Hypervolt 2 - Massage device HyperIce - Free user manual and instructions

Product type	Portable percussion massage device
Brand	HyperIce
Model	Hypervolt 2
Weight	0.82 kg (1.8 lbs)
Power supply	18 V DC charger, 100-240 V AC, 50/60 Hz, 0.7 A
Percussion frequencies	Level 1: 2000 perc/min (33 Hz) Level 2: 2350 perc/min (40 Hz) Level 3: 2700 perc/min (45 Hz)
Number of speeds	3
Included massage heads	5 interchangeable heads (including a fork-shaped head)
Battery life	Approximately 2 hours or more (depending on speed and pressure applied)
Full charge time	Up to 4 hours
Charge indicator	LED light strip (red to green)
Bluetooth connection	Yes, for the Hyperice app
Pressure sensor	Yes, with visual indicator
Recommended use	On soft tissues, maximum 60 seconds per area, avoid bones, head, and sensitive areas
Cleaning	Clean, damp cloth, device unplugged and turned off
Storage	Clean, cool, dry place, away from direct sunlight
Warranty	2 years against manufacturing defects
Manufacturing	Designed in the United States, assembled in China
Contraindications	Pregnancy, complicated diabetes, pacemaker, recent surgery, epilepsy, herniated disc, etc. Consult a doctor

Frequently Asked Questions - Hypervolt 2 HyperIce

How to turn on and adjust the speed of the Hypervolt 2?

Press the power/speed adjustment button for three seconds to turn on the device. Once on, press briefly to cycle through speeds 1 to 3. The LED indicators show the current speed.

How long does the battery last and how to charge it?

Battery life is about 2 hours or more depending on usage. To charge, use the included 18 V charger: plug it into the charging port at the bottom of the handle and into a wall outlet. Full charge takes up to 4 hours. The LED blinks during charging and turns solid green when the battery is full.

How to change the massage heads?

Make sure the device is turned off and the head has stopped. Pull the current head outward to remove it. Insert the new head and press firmly. For the fork-shaped head, align the tab with the groove of the opening before pushing.

What are the contraindications for use?

The Hypervolt 2 should not be used without medical advice in case of pregnancy, diabetes with complications, pacemaker, recent surgery or injury, epilepsy, migraines, herniated disc, spondylolisthesis, recent joint replacement, or presence of an intrauterine device. Always consult your doctor if in doubt.

How to clean and maintain the device?

Unplug the device and make sure it is turned off. Use a clean, damp cloth to gently wipe the Hypervolt 2. Do not immerse it or let liquid enter openings. Store it in a clean, cool, dry place away from sunlight.

What is the warranty for the Hypervolt 2?

The device has a 2-year warranty against defects in materials or workmanship. The warranty does not cover accidental damage, misuse, unauthorized repairs, or failure to follow maintenance instructions. Keep your proof of purchase.

How to connect the device to the Hyperice app?

Turn on the Hypervolt 2, enable Bluetooth on your phone, and open the Hyperice app. Select a program, then tap 'Scan for Devices'. Choose your device when it appears. The HyperSmart function automatically adjusts speed and intensity according to the program.

What are the risks and safety precautions?

Never use the device under a blanket, in water, or outdoors. Avoid blocking air openings. Do not use it continuously for more than one hour; let it cool for 30 minutes. Do not use on irritated skin or bruises. Keep hair, fingers, and clothing away from moving parts. Unplug it after use.

Can I use the Hypervolt 2 on any part of the body?

No, the device is designed for soft tissues only. Do not use on bones, head, face, neck, spine, or any hard area. Apply light pressure and do not exceed 60 seconds per area. Stop immediately if pain occurs.

Is the device suitable for children or the elderly?

The Hypervolt 2 can be used by children aged 8 and above and by persons with reduced capabilities, under supervision and after understanding the safety instructions. Fragile individuals must be accompanied by an adult. Consult a doctor for elderly persons or those with health issues.

USER MANUAL Hypervolt 2 HyperIce

TO REDUCE RISKS OF ELECTRIC SHOCK, FIRE, AND PERSONAL INJURY, OR PROPERTY DAMAGE, THIS DEVICE MUST BE USED IN ACCORDANCE WITH THE FOLLOWING WARNINGS, CAUTIONS, AND SAFETY INSTRUCTIONS.

IMPORTANT SAFETY INSTRUCTIONS - ORIGINAL INSTRUCTIONS

Read all instructions before using the Hypervolt 2.

DANGER

To reduce the risk of electric shock:

• Always unplug this device from the electrical outlet immediately after using and before cleaning.
• Do not reach for a device that has fallen into water. Unplug immediately.
• Do not use while bathing or in a shower.
• Do not place or store device where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.

WARNING

To reduce the risk of burns, fire, electric shock, or injury to persons:

- A device should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts.

- Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons.

- This device can be used by children aged from 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

- Use this device only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.

- Never operate this device if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or if it has gotten wet. Return the device to a service center for examination and repair.

- Do not carry this device by supply cord or use cord as a handle.

- Keep the cord away from heated surfaces.

- Never operate the device with the air openings blocked. Keep the air openings free of lint, hair, or any substance which may impair the flow of air.

- Never drop or insert any object into any opening.

- Do not use outdoors.

- Do not operate where aerosol (spray) devices are being used or where oxygen is being administered.

• Never operate on a soft surface such as a bed or couch where the air openings may be blocked.
• Do not use device in close proximity to loose clothing or jewelry.
• Keep long hair away from device while in use.
• Cleaning and user maintenance shall not be done by children without supervision.
• Do not remove screws or attempt to disassemble.
• Do not operate continuously for more than one hour. After one hour use, allow device to rest for 30 minutes before re-using.
• Unplug the device after charging and prior to use.
• Use device only according to Operating Instructions.
• When using the Hypervolt 2 use only on dry, clean surfaces of the body by lightly pressing and moving across the body for approximately sixty(60) seconds per region. The Hypervolt 2 should only be used on soft tissue areas of the body and should not be used on any hard or bony areas of the body, including the head. Please immediately stop use of the Hypervolt 2 upon experiencing any pain or discomfort, apart from light muscle soreness. Bruising can occur from use of the Hypervolt 2, regardless of the pressure setting, and if bruising does occur you should not use the Hypervolt 2 on the bruised area until the bruise is fully healed. Use of the Hypervolt 2 should also be avoided on all bruises, contusions, rashes or irritated or injured areas of the skin until they are fully healed. When using the Hypervolt 2 be sure to keep fingers, toes, hair, and other body parts away from the back of the attachment head to avoid pinching or hair entanglement.

The Hypervolt 2 should only be charged with the double insulated, 18VDC Hyperice charger (model number MX24Z2-1801000) that was supplied with the device. Do not charge the Hypervolt 2 overnight or leave the Hypervolt 2 unattended when charging or in use.

Please do not use the Hypervolt 2, or any percussion device without first obtaining approval from your physician if any of the following apply:

- Pregnancy, diabetes with complications such as neuropathy or retinal damage, wear of pacemakers, recent surgery or injury, epilepsy or migraines, herniated disks, spondylolisthesis, spondylolysis, or spondylosis, recent joint replacements or IUD, metal pins or plates or any concerns about your physical health. Frail individuals and children should be accompanied by an adult when using any percussion or vibration device. These contraindications do not mean that you are not able to use a percussion or vibration device but we advise that before doing so you consult your physician. Ongoing research is being done on the effects of percussion massage for specific medical disorders that may result in the shortening of the list of contraindications as shown above.

The Hypervolt 2 contains a battery which must be complied with safely at an appropriate e-waste disposal or recycling facility.

CAUTION

The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, heat above 100^ C or incinerate. Dispose of used battery promptly. Keep away from children. Do not disassemble and do not dispose of in fire.

SAVE THESE INSTRUCTIONS

The Hypervolt 2 is a handheld percussion massage device that delivers targeted pulses of pressure to care for muscles, relieve tension, provide a relaxing massage, accelerate warmup and recovery, and help maintain flexibility and range of motion.

Operating

Turn your Hypervolt 2 ON by pressing the power/speed setting button for three seconds. Once your device is powered ON the battery level indicator (LED band) at the base of the handle will illuminate. Press the power/speed setting button again to select speed one. Your Hypervolt 2 is now ready for use. Change speeds (1-3) by pressing the power/speed setting button once per speed. The lights will indicate the current speed.

Changing head attachments

Only change attachments after speed setting is turned to off and head attachment stopped moving. To change head attachments, pull the existing head attachment straight out to remove and insert the desired head directly into the opening while pushing firmly. For the Fork head attachment align the tab on the fork with the groove on the opening and push firmly.

Charging

Fully charge battery for up to four hours before first use. To charge, connect the DC end of the supplied 18V charger to the charging port on the bottom of the handle and plug the charger into a wall outlet. The LED light band will pulsate to show battery level and indicate active charging. The LED light band colors correspond to the charge level ranging from red (low) to green (fully charged). Full charge is indicated when the LED band remains green and fully illuminated. Battery may be recharged at any time and at any battery level. It is not recommended to fully deplete the battery to the red LED level. The average runtime is 2+ hours depending on speed level and pressure applied during use.

Cleaning and storage

Make sure the power is OFF and the battery charger is not attached. Use a damp, clean, cloth and gently wipe your Hypervolt 2. Store in a clean, cool, dry place, out of direct sunlight, when not in use.

Connecting to the Hyperice App

To connect your device to the Hyperice App via Bluetooth® make sure that your device is turned on, Bluetooth® is turned on in your phone, and your device is within close proximity. Select a routine within the Hyperice App and if prompted tap “Scan for Devices.” Select your device when it pops up on the screen. HyperSmart™ will automatically start your device and adjust the speed and intensity as you follow along with the routine.

5 1 2 3 4 button icators on indicator d attachments (5) or (LED band) 6 7

Specifications

1. Speed indicators (3)
2. Power/speed setting button
3. Pressure sensor indicators
4. Bluetooth ^® connection indicator
5. Interchangeable head attachments (5)
6. Battery level indicator (LED band)
7. Charging port

AC-DC Charger: 100-240V - 50/60Hz 0.7A - 18.0V 1.0A 18.0 W

Rechargeable lithium ion battery 2500mAh

Frequency: Level 1 - 2000/33 Hz, Level 2 - 2350/40 Hz, Level 3 - 2700/45 Hz

Weight: 1.8 lbs/0.82 kg

Designed in USA. Assembled in China.

WARRANTY

If within two years from the date of purchase, this device fails due to a defect in material or workmanship, Hyperice, Inc. will repair or replace the device, or necessary components, free of charge.

This warranty excludes:

(a) damage caused by accident, abuse, mishandling, or transport;
(b) devices subjected to unauthorized repair;
(c) devices not used in accordance with Hyperice care instructions;
(d) damage exceeding the cost of the device;
(e) deterioration of the delivered device resulting from abnormal storage and/or safeguarding conditions on the client's premises, and
(f) failure to provide the dated proof of purchase.

Some states and countries do not allow a limitation of damages, so the foregoing limitation may not apply to you. This warranty guarantees specific legal rights, and but other rights may vary from country to country and from state to state. This warranty service is available through the operating policies and procedures of Hyperice, Inc., and all Hyperice international distributors. If you are a client, please contact the appropriate Hyperice business entity, dealer, or retailer, from whom you directly purchased the device for warranty and return authorization procedures. This warranty is initiated and executed by Hyperice, Inc.

FR

AFIN DE RÉDUIRE LE RISQUE DE CHOC ÉLECTRIQUE, D'INCENDIE, DE DOMMAGES CORPORELS OU MATÉRIELS, CET APPAREIL DOIT ÊTRE UTILISÉ CONFORMÉMENT AUX AVERTISSEMENTS, MISES EN GARDE ET CONSIGNES DE SÉCURITÉ SUIVANTS.

CONSIGNES DE SÉCURITÉ IMPORTANTES - INSTRUCTIONS D'ORIGINE

Batterie lithium-ion rechargeable : 2500 mAh

TYTO POKYNY DOBŘE USCHOVEJTE

Nabiječka: 100–240 V – 50/60 Hz 0,7 A – 18,0 V 1,0 A 18,0 W

UDSKIFTNING AF HOVEDTILBEH∅R

OLULISED OHUTUSJUHISED - ALGSED JUHISED

Sagedus: tase 1 – 2000/33, tase 2 – 2350/40, tase 3 – 2700/45 tase

Kaal: 0,82 kg (1,8 naela)

Disainitud USA-s. Seade on kokku pandud Hiinas.

GARANTII

Caricabatterie CA-CC: 100-240 V - 50/60 Hz 0,7 A - 18,0 V 1,0 A 18,0 W

Zasilacz AC-DC: 100–240 V - 50/60 Hz 0,7 A - 18,0 V 1,0 A 18,0 W

AC-DC-laddare: 100-240 V - 50/60 Hz 0,7 A - 18,0 V 1,0 A 18,0 W

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Hyperice, Inc., 525 Technology Drive, Suite 100, Irvine, California 92618 USA

Copyright 2021 © Hyperice, Inc. All rights reserved.

170-00045 Rev 3