not continue to operate the device in case of damage.
• Do only use original parts.
• In order to ensure your children's safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

English

Warning!

Do not allow small children to play with the foil.

There is a danger of suffocation!

Special Safety Instructions for this Ap- pliance

Warning of electrical shock:

• Keep the appliance dry!
• Keep the power adapter dry.
• Do not charge the appliance in the vicinity of bathtubs, sinks, or other vessels containing water.
• If the appliance accidentally should fall into water, disconnect the power adapter from the wall socket immediately.

Warning of electrical shock:

• Charge the appliance in a cool and dry location.
• The appliance is intended for use with safety extra-low voltage. Connect only to a power supply according to the specifications on the rating label.
• If the connection cable of this appliance has been damaged, it must be replaced with a special connection cable available from the manufacturer or its customer service.
• Do not replace any parts. Do not perform any modifications. Risk of electric shock!

Warning: Risk of injury!

• Do not use the appliance if the clipper head is damaged.
• Never remove an attachment during operation!

58 English

- This appliance may be used by children, from the age of 8 and persons with reduced physical, sensory, or mental capabilities, or persons with inadequate experience and lack of knowledge if they are supervised or have been trained and understand the hazards involved concerning the safe use of the appliance.

• Children must not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- Do not use any power adapter other than the one supplied.
- Use the hair / beard trimmer only for trimming scalp hair or whiskers.

Handling Batteries/Rechargeable Batteries

	Insert correctly!
	Do not short circuit!
	Do not disassemble!

Danger of explosion! Do not expose batteries to intense heat, such as sunlight, fire or similar.

Batteries can leak and lose battery acid. If the appliance is not used for long periods, remove the battery.

Overview of the Components

1 On/Off switch
2 Housing
3 Indicator light
4 Charging station/stand
5 Power adapter plug
6 Clipper head
7 Cutting length combs (3, 6, 9 and 12 mm)
8 Cleaning brush

Charging the Unit

• Turn the unit off. "OFF" can be seen on the switch.
• Connect the power adaptor connector with one of the following jacks.
• The socket directly at the bottom end of the unit.
• Alternatively place the unit in the charging station. The socket is at the rear.
• Plug the power adaptor into wall outlet.
• The indicator light remains red during the charging process.
• Charge the unit before first use for 9 hours.

60

English

NOTE:

• The charge indicator does not indicate the state of charge of the rechargeable battery.
• If the rechargeable battery is empty, the appliance can be operated via mains power. In order to do so, connect the mains adapter directly to the appliance. The indicator lamp lights up orange during mains operation.

• After initial use, do not charge the battery for longer than 9 hours at one time.

CAUTION:

After 9 hours always disconnect from mains power supply.

NOTE LIFEFIME RECHARGEABLE BATTERY

You can extent the lifetime of the rechargeable battery by following these steps:

• Only charge after the battery is nearly exhausted.
• Do not charge for more than 9 hours.
• Charge the unit at temperatures between 0^ and +40^ .

Hair / beard trimmer

Adjust Cutting Length

1. Turn off the device. "OFF" can be seen on the switch.
2. Attach the shaving head to the appliance as described under "Cleaning and Maintenance".
3. Select a comb attachment. Each comb is marked with its cutting length.
4. Attach the desired comb: Also refer to figure ⓑ on page 3. Slide the blades of the clipper head into the jags of the comb. Firmly push the comb onto the clipper head until it locks into place.
5. In order to remove the comb attachment, push the locking catch out of its lock.

Cut Hair / Beard

• Select the cutting length.
• Switch the appliance on. "ON" can be seen on the switch. The indicator lamp lights up green during battery operation.

NOTE:

Start by using the biggest comb attachment and cut your hair/beard step by step to the desired length.

Outlining and Shaving the Neck

• The clipper head allows precise outlining the shape of the beard, even in difficult to reach places as well as a clean shaving of the hairline at the neck.
• Turn the device off with the switch.
• Remove the cutting length comb and turn the hair clipper on again.

Finish Operation

- Switch off the appliance. "OFF" can be seen on the switch.

Cleaning and Maintenance

• Regular cleaning and maintenance ensures optimum results and long lifetime.
• Turn the unit off and disconnect from mains power supply, if necessary.

WARNING:

• Do not submerge the appliance in water for cleaning purposes.
• Disconnect the power adapter from the mains when cleaning.

CAUTION:

• Also do not clean the appliance under running water! The electronics could get damaged.
• Do not use a wire brush or other abrasives.

• Do not use sharp or abrasive cleaning agents.

• Use the cleaning brush to remove remaining hair after use.

• Remove the attachment comb.
• Clean the casing with a slightly damp cloth, if necessary.

Attach / Remove Clipper Head

The clipper head is locked to the housing. Please refer to fig. ⓐ on page 3.

62

English

1. Push back the clipper head with your thumb in order to release the catch.
2. Regularly apply 1 - 2 drops acid-free oil to the clipper head.
3. Replace the clipper head after cleaning by first setting the catch into the housing. Then press the cutting area against the housing until it locks into place.

Technical Data

Model: PC-HSM/R 3051

Net weight incl. adapter: .... approx. 0.193 kg

Power adapter

Protection class:....II

Power supply: AC 100-240 V, 50/60 Hz, 0.2 A max.

Output: DC 3.0 V, 600 mA

Rechargeable battery: 1 x 2.4 V, 600 mAh NiMH

Run time: max. 60 minutes

Charging time: 9 hours

The right to make technical and design modifications in the course of continuous product development remains reserved.

This device complies with all current CE directives, such as electromagnetic compatibility and low voltage directive and is manufactured according to the latest safety regulations.

Remove the rechargeable battery

This unit is equipped with a rechargeable Ni-MH battery.

Remove the battery before disposing of the unit.

As a consumer you are legally bound to return exhausted batteries/rechargeable batteries.

WARNING:

Disconnect from mains power supply before removing the battery!

• Remove the shaving head or the nose / ear hair trimmer attachment.
• Use a small crosshead screwdriver to remove the screws inside the appliance.
• Pry both halves of the housing apart using a screwdriver, thereby destroying the appliance.

- Remove the rechargeable battery.

Return the battery to a collection point for waste batteries or hazardous waste. Ask your municipality for further information.

Disposal

Meaning of the "Wheelie Bin" Symbol

Take care of our environment, do not dispose of electrical appliances via the household waste.

Dispose of obsolete or defective electrical appliances via municipal collection points.

Please help to avoid potential environmental and health impacts through improper waste disposal.

You contribute to recycling and other forms of utilization of old electric and electronic appliances.

Your municipality provides you with information about collecting points.

CTC Clatronic Sp. z o.o

Ul. Brzeska 1

45-960 Opole