EH513AC - Heating Vonroc - Free user manual and instructions
Find the device manual for free EH513AC Vonroc in PDF.
User questions about EH513AC Vonroc
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Heating in PDF format for free! Find your manual EH513AC - Vonroc and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EH513AC by Vonroc.
USER MANUAL EH513AC Vonroc
ELECTRIC PTC FAN HEATER EH513AC

EN Original Instructions
This product is only suitable for well insulated spaces or occasional use.
1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional safety warnings and the instructions. Failure to follow the safety warnings and the instructions may result in electric shock, fire and/or serious injury. Save the safety warnings and the instructions for future reference.
The following symbols are used in the user manual or on the product:

Read the user manual.

Denotes risk of personal injury, loss of life or damage to the tool in case of non-observation of the instructions in this manual.

Denotes risk of electrical shock.

Class II machine - Double insulation - You don't need any earthed plug.

Important! WARNING: In order to avoid overheating, do not cover the heater.

Do not dispose of the product in unsuitable containers.

The product is in accordance with the applicable safety standards in the European directives.
GENERAL SAFETYWARNINGS
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Children of less than 3 years should be kept away unless continuously supervised. Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.

CAUTION - Some parts of this product can become very hot and cause burns.
Particular attention has to be given where children and vulnerable people are present.
ADDITIONAL SAFETY WARNINGS FOR ELECTRIC HEATER
Children should be kept away unless continuously supervised to ensure that they do not play with the heater.
- Children shall not plug in, position, operate, regulate and clean the appliance or perform user maintenance.
- CAUTION-some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
- The heater is not suitable for use outdoors in damp weather, in bathrooms or in other wet or damp environments.
- Please note that the heater can become very hot and should, therefore, be placed at a safe distance from flammable object such as furniture, curtains and similar.
- Use handle when moving this heater.
- Do not move the heater when it is heated. Allow the product to thoroughly cool before handling it.
- Do not cover the heater.
- The heater must not be located immediately below a socket outlet.
- Do not connect the heater using an on/off timer or other equipment which can automatically switch the device on.
- The heater must not be placed/used in rooms where flammable liquids or gases are used or stored.
If an extension cord is used, it must be as short as possible and always be fully extended.
- You must not connect other appliances to the same mains socket as the heater.
- Do not use the heater in immediate surroundings of a bath, a shower or a swimming pool.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Make sure the heater is always under surveillance and keep children and animals away from it.
- Do not place/use the heater on moving vehicles or some where easy to be tripped over.
- When the heater is not used for a long time, unplug the heater form its means. Pull the plug straight out, never remove the plug by pulling the cord.
- Keep the heater far from curtain or places where the air inlet van easily be blocked.
- The power coupler is waterproof when not in use. In order to prevent possible electric shock or leakage current, never use the heater with wet hand or operate the heater when there is water on the power cord.
- Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliance are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

Warning! Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.

Warning! To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1 m from the air outlet.
Electrical safety
When using electric machines always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and personal injury. Read the following safety instructions and also the enclosed safety instructions.

Always check that the voltage of the power supply corresponds to the voltage on the rating plate label.
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
2. MACHINE INFORMATION
Intended use
The electrical heater is intended for indoor, non-commercial, household use for temporarily heating residential rooms. Do not use the product for any other purpose. The heater can be used in enclosed rooms in a free standing position for room heating. The heater may only be used completely mounted and standing vertically on a stable surface. It incorporates a thermostat and a self-resetting thermal cut-out to control the heating element and therefore the temperature.
TECHNICAL SPECIFICATIONS
| Model No. EH513AC | |
| Power supply 220-240 V ~/ 50 Hz | |
| Power rating 1800 W | |
| Settings Fan / 1200 W / 1800 W | |
| Temperature range 15 - 35 | °C |
| Timer 1 - 9 hour | |
| Heating capacity 20 m² | |
| Protection class Class II | |
| Length of cord 1.6 m | |
| Weight 1.6 kg | |
DESCRIPTION
The numbers in the text refer to the diagrams on page 2.
1.Heater
2. Control panel
3. Air outlet grille
4. Base
5. Tip-over switch
6. Handle
7. Main switch
8. Air inlet
9. Temperature LCD-display
10.Indicators
A. Power indicator
B. High heating indicator
C. Low heating indicator
D. Temperature indicator
E. Celsius indicator
F. Fan indicator
G. Oscillate indicator
H. Timer indicator
- Temperature lower button
- Temperature higher button
- On / off button
14.Mode button
15.Oscillation button
16.Timer button
17.Power cable
3.OPERATING

Check the device for damage before use and only use in good working condition.
When using the heater for the first time, you may notice a slight emission of smoke. This is quite normal and it stops after a short time. The heating element is made of stainless steel and was coated with protection oil by production. The smoke is caused by the left oil when heated.
Placing the electric heater
- Place the heater upright on a firm and a level surface.
- Keep a minimum distance of 1m between the front of the housing and walls, combustible materials (furniture, curtains, etc.) and 30~cm from all other housing surface areas. Keep away from wet environments.

Warning! Make sure to place the heater in a safe spot, so you cannot easily trip over the machine and cable. Make sure to place the heater where it cannot fall down / of.
Starting the electric heater (Fig. A, B)
Plug in the cable (17) to the mains.
- Turn the main switch (7) on.
The power indicator light (10A) will light up.
- Press the on/off button (13). The temperature LCD-display (9) will show the default temperature 25^ .
Adjusting the temperature
- Set the temperature as desired by using the temperature buttons (11,12). The temperature can be set between 15^ and 35^ .
-
The heater will automatically select a mode depending on the set temperature and room temperature. Press the mode button (14) to change the heating mode.
-
Low heating mode - 1200W: the low heating indicator (10C) and the temperature indicator (10D) will light up.
- High heating mode - 1800W: the high heating indicator (10B) and the temperature indicator (10D) will light up.
Fan: The temperature indicator and the LED-display will turn off. The fan indicator (10F) will light up.
Constant room temperature
The heater starts and stops automatically to keep the room temperature constant. Once the ambient temperature in the room reaches the desired target temperature, the heating element will be in standby mode. Once the ambient temperature starts to decrease, the heating element will be switched on again.
Timer button (Fig. B)
The timer can be set between 1 hour and 9 hours. The display will show the duration currently set. Press the timer button (16) to set the timer with 1 hour intervals. The timer indicator (10H) will light up. Without a timer there is no limit.
Oscillation button (Fig. B)
Press the oscillation button (15) to activate the heater to swing. The oscillate indicator (10G) will light up. Press it again to deactivate.
Tip-over switch (5) (Fig. A)
This heater has an mechanical tip-over protection. This protection ensures when the heater is not placed upright on a firm and level surface or when the heater tip over, the system will automatically shut the heater off. If this occurs, put the heater on a firm and level surface and start the heater again.
Automatic Overheat Safety Control
This heater is equipped with safety internal heat limiting thermostat and overheat protection circuit. When a potential overheat temperature is reached, the system will automatically shut the heater off. If this occurs, the heater can only resume after resetting it. To reset the heater: Unplug the heater and wait at least 30 minutes to cool down before restarting the heater.
Stopping the electric heater

Let the machine cool down before turning off by using the ventilation function.
Press the on/off button (13).
- The fan indicator flashes and the fan will cool down the heater for a few minutes.
- Turn the main switch (7) off.
Pull the plug out of the mains.
Storing the electric heater
Always let the heater cool down completely before storing the machine.
- Never wrap the cable around the heater.

Warning! Never store the machine in a wet or dusty environment
4.MAINTENANCE

Before cleaning and maintenance, always switch off the machine and remove the mains plug from the mains.
Cleaning

Let the machine cool down completely before cleaning.
- Clean the heater with a dry towel or vacuum cleaner.
- In order to protect the enclosure, don't splash water onto the heater, and never use a solvent like gasoline, isoamyl acetate, toluene, etc. to clean the heater.
- When you store the heater, let it cool down first and, keep it dry.
Trouble shooting
In case the electric heater does not work well, we give you subjoined some possible causes and their solutions.
| Problem Possible cause Treatment | ||
| The heater does not operate, even when it is plugged in and the switch, thermostat are switched on. | The plug is loose, bad connection | Pull out the plug, check the connection of the plug and socket. Then connect again. |
| No power in socket outlet | Insert the plug in a proper socket | |
| The heating element glowing | The input voltage is too high or too low | Use power supply according to the rating on the label |
| The air inlet grill is blocked | Keep the heater far away from articles like curtain, plastic bag, paper and other things which can cover the inlet or can be easily cover on the air inlet | |
| The appliance didn't heat up, only ventilator worked | The switch was not put at heating setting | Turn the switch to heat setting |
| The thermostat operated | Turn the thermostat and listen if there is open/close voice. If there is no click and the thermostat is not damaged, the heater will automatic switch on when the appliance cooled down | |
| The self-retting cut-out operated | Turn the heater off and inspect the blockage of inlet or outlet. Disconnect the plug and wait at least 10 minutes for the protection system to reset before attempting to restart the heater. | |
| Abnormal noise | The appliance is not stands upright | Put the heater on a level surface |
ENVIRONMENT

Faulty and/or discarded electrical or electronic apparatus have to be collected at the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic waste. According to the European Guideline 2012/19/EU for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly way.
WARRANTY
VONROC products are developed to the highest quality standards and are guaranteed free of defects in both materials and workmanship for the period lawfully stipulated starting from the date of original purchase. Should the product develop any failure during this period due to defective material and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this guarantee:
- Repairs and or alterations have been made or attempted to the machine by unauthorized service centers;
Normal wear and tear;
The tool has been abused, misused or improperly maintained;
Non-original spare parts have been used.
This constitutes the sole warranty made by company either expressed or implied. There are no other warranties expressed or implied which extend beyond the face thereof, herein, including the implied warranties of merchantability and fitness for a particular purpose. In no event shall VONROC be liable for any incidental or consequential damages. The dealers remedies shall be limited to repair or replacement of nonconforming units or parts.
The product and the user manual are subject to change. Specifications can be changed without further notice.
| Model identifier(s): EH513AC | |||||
| Item Symbol Value Unit Item Unit | |||||
| Heat output | Type of heat input, for electric storage local space heaters only (select one) | ||||
| Nominal heat output Pnom 1.8 kW | manual heat charge control, with integrated thermostat | No | |||
| Minimum heat output (indicative) | Pmin 1.2 kW | manual heat charge control with room and/or outdoor temperature feedback | No | ||
| Maximum continuous heat output | Pmax,c 1.8 kW | electronic heat charge control with room and/or outdoor temperature feedback | No | ||
| Auxiliary electricity consumption | fan assisted heat output No | ||||
| At nominal heat output | elmax 0 kW | Type of heat output/room temperature control (select one) | |||
| At minimum heat output | elmin | 0 kW | single stage heat output and no room temperature control | No | |
| In standby mode | eISB | 0 kW | Two or more manual stages, no room temperature control | No | |
| with mechanic thermostat room temperature control | No | ||||
| with electronic room temperature control | No | ||||
| electronic room temperature control plus day timer | Yes | ||||
| electronic room temperature control plus week timer | No | ||||
| Other control options (multiple selections possible) | |||||
| room temperature control, with presence detection | No | ||||
| room temperature control, with open window detection | No | ||||
| with distance control option | No | ||||
| with adaptive start control | No | ||||
| with working time limitation | Yes | ||||
| with black bulb sensor | No | ||||
| Contact details | VONROC • Lingenstraße 6 • 8028 PM • Zwolle • The Netherlands | ||||
ALGEMENE VEILIGHEIDSWAARSCHUWINGEN
2. INFORMATIE OVER HET APPARAAT
Bedoeld gebruik
Juxtaposing at temperatures
DECLARATION OF CONFORMITY EH513AC - ELECTRIC PTC FAN HEATER
(EN) We declare under our sole responsibility that this product is in conformity with directive 2011/65/EU of the European parliament and of the council of 8 June on the restriction of the use of certain hazardous substances in electrical and electronic equipment is in conformity and accordance with the following standards and regulations:
(DE) Der Hersteller erklärt eigenverantwortlich, dass这点es Produkt der Direktive 2011/65/EU des Europäischen Parlaments und des Rats vom 8. Juni 2011 über die Einschränkung der Anwendung von bestimmten gefährlichen Stoffen in elektrischen und elektronischen Geräten entspricht. den folgenden Standards und Vorschriften entspricht:
(NL) Wij verklaren onder once volledige verantwoordelijkheid dat dit product voldoet aan de conform Richtlijn 2011/65/EU van het Europees Parlement en de Raad van 8 Juni 2011 betreffende beperking van het gebruik van bepalde gevaarlijke stoffen in elektrische en elektronische apparatusu er in overeenstemming is met de volgende standaarden en reguleringen:
(FR) Nous déclarons sous notre seule responsabilité que ce produit est conforme aux standards et directives suivants: est conforme à la Directive 2011/65/EU du Parlement Européen et du Conseil du 8 juin 2011 concernant la limitation d'usage de certaines substances dangereuses dans l'équipement électrique et électronique.
(ES) Declaramos bajo nuestra exclusiva responsabilidad que este producto cumple con las siguientes normas y estandares de funciona: se encontrartra conforme con la Directiva 2011/65/UE del Parlamento Europeo y del Consejo de 8 de junio de 2011 sobre la restricción del uso de determinadas sustancias peligrosas en los equipos electricos y electrónicos.
(IT) Dichiariamo, sotto la nostra responsabilità, che questo prodotto è conforme alle normative e ai regolamenti seguenti: è conforme alla Direttiva 2011/65/UE del Parlamento Europeo e del Consiglio dell'8 giugno 2011 sulla limitazione dell'uso di determinate sostanze pericolose nelle apparecchiature elettriche ed elettroniche.
(SV) Vi garanterar pa eget ansvar att denna produkt upp fyller och foljer foljande standarder och bestammelser: uppyller direktiv 2011/65/EU fran Europeiska parliamentet och EG-radet fran den 8 Juni 2011 om begrangsningen av användning av farliga substanser i elektrisk och elektronisk utrustning.
(DA) Vi erklærer under eget ansvar, at dette produit er i overensstemmelse med falgende standarder og bestemmelser: er i overensstemmelse med direktiv 2011/65/ EU fra Europa-Parlamentet og Rådet af 8. Juni 2011 om begraensing af anvendelsen af visse farlige stoffer i elektrisk og elektronisk udstyr.
(PL) Deklarujemy na wlasna odpowiedzialnosc, ze ten produkt spelnia wymogi zawarte w nastepujacych normach i przypesach: jest zgodny z Dyrektywa 2011/65/UE Parliamentu Europejskiego i Rady z dnia 8 czerwca 2011 r. w sprawie agraniczenia stosowania niedtorych niebepeznych substantcjiw sprzechec elektrycznym i elektronicznym.
(RO) Declaram prin aceasta cu raspunderea deplina cà produsul acesta este in conformitate cu urmatoarele standarde sa directive: este in conformitate cu Directiva 2011/65/UE a Parliamentului Europeano si a Consiliului din 8 iunie 2011 cu privire la interizcerea utilizarii anumitor substanțe periculoase la echipamentele electrice si electronice.
(PT) Declaramos por{nossa total responsabilida-de que este produits esta em conformidade e cumpre as normas e regulamentacoes que se seguem: está em conformidade com a Direactiva 2011/65/EU do Parlamento Europeu e com o Conselho de 8 de Junho de 2011 no que respeita a restricao de uso/a determinadas substancias perigosas existentes em equipamento eletrico e electronomic.
(HU) Kizárólagos felelosségunk tudataban kijelentjuk, hogy a termek megfelel az Europai Parliamentnek és a Tanácsnak az egyes vesélyes anyagok elektromos és elektronikus berendezesekben való alkalmazásának korlátozásárol szólo 2011/65/EU irányelvenek (június 8.), valamint a következő szabványoknek és jegszabályoknek:
(CS) Prohlasujeme na svou výhradni odpovědnost, ze tento vyrobek splnjupe požadavy směrnice 2011/65/EU Evropské rady a parlamentu ze dne 8. Června, ktera se týká omezení používani určitych nebezpečnéch látek v elektrických a elektronických zařizenich, a splnjupe také všechny požadavy následujících norem a předpisù:
EN 60335-1, EN 60335-2-30, EN 62233, 2014/35/EU, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3, 2014/30/EU, 2011/65/EU, 2012/19/EU
Zwolle, 01-08-2022H.G.FRosberg

CEO
VONROC · Lingenstraße 6 · 8028 PM Zwolle · The Netherlands

VONROC
BUILD YOUR FUTURE
©2022 VONROC
WWW.VONROC.COM
2208-15