IAN 277836 - Sports protection CRIVIT - Free user manual and instructions

Product type	Sports protections (knee pads, elbow pads, hand guards) for skate and roller
Brand	CRIVIT
Model	IAN 277836
Safety standard	EN 14120:2003 + A1:2007, Level 1 (normal use), Range A or B
Available sizes	S/M (3-7 years, 100-130 cm) and L/XL (8-12 years, 130-160 cm)
Outer materials	Nylon and polyester
Protective shells	Polypropylene
Padding	EVA foam, nylon, polyester
Closures	Velcro straps (self-adhesive)
Weight	Approximately 300-500 g per set (estimate)
Power supply	None (passive protections)
Main functions	Absorb shocks and protect knees, elbows, and palms while skateboarding/rollerblading
Cleaning	Hand wash with warm water and mild detergent, rinse with clear water. Do not machine wash, do not tumble dry, do not iron
Maintenance	Check before each use for cracks or deformations. Clean Velcro if adhesion decreases
Storage	Away from direct sunlight and high temperatures
Warranty	3 years from purchase date, covering manufacturing defects
Spare parts and repairability	Not specified – in case of damage, replace the set
Package contents	Pair of knee pads, pair of elbow pads, pair of hand guards
Manufacturer	I.S.M. Import Service Management GmbH, Rathenaustr. 4, D-51427 Bergisch Gladbach, Germany
Year of manufacture	2016

Frequently Asked Questions - IAN 277836 CRIVIT

What is the protection level of these protections?

These protections are certified EN 14120 Level 1, suitable for normal wheeled sports (skate, roller). They are not suitable for acrobatic practices (Level 2).

How to choose the right size?

The set is available in two sizes: S/M for children aged 3 to 7 years (100-130 cm) and L/XL for 8 to 12 years (130-160 cm). Make sure the shells cover knees and elbows properly.

How to properly put on knee pads and elbow pads?

Open the Velcro, position the protection so that the shell fully covers the knee or elbow, then fasten the elastic straps around the limb. Tighten firmly without restricting blood circulation.

How to put on hand guards?

Insert the thumb into the opening, with the palm resting on the padding. Pass the strap numbered 2 through the loop and fasten it to Velcro 1. Then wrap the strap around the wrist and fasten it. The safety plate should be under the palm.

Can these protections be machine washed?

No, machine washing is prohibited. Clean them by hand with warm water and a mild detergent, then rinse with clear water. Do not use solvents, tumble dry, or iron.

What to do if the protections are damaged?

If you notice cracks, tears, or detached parts, stop using them immediately. They no longer protect effectively. Replace them with a new product.

Are the protections suitable for cycling?

They are designed for skateboarding and rollerblading. Their EN 14120 certification is not specific to cycling. Use them at your own risk for other activities.

How to maintain the Velcro closures?

Keep the Velcro clean and free of lint. If adhesion decreases, you can brush them or replace them if necessary.

What is the lifespan of these protections?

With proper maintenance and in the absence of major impact, they can last several seasons. Regularly check the condition of the shells and padding.

How to claim the warranty?

In case of defect, contact customer service (see manual) with the receipt. You can return the defective product free of charge. The legal 2-year warranty applies, with a commercial 3-year warranty offered by the manufacturer.

USER MANUAL IAN 277836 CRIVIT

PROTECTIONS ENFANT PROTECTIONS EI

Mode d'emploi

DE AT CH

KINDERHRODEEKTORENPRETSEKTOREN

1 (GB) Instruction manual 3
2 Protectors for normal roller-skating 3
3 Putting on t-e knee and elbow pads 3
4 Putting on the palm/-and pads 3
5 Maintenance and care 4
6 Product information 4
7 Warranty 4
8 Service 5

TABLE DES MATIERABLE DES MATIERES

Wit- your purc-ase you -ave decided on a -ig-- quality product. Get to know t-e product before you start to use it. Carefully read t-e following assembly instructions. se t-e product only as described and only for t-e given areas of application. Keep t-ese instructions safe. W-en passing t-e product on to a t-ird party, always make sure t-at t-e documentation is included.

1. First open t-e -ook & loop Velcro fasteners.
2. Now put t-e guards on Please make sure t-at your knees or elbows are completely covered by t-e plastic caps Pull t-e "stocking" over your arm or your leg.
3. Now put t-e elastic fastening straps around your legs or arms. After t-is pus- t-e ends at t-e front of your protector on to t-e respective -ook & loop areas.
   4 T-e knee and elbow pads must be fastened tig-tly so t-at t-ey cannot sift out of place. T-ey are only able to offer t-e best possible protection w-en worn in t-is way. However, do not fix t-e fastening straps so tig-tly t-at blood circulation is restricted.

2P PROTECTORS FOR NORMALRRERERSLERNORMAL

SKATING

T-e European standard EN 14120 defines two protector performance classes: level 1: protectors for normal roller sports and level 2: protectors for acrobatic roller sports You -ave decided on performance level 1 protectors

Knee pads, elbow pads, palm/-and pads and -elmet are part of t-e complete outfit.

Even t-e best equipment does not give total protection T-e risk can be minimised but injuries are always possible as experienced skaters know only too well T-erefore always skate carefully and wit-in your limits You s-ould preferably attend a skater training sc-ool T-ere you can learn skating technique, w-ic- includes -ow to "fall correctly".

Please note t-at t-e efficiency of t-e protectors can be reduced w-en subjected to -ig- or low temperatures.

To obtain t-e best possible protection, first select t-e rig-t size of protectors. Try t-em on to c-eck -ow t-ey matc- your knee, arm and -and size. T-e protectors may not fit too loosely. T-ey s-ould be snug and difficult to move back and fort-or out of position.

3 PTTTINKGODNTHEKKKNEEAANNIDEEBBOWPAATSS

4 PPTTINKGCOINTHEEPAAM/HAND PADS

1. First open t-e -ook & loop Velcro fasteners.
2. Left guard marked wit- "left"; rig-t guard marked wit-"rig-t".
3. Run your t-umbs t-roug- t-e corresponding openings of t-e respective protector so t-at t-e palm lies on t-e up-olstered inside.
4. Now take -old of t-e fastening strap labelled 2 in t-e figure and insert it t-roug-t-e loop provided as s-own In order to fasten it, press t-e fastening strap 2 against t-e -ook & loop area 1 provided.
5. Stabilise t-e wrist as s-own. Wrap t-e fastening strap around your wrist as s-own with t-e arrow and press t-e end against t-e -ook & loop area.
6. As you see, t-e bent protection track is now located on t-e inside of t-e-and.

7. T-e palm/-and pads must be fastened tig-tly to t-e wrist so t-at t-ey cannot s-ift out of place. T-ey are only able to offer t-e best possible protection w-en worn in t-is way. However, do not fix t-e fastening straps so tig-tly t-at blood circulation is restricted.

8. To take off t-e palm/-and pads, proceed t-e o'er way round.

5 MAINTENANCE AND CAREINTENANCE AND CARE

Material:

outer material: nylon & polyester

protectors: polypropylene

padding:EVA foam, nylon & polyester

C-heck your protectors before every use, and particularly t-oroughly after falls, for signs of damage. If t-e protectors are defective, for example due to rips, cracks or loose parts, t-ey are no longer in working order. T-ey may, t-erefore, no longer be used.

Please keep t-e -ook & loop free of dirt to maintain ad-esive strengt-. Replace t-e -ook & loop areas as soon as ad-esive strengt- deteriorates. Please do not make any c-anges to t-e protectors as t-e protective function can t-en no longer be guaranteed.

CleaningCleaning

Dirt can be removed from your protectors by brus-ing.

Ground in dirt can be removed by was-ing in lukewarm water or wit- a neutral detergent solution. Rinse afterwards wit- clean water. Avoid cleaning t-e protectors wit- strong cleaning agents or cleaning agents containing solvent. Never clean t-em in t-e was-ing mac-ine and wit- a dryer or iron.

Storage and transportation

T-e protectors s-ould not be stored or transported in direct sunlig-t or in a warm place to avoid t-e risk of formation of cracks or decomposition, w-ic- can s-orten t-e life of t-e protectors and limit t-eir usability considerably.

Notes regarding disposal

T-is product may be delivered in packaging in order to prevent transport damage. T-e packaging materials are produced from raw materials, w-ic- are recyclable. Please sort t-ese materials and dispose of appropriately. If you wish to dispose of t-e product itself, do so in accordance with valid regulations. Your municipal authority can provide you wit information.

Important: Only protectors in a perfect condition can offer adequate corresponding protection.

6 PPRDDXCITTHNIFSDRAAATCDIN

Kneepad left & Kneepad rig-t

Elbow guard left & Elbow guard rig-†

Palm/-and pads left & Palm/-and pads rig-t

Part description Material

Outer material 32% Nylon, 68% Polyester

p-olstering 100% EVA

Caps 100% Polypropylene

Rivet 100% Metal

I.S.M. Import Service Management GmbH

Rat-enaustr. 4, D-51427 Berg. Gladbac-, Germany

Production year: 2016

E design c- Eck according to EN 14120:2003 + A1:2007

Level 1 (protectors for normal roller-skating)

Range A (protectors for users less an 25kg in weig-t)

Size S/M, approx. 3 - 7 years (100 - 130cm)

Range B (protectors for users wit- body weig-t from 25 to 50kg

Size L/XL, approx. Size 8-12 years (130 - 160cm)

C-eched wit

TÜV R-einland LGA Products GmbH

Tillystr 2, D-90431 Nurnberg, Germany

Notified body no. 0197

www.tuv.com ID 111210730

7 WwWARRANTY

T-e product was produced with great care and under constant supervision. You receive a t-ree-year warranty for t-is product from t-e date of purc-ase. Please retain your receipt. T-e warranty applies only to material and workmans-ip and does not apply to misuse or improper -andling. Your statutory rig-ts, especially t-e warranty rig-ts, are not affected by t-is warranty.

Wit- regard to complaints, please contact t-e following service -otline or contact us by e-mail. Any repairs under t-e warranty, statutory guarantees or t-rouggoodwill do not extend t-e warranty period. T-is also

applies to replaced and repaired parts. Repairs after

the warranty are subject to a charge.

8SSERVICEERVICE

Name: ISM Service Center

E-Mail: [e-mail]

Tel: ++800 52776787 (free of charge)

Corporate Address:

I.S.M. GmbH, Rathenaustr. 4,

D-51427 Berg. Gladbach, Germany

9 (FR/BE)(FRA(BE) DANIEGATION TILISATION

Felicitations!

Chere cliente, cher client,

Nom: ISM Service Center

E-Mail: [e-mail]

Telephone: ++800 52776787 (gravitation)

Name: ISM Service Center

E-Mail: [e-mail]