CC 50 Cosy - Heated blanket BEURER - Free user manual and instructions

Product type	Heating blanket / 2-in-1 heating cape
Brand	Beurer
Model	CC 50 Cosy
Number of temperature levels	6 (1 to 6, plus off 0)
Automatic shut-off	Yes, after 3 hours
Rapid heating	Yes, by setting to maximum level
Safety system	Electronic overheating protection sensor, irreversible automatic shut-off in case of fault
Usage	Warming the human body, can be worn as a cape with snap button closure
Users	Adults and children from 8 years old (supervision required)
Care	Machine washable at 30°C (wool cycle), max 5 times
Dry cleaning	Prohibited
Bleaching	Prohibited
Ironing	Prohibited
Machine drying	Prohibited
Color	Not specified (usually gray/beige)
Power supply	220-240 V ~ 50/60 Hz (estimated)
Warranty	3 years
Certification	OEKO-TEX® Standard 100

Frequently Asked Questions - CC 50 Cosy BEURER

How to use the CC 50 Cosy heating blanket?

First plug the switch into the blanket, then into the mains socket. Slide the switch to a temperature level (1 to 6). The indicator light turns on. To turn off, set the switch to 0. The blanket stops automatically after 3 hours.

Can I machine wash this blanket?

Yes, the blanket is machine washable on a delicate cycle at 30°C (wool cycle). Use a gentle detergent. Do not wash more than 5 times during its lifetime. Do not bleach, do not tumble dry, do not iron.

What is the automatic shut-off duration?

The CC 50 Cosy heating blanket shuts off automatically after 3 hours. The indicator light then flashes. To turn it back on, set the switch to 0 for 5 seconds, then adjust again.

Can I use this blanket if I have a pacemaker?

The electromagnetic fields are below the limits (5,000 V/m, 80 A/m, 0.1 mT). However, consult your doctor and the pacemaker manufacturer before use.

From what age can a child use it?

Children from 0 to 3 years should not use this blanket. From 3 to 8 years, only under parental supervision. From 8 years old, they can use it if they have been informed of the risks and are supervised.

What if the blanket no longer heats?

Check that the switch is properly connected and the socket works. If the indicator light does not turn on despite a setting, the safety system may have irreversibly deactivated the blanket. Contact customer service.

Can I use the heating blanket folded?

No, never use the heating blanket folded or wrinkled. This can cause overheating and fire. Always use it flat.

How to store the blanket?

Let it cool down, unplug the switch, then store it in its original packaging. Avoid placing objects on top to prevent excessive folding.

What to do in case of safety system failure?

The safety system triggers an irreversible shutdown. You can no longer use the blanket. Send it with the switch to customer service. Do not plug a defective blanket into another switch.

Can I use this blanket as a cape?

Yes, the CC 50 model can be worn as a heating cape. Close the snap buttons on the front and on the arms for a better fit. Wear the dark side against the body.

USER MANUAL CC 50 Cosy BEURER

Black-and-white photo of a smiling woman in a coat holding a medical device, with a small inset image showing a leaf-shaped patch (no text or symbols)

EN Heated Cosy Cape Heated Overblanket Instruction for Use....10

FR Cape chauffante Couverture chauffante Mode d'emploi....17

Medical diagram showing a device with labeled parts including a catheter, tubing, and a medical device with numbered parts.

Black-and-white photo of a person sitting on a couch, holding an open book (no visible text or symbols)

4. Bedienung

4.1 Sicherheit

ACHTUNG

Diagram showing a mechanical component with an inset close-up of its internal structure (no text or symbols)

4.3 Einschalten

1. Items included in the package .... 11

1.1 Description ...... 11

1. Important instructions

Retain for future use ....11

1. Intended use 13

2. Operation ...... 13

4.1 Safety 13

4.2 Initial use 13

4.3 Switching on 13

4.4 Setting the temperature .....13

4.5 Switching off 14

4.6 Automatic switch-off 14

1. Cleaning and maintenance ....14

2. Storage 15

3. Disposal 15

4. What if there are problems? 15

5. Technical data 15

6. Warranty Conditions 15

Explanation of symbols

	Read the instructions!		Machine-washable on an extra-delicate cycle at 30°C
			Do not bleach
	Do not insert pins! Do not tvmble dry
	Do not use folded or rucked!		Do not dry-clean
	Not to be used by very young children (0 - 3 years).	OEKO-TEX® CONFIDENCE IN TEXTILES STANDARD 100 SPARTIN AROUN 06.0.43510 HohenSTEIN HTTI Tested for harmful substance, www.polo-fos.com/standard190	The textiles used for this device meet the stringent human eco-logical requirements of Oeko-Tex Standard 100, as verified by Hohenstein Research Institute.
PAP	Dispose of packaging in an environmentally friendly manner.
	WARNING: Warning of risks of injury or health hazards
	CAUTION: Safety information about possible damage to appliance/accessories.

NOTE: Important information.

1. Items included in the package

1 Electric cape/Thermal Overblanket
1 Controller
1 Instructions for use

1.1 Description

1. Mains plug
2. Mains cable
3. Controller
4. Indicator lamp
5. Sliding switch for ON/OFF and temperature settings
6. Plug-in coupling

ge 4 1 2 3 5 6

Please note: The CC 50 can be used as either an electric overblanket or an electric cape. The term "electric overblanket" is used in the following instructions for use to refer to both uses. The instructions apply equally to the use as an electric cape.

2. Important instructions Retain for future use

WARNING

• Non-observance of the following instructions may result in personal injury or material damage (electric shock, skin burns, fire). The following safety and hazard information is not only intended to protect your health and the health of others, it should also protect the product. For this reason, pay attention to these safety notes and include these instructions for use when handing over the product to others.
• This electric overblanket may not be used by people with reduced sensitivity to heat or by other very vulnerable people as they are unable to respond to overheating (e.g. diabetics, persons with skin changes related to illness or persons with scarred skin in the area where the pad is to be applied, after taking any pain-relieving medication or alcohol).
• This electric overblanket may not be used by very young children (0-3 years old) as they are unable to respond to overheating.
• This electric overblanket may not be used by young children (3-8 years old) unless the controller has been set by a parent or responsible adult and the child has been given adequate instructions on how to use the electric overblanket safely.

- This electric overblanket may be used by children over the age of 8 and by people with reduced physical, sensory or mental skills or a lack of experience or knowledge, provided that they are supervised or have been instructed on how to use the electric overblanket safely, and are fully aware of the consequent risks of use.

- Children must not play with the electric overblanket.

- Cleaning and user maintenance must not be performed by children unless supervised.

- This electric overblanket is not designed for use in hospitals.

- Do not insert needles.

- Do not use when folded or bunched up.

- Do not use if wet.

- This electric overblanket may only be used in conjunction with the controller specified on the label.

- The electrical and magnetic fields emitted by this electric overblanket may interfere with the function of a pacemaker. However, they are still well within the limits: electrical field strength: max. 5000 V/m, magnetic field strength: max. 80 A/m, magnetic flux density: max. 0.1 millitesla. Please consult your doctor and the manufacturer of your pacemaker before using this electric overblanket.

- When this electric overblanket is switched on

- do not place any objects on it (e.g. suitcase or washing basket)

- Heat sources, such as hot water bottles, heating pads or similar, must not be placed on the pad.

- The electronic components in the controller warm up when the electric overblanket is in use.

For this reason, the controller must never be covered or placed on the electric overblanket when it is in use.

- Do not pull, twist or make sharp bends in the cables.

- Please check this electric overblanket frequently for signs of wear and tear or damage.

If any such signs are evident, if the electric overblanket has been used incorrectly or if it no longer heats up, it must be checked by the manufacturer before being switched on again.

- If the mains cable of the electric overbanket is damaged, it must be replaced by the manufacturer, its customer service department or a similarly qualified person to avoid any risk.

- Always observe the notes on operation (section 4), cleaning and maintenance (section 5) and storage (section 6).

- If you should have any questions about using our devices, please contact Customer Services.

3. Intended use

CAUTION

This electric overblanket is only designed to warm up the human body.

The electric overblanket is shaped so that it can be worn as a cape. The dark surface of the overblanket/cape must face towards the body. The electric cape can be closed using poppers at the front. There are also further poppers in the area of each arm to ensure a better fit to the body (see image).

4. Operation

4.1 Safety

CAUTION

Black-and-white photo of a person sitting on a sofa, holding an object (no visible text or symbols)

The electric overblanket is fitted with the SAFETY SYSTEM. This electronic sensor technology provides protection against overheating across the entire surface of the electric overblanket with an automatic switch-off if there is a fault.

Please note that, for safety reasons, the electric overblanket can no longer be operated after a fault has occurred and must be sent to the specified service address.

Do not connect the defective heated overblanket with another controller of the same type. This would trigger a permanent switch-off via the controller safety system.

4.2 Initial use

• First, connect the controller to the electric overblanket by inserting the plug-in coupling.
• Then plug the mains plug into the socket.

Technical line drawing of a mechanical component with an inset showing a magnified view of its internal structure (no text or symbols)

4.3 Switching on

To switch the electric overblanket on, set the sliding switch for ON/OFF and temperature settings to setting 1, 2, 3, 4, 5 or 6.

When it is switched on, the indicator lamp (4) lights up.

4.4 Setting the temperature

Level 0: OFF

Level 1: minimum heat

Setting 2 - 5: individual heat setting

Level 6: maximum heat

WARNING

If the electric overblanket is being used over several hours, we recommend that you set the lowest temperature setting on the controller to avoid overheating the person using the blanket.

NOTE

The fastest way to warm up the electric overblanket is to initially set the highest temperature setting.

4.5 Switching off

To switch off the electric overblanket, slide the sliding switch for ON/OFF and temperature settings to the OFF (0) position.

NOTE

If the electric overblanket is not being used for several days, slide the sliding switch for ON/OFF and temperature settings to the OFF (0) position and remove the mains plug from the socket.

Then disconnect the controller from the electric overblanket by unplugging the plug-in coupling.

4.6 Automatic switch-off

This electric overblanket switches off automatically after 3 hours. Once the electric overblanket has switched off, it is no longer heated and the indicator lamp flashes.

To switch on the electric overblanket again, first set the sliding switch for ON/OFF and temperature settings to the OFF (0) position for 5 seconds. After about 5 seconds it is possible to switch it on again.

5. Cleaning and maintenance

WARNING

Before cleaning, always remove the mains plug from the socket first. Then disconnect the controller from the electric overblanket by unplugging the plug-in coupling. Otherwise there is a risk of electric shock.

CAUTION

- The controller must never come into contact with water or other liquids, as this may cause damage.

To clean the controller, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents.

Small marks on the electric overblanket can be removed with a damp cloth or sponge and, if necessary, with a little liquid detergent for delicate laundry.

CAUTION

- Please note that the electric overblanket may not be chemically cleaned, wrung out, tumble dried, put through a mangle or ironed.

Set the washing machine to a particularly gentle wash cycle at 30^ C (wool cycle).

Use a delicate laundry detergent and measure it out according to the manufacturer's instructions.

CAUTION

- Please note that frequent washing of the electric overblanket has a negative effect on the product.

The electric overblanket should therefore be washed in a washing machine a maximum of 5 times during its life. Immediately after washing, reshape the electric overblanket to its original dimensions while it is still wet and spread it out flat over a clothes horse to dry.

CAUTION

- Do not use pegs or similar items to attach the electric overblanket to the clothes horse. Failure to do so may damage the electric overblanket.

- Do not reconnect the controller to the electric overblanket until the plug-in connector and electric overblanket are completely dry. Failure to do so may damage the electric overblanket.

WARNING

- Never switch the electric overblanket on to dry it! Otherwise there is a risk of electric shock.

6. Storage

If you do not plan to use the electric overblanket for a long period of time, we recommend that you store it in the original packaging. For this purpose, disconnect the controller from the electric overblanket by unplugging the plug-in coupling.

CAUTION

Allow the electric overblanket to cool down before folding. Otherwise the electric overblanket may be damaged. Do not crease the electric overblanket by placing items on top of it during storage.

7. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please contact the local authorities responsible for waste disposal.

8. What if there are problems?

Problem Cause Solution
The indicator lamp is not illuminated while- the controller is properly connected to the electric overblanket- the mains plug is connected to a working socket- the sliding switch for ON/OFF and temperature settings is set to 1, 2, 3, 4, 5 or 6	The safety system has switched the electric overblanket off permanently.	Send the electric overblanket and the controller for servicing.

9. Technical data

See the type plate label on the electric overblanket.

10. Warranty conditions

Beurer GmbH, Söflinger Straße 218, 89077 Ulm, Germany (hereinafter referred to as “Beurer”) provides a warranty for this product, subject to the requirements below and to the extent described as follows.

The warranty conditions below shall not affect the seller's statutory warranty obligations which ensue from the sales agreement with the buyer.

The warranty shall apply without prejudice to any mandatory statutory provisions on liability.

Beurer guarantees the perfect functionality and completeness of this product.

The worldwide warranty period is 3 years, commencing from the purchase of the new, unused product from the seller.

The warranty only applies to products purchased by the buyer as a consumer and used exclusively for personal purposes in the context of domestic use.

German law shall apply.

During the warranty period, should this product prove to be incomplete or defective in functionality in accordance with the following provisions, Beurer shall carry out a repair or a replacement delivery free of charge, in accordance with these warranty conditions.

If the buyer wishes to make a warranty claim, they should approach their local retailer in the first instance: see the attached “International Service” list of service addresses.

The buyer will then receive further information about the processing of the warranty claim, e.g. where they can send the product and what documentation is required.

A warranty claim shall only be considered if the buyer can provide Beurer, or an authorised Beurer partner, with

• a copy of the invoice/purchase receipt, and
• the original product.

The following are explicitly excluded from this warranty:

• deterioration due to normal use or consumption of the product;
• accessories supplied with this product which are worn out or used up through proper use (e.g. batteries, rechargeable batteries, cuffs, seals, electrodes, light sources, attachments and nebuliser accessories);
• products that are used, cleaned, stored or maintained improperly and/or contrary to the provisions of the instructions for use, as well as products that have been opened, repaired or modified by the buyer or by a service centre not authorised by Beurer;
• damage that arises during transport between manufacturer and customer, or between service centre and customer;
• products purchased as seconds or as used goods;
• consequential damage arising from a fault in this product (however, in this case, claims may exist arising from product liability or other compulsory statutory liability provisions).

Repairs or an exchange in full do not extend the warranty period under any circumstances.

FRANÇAIS

Sommaire

Medical diagram of a catheter device with labeled parts including an applicator and a catheter, showing anatomical positioning.

Black-and-white photo of a person sitting and holding an object, no visible text or symbols

4. Utilisation

4.1 Sécurité

ATTENTION

Diagram showing a mechanical component with an inset close-up of its internal structure (no text or symbols)

Diagram of a medical device with numbered parts and labeled parts, including a plug, tubing, and connector.

Black-and-white photo of a person sitting on a sofa, holding an object (no visible text or symbols)

Technical line drawing of a mechanical component with an inset showing a close-up view of a cylindrical component (no text or symbols)

4.3 Encender

Diagram of a medical device with numbered parts and labeled parts, including a magnified inset showing internal components.

Black-and-white photo of a person sitting on a sofa, holding an object with a pen (no visible text or symbols)

4. Funzionamento

4.1 Sicurezza

ATTENZIONE

Diagram showing a mechanical component with an inset close-up of its internal structure (no text or symbols)

4.3Accensione

Diagram of a medical device with numbered parts and labeled parts, including a magnified inset showing internal components.

Black-and-white photo of a person sitting on a sofa, holding an object (no visible text or symbols)

Diagram showing a mechanical component with an inset close-up of its internal structure (no text or symbols)

4.3Açma

Diagram of a medical device with numbered parts and labeled parts, including a magnified inset showing internal components.

Black-and-white photo of a person sitting and reading a book (no visible text or symbols)

4. Применение

4.1 Безопасность

ВНИМАНИЕ

Diagram showing a mechanical component with an inset close-up of its internal structure (no text or symbols)

4.3 Включение

Diagram of a medical device with numbered parts and labeled parts, including a magnified inset showing internal components.

Black-and-white photo of a person sitting on a sofa, holding an open book (no visible text or symbols)

4. Obsługa

4.1 Bezpieczeństwo

UWAGA

Diagram showing a mechanical component with a circular end and an inset close-up of its internal structure (no text or symbols)

4.3 Włączanie