H6 ID46G3HTB - Oven HAIER - Free user manual and instructions

USER MANUAL H6 ID46G3HTB HAIER

TürkçeWELCOME Thank you for choosing our product. To ensure your safety and get the best results, please read this manual carefully, including the safety in- strucons, and keep it for future reference. Before installing the oven note the serial number, which you might need for repairs. Check for any damage during transportaon and consult a technician if you’re unsure before using it. Keep packaging materials away from children.

NOTE: Please note that the oven’s features and accessories may vary depending on the model you purchased.SUMMARY

1. SAFETY INFORMATION

2. PRODUCT INTRODUCTION

6.2.2. Outside the oven: removal and cleaning the glass door

6.3. Cleaning of accessories 6.4. Maintenance

8.1. Appliance disposal 8.2. Saving and respecng the environment

• Do not use a steam cleaner for cleaning operaons.

• During use the appliance become hot. Care should be taken to avoid touching heang elements inside the oven. Use in accordance with aendend use

• Only use the oven for its intended purpose, that is only for the cook- ing of foods: any other use, for example as a heat source, is consid- ered improper and therefore dangerous. The manufacturer cannot be held responsible for any damage resulng from improper, incor- rect or unreasonable usage. Use limitaons

• The appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilies or lack of experience and knowledge if they have been given super- vision or instrucon concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and maintenance shall not be made by children without supervision.

• This appliance is not intended to be used by persons (including chil- dren) with reduced physical, sensory or mental capabilies, or lack of experience and knowledge, unless they have been given supervision or instrucon concerning use of the appliance by a person responsi- ble for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

WARNING: the appliance and its accessible parts become hot dur-

ing use. Care should be taken to avoid touching heang elements Children less than 8 years of age shall be kept at away unless conn- uously supervised.

WARNING: Accessible parts may become hot during use. Young

children should be kept away. SAFETY INFORMATIONEN 6 INSTALLATION WARNINGS

• The oven can be located high in a column or under a worktop.

• Before xing, you must ensure good venlaon in the oven space to allow proper circulaon of the fresh air required for cooling and protecng the internal parts. Make the openings specied on the il- lustraons according to the type of ng. Always x the oven to the furniture with screws provided with the appliance.

• No addional operaon/seng is required in order to operate the appliance at the rated frequencies.

• The appliance must not be installed behind a decorave door in or- der to avoid overheang.

• During installaon the oven should be disconnected from the mains to avoid overheang.

• If the assistance of the manufacturer is required to recfy faults aris- ing from incorrect installaon, this assistance is not covered by the guarantee. The installaon instrucons for professionally qualied personnel must be followed.

• Incorrect installaon may cause harm or injury to people, animals or belongings. The manufacturer cannot be held responsible for such harm or injury.

• Installaon must be carried on by a qualied technician who must know and respect the laws in force in the country of installaon and the manufacturer’s instrucon.

• Aer unboxing the appliance, always check it is not damaged, in case of issue contact the customer service before installing and do not connect to the power supply.

• Remove the packaging material before operang the appliance.

• During installaon do not use the oven door’s handle to li and move the oven.

• The installaon furniture and the adjacent ones must with stand tem- peratures of 95°C.

• It is recommended to wear protecve gloves during installaon to avoid cut injuries.

• Do not install the product in open environments exposed to atmos- pheric agents.

• This appliance is designed to be used at altude lower than 2000m. SAFETY INFORMATIONEN 7

• To remove protecve lms and adversement sckers on front sur- face of the oven before rst usage ELECTRICAL WARNINGS

• The socket must be suitable for the load indicated on the tag and must have ground contact connected and in operaon. The earth conductor is yellow-green in colour. This operaon should be carried out by a suitably qualied professional.

• Connecon to the power source can be made by plug or by xed wir- ing placing an omnipolar breaker, with contact separaon compliant to the requirements for overvoltage category III, between the appli- ance and the power source that can bear the maximum connected load and that is in line with current legislaon.

• ln case of incompability between the socket and the appliance plug, ask a qualied electrician to substute the socket with another suita- ble type. The plug and the socket must be conformed to the current norms of the installaon country.

• The yellow-green earth cable should not be interrupted by the break- er. The socket or omnipolar breaker used for the connecon should be easily accessible when the appliance is installed.

• lf the supply cord is damaged, it must be replaced by the manufactur- er, its service agent or similarly qualied persons in order to avoid a hazard. For any repairs, refer only to the Customer Care Department and request the use of original spare parts.

• Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it.

WARNING: ensure that the appliance is switched o before re-

placing the bulb, to avoid the possibility of electric shocks.

• The oven must be switched o before removing the removable parts. Aer cleaning, reassemble them according the instrucons.

• The use of any electrical appliance implies the observance of some fundamental rules: ശ do not pull on the power cable to disconnect the appliance from the power source; ശ do not touch the appliance with wet or damp hands or feet; ശ in general the use of adaptors, mulple sockets and extension cables is not recommended; SAFETY INFORMATIONEN 8 ശ in case of malfuncon and/or poor operaon, switch o the ap- pliance and do not tamper with it.

NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available so that the oven can be con- nected to this if it is removed from the space in which it is installed.

• Any repair, installaon and maintenance not carried out correctly can seriously endanger the user.

• The manufacturing company hereby states that it does not assume any responsibility for direct or indirect damages caused by incorrect installaon, maintenance, or repair work. Furthermore, it is not liable for damages caused by the absence or interrupon of the grounding system (e.g., electric shock).

CAUTION: in order to avoid a hazard due to inadvertent reseng of the thermal cut-out, this appliance must not be supplier through an external switching device, such as a mer, or connected to a cir- cuit that is regularly switched on and o by the ulity.

• The appliance is not designed to be acvated by an external mer or separate remote control system. USE & MANTEINANCE

• The dripping pan collects the residues that drip during cooking.

• When you place the Airfry tray or the grid on the side racks, make sure that the shorter secon of the side (between the stop and the extremity) is directed towards the interior of the oven. If the grid has a decorave metal bar, pay aenon to posion it on the exterior of the oven so that the brand logo can be visible and readable. For the correct posioning refer also to the image in the Accessories secon of this user manual.

• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glasses, since they can scratch the surface, which may result in shaering of the glass.

• Only use the temperature probe recommended for this oven.

• During cooking, moisture may condense inside the oven cavity or on the glass of the door. This is a normal condion. To reduce this eect, wait 10-15 minutes aer turning on the power before pung food inside the oven. ln any case, the condensaon disappears when the oven reaches the cooking temperature. SAFETY INFORMATIONEN 9

• Cook the vegetables in a container with a lid instead of an open tray.

• Avoid leaving food inside the oven aer cooking for more than 15/20 minutes.

• A long power supply failure during an occurring cooking phase may cause a malfuncon of the monitor. ln this case contact customer service.

WARNING: Do not line the oven walls with aluminium foil or sin-

gle-use protecon available from stores. Aluminium foil or any other protecon, in direct contact with the hot enamel, risk melng and deteriorang the enamel of the insides.

CAUTION: Do not rell the cavity boom with water during cook- ing or when the oven is hot.

• Oven trays and grids are not suitable for direct contact with food. Please use suitable cookware or baking paper.

• Wash all accessories before rst use with a soluon of hot water and washing up liquid. WARNINGS (*FOR PYRO OVENS)

• Excess spillage must be removed before cleaning.

WARNING: before iniang the automac cleaning cycle:

ശ Clean the oven door; ശ Remove large or coarse food residues from the inside of the oven using a damp sponge. Do not use detergents; ശ Remove all accessories and the sliding rack kit (where present); ശ Do not place tea towels.

• ln ovens with meat probe it is necessary, before making the cleaning cycle, close the hole with the nut provided. Always close the hole with the nut when the meat probe is not used.

• During the pyrolyc cleaning process (if available), the surfaces may get hoer than usual and children should be kept away.

• If a hob has been ed above the oven, never use the hob while the Pyrolizer is working, this will prevent the hob from overheang. SAFETY INFORMATIONEN 10 WARNINGS for WIRELESS TEMPERATURE PROBE

• This product is exclusive for oven appliances. It should only be used as described in this User Manual.

• DO NOT TOUCH Preci Probe WITH BARE HANDS JUST AFTER COOK- ING. Always wear oven gloves to remove Preci Probe from the food aer cooking.

• To use the temperature probe correctly, it is essenal to fully insert the metal bar of the probe into the food during cooking unl it reaches the black-colored ceramic poron located at the p of the probe. Insert Preci Probe in the food up to there

• Do not expose the metal part of Preci Probe to the heat generated by oven directly.

• Do not use Preci Probe in another appliance except for the built-in oven.

• Do not use Preci Probe in a microwave oven.

• Preci Probe can be cleaned and washed but do not immerse it long in water.

• This product is not intended for use by persons with ages 12 and under.

• The supplier will not be liable for any damage of Preci Probe due to misuse of the device.

• Clean the Preci Probe before the use.

• Probe can work in this range of temperature: 10 °C to an internal maximum temperature of 100°C of the metal part. Ceramic part can reach 350°C.

• If the Preci Probe temperature exceeds 100°C, cooking will stop and the Preci Probe must be removed from the oven as soon as possible, wearing gloves, to avoid damage to the probe. SAFETY INFORMATIONEN 11

7. Lateral wire grids (if present: only for

9. Camera (only if present)

10. Serial number & QR Code

2. PRODUCT INTRODUCTION

2.1. OVERVIEW OF THE PRODUCT

Write here your serial number for future reference. PRODUCT INTRODUCTION

Metal grid A metal grid in an oven is a removable, adjusta

ble shelf that supports cookware, ensuring even cooking, and makes cleaning easy. It can be used to hold plates and pans at dierent heights for various cooking needs. STOP STOP STOP Baking tray (only if present*) A baking tray is ideal for achieving even boom browning, making it perfect for cookies and pas

tries due to its shallow, at design. Addionally, placing it under a cooking grid can help collect drips and prevent messes in the oven. The deeper tray is ideal for recipes with added liquids or layers, such as casseroles or roasts. Its depth is specically designed to ensure the de

sired consistency of the food prepared in it. Deeper Tray Telescopic Guides (only if present*) Telescopic oven rails are shelves that can be extended, making it easier to place or remove items, without the need to reach deep inside a hot oven. They improve safety, stability, and can be adjusted at dierent level posions.

2.2 ACCESSORIESEN 12

PRODUCT INTRODUCTION Lateral wire grids (only if present*) Located on both sides of the oven cavity, the side racks are designed for placing baking tray and grids during the cooking.

NOTE: 6 or 7 levels depending on the model. Dual tray – BBQ mode (only if present*) The concave shape allows a correct circulaon of humidity generated in cooking, keeping the food humidity rate high. According to the quan

ty of water inserted in the tray, a drier or more “wet” cooking will be obtained. The convex shape is suitable for grilling in the oven at high temperature (220°) allowing a BBQ result even at home with lile smoke thanks to the drainage acon of the fats on the boom of the tray. This Preci Probe is a temperature sensor that, in

serted into the food and connected to the oven via cable, allows to control the inner tempera

ture of the food during cooking. It is mainly used for sh and meat. So close and open hinges control the door’s moon, ensuring smooth movement and pre

venng slamming. Soclose/So open hinges (only if present*) Dual tray – STEAM mode (only if present*) Preci Probe (only if present*) Special panels coated with enamel, made with a microporous structure to turn fat into gaseous elements that are easy to remove. Replace aer 3 years of use (at 2/3 cooking cycles per week). Catalyc Panels (only if present*)

YEARSEN 13 PRODUCT INTRODUCTION The bionic vision camera detects and recognizes the food, seng the most appropriate parame

ters to cook it. Camera (only if present*) The airfry tray ensures that hot air reaches the food evenly and tridimensionally, resulng in a crispier exterior while maintaining tenderness inside. A baking tray can be oponally placed at L1 to collect juices or breadings. Airfry tray (only if present*) Turnspit (only if present*) The turnspit works together with the top heat

ing element, by rotang the food can be cooked omogeniusly. It is best used for medium-sized food. Ideal for rediscovering the taste of tradi

onal roast. EN: Oven trays and grids are not suitable for direct contact with food. Please use suitable cookware or baking paperEN 14 2.3. CONTROL PANEL

Funcons and funcon ranking can be changed depending on the model.

MAIN FUNCTIONS The control panel has the following main funcons: Symbol Funcon Descripon On/O Press to turn on/o the oven. Remote Control ON/OFF Press the buon to acvate remote control, aer pairing the oven with the hOn app (through the applicaon). Light Press to turn on/o the oven cavity light Funcons Press once to access Manual funcons, twice for Everyday cooking programs, three mes for Cleaning menu, and four mes for WIFI menu. Time Press once for cooking duraon, twice for the minute minder (available in standby mode), three mes for delay start. In standby mode are avail

able the kitchen mer and, by pressing for 3 sec, the Time of day. Temperature Press once to check the cavity temperature, twice to acvate the fastpreheang opon (only available during the oven’s preheat phase). Navigaon buons Press Navigaon buons to scroll between func

Power consumpon of the product in networked standby if all wired network ports are connected and all wireless network ports are acvated: 2,0 W How to acvate wireless network port: Wi module switches on as soon as the user press the power on buon. How to deacvate wireless network port: Wi- module deacvates as soon as the user presses the power o buon. The wi- can also be de

acvated when the oven is on by selecng “o” in the Wi- sengs menu. Hereby, Candy Hoover Group Srl declares that the radio equipment is in compliance with Direcve 2014/53/EU and with the relevant statutory requirements for the UK market. The full text of the declaraon of conformity is available at the following internet address: www.candy-group.com PRODUCT INTRODUCTIONEN 16

HOW TO INTERACT WITH THE APP

Your appliance may be connected to your home wireless network and operated remotely using the app. Connect your appliance to ensure it stays up to date with the latest soware and features.

• Once the oven is turned on, the WIFI icons blinks for 30 minutes. During this period it's possible to enroll the product.

• Ensure your home Wi-Fi network is turned on.

• You will be given step by step guidance on both your appliance and mobile device.

• It may take up to 10 minutes to connect your oven.

• For further guidance and troubleshooting, please refer to the app. Download on your smartphone.

• You can register through social accounts or sign up with your personal email

• Select “Add appliance”. PRODUCT INTRODUCTIONEN 17 Step 2

• Allow your location permission. Step 3

• Select oven from the appliance category. Step 4

• Turn on your appliance; if it is already on, turn it off and on again. PRODUCT INTRODUCTIONEN 18 Step 7

• Your Oven will be found and you can control it through hOn. Step 5

• After turning on, the hOn app will start searching for your home appliance. Step 6.1-6.2

• Select your home appliance, tap on “connect” and wait a few seconds. PRODUCT INTRODUCTIONEN 19

HOW TO CHANGE WIFI SETTINGS

Once the appliance is connected, the user can change the WiFi sengs between:

• WIFI ON: It is only possible to monitor the oven status by App.

• WIFI hOn: The oven can be used exclusively by App.

• WIFI OFF: The oven is not connected but still enrolled with network credentials saved.

• WIFI RESET: The connection is reset and a new enrollment is possible.

and enter in WIFI menu. On display appears “On”.

2. On display appears “On”.

3. Use the arrows unl “O” or reset seng “rSt” will be showed.

REMOTE CONTROL The Remote Control oers numerous advantages for users, enhancing convenience, eciency, and the overall cooking experience, by giving the capability to control the product directly from both the appliance and hOn App. This funcon allows, through your device, to enjoy various features, such as: instant or scheduled start of recipes or cooking programs already available in the app; real-me monitoring of the progress of your recipes; adjustment of the cooking parameters in use; monitoring of the cooking process using the probe; managing saved recipes using the “Jolly funcon” on the product (see related secon). Furthermore, it is possible to receive nocaons once programs or recipes are completed. The Remote Control can be acvated exclusively when the product is enrolled.

NOTE: It is available for all cooking funcons on the product, except for Gran, Grill and Supergrill programs. How to acvate Remote Control:

to select the WIFI mode.

2. On display appears “connect”. Tap

to select the “hOn” mode and tap to acvate Remote Control.

5. Access to the App, select a program and let the cooking starts. During the process is possible

to control and change the program parameters from both product and App. PRODUCT INTRODUCTION CHANGE STATUSEN 20 It’s also possible to acvate Remote Control during cooking process by pressing related buon How to stop Remote Control: While the cooking program is in progress, it can be stopped directly from the product itself by press

ing the corresponding buon of Remote Control that came with your appliance. You can also stop the cooking program remotely using the app by clicking the ‘STOP’ Buon on dis

play device. The oven will automacally stop the cooking.

NOTE: If the user stops the cooking in progress from the oven, simultaneously the stopped cook- ing will be seen in the App. PRODUCT INTRODUCTIONEN 21 When you rst turn on the oven, you might noce some smoke. Don’t worry, just wait for the smoke to clear before using the oven. How door works During the pyrolyc cleaning process, the oven door remains locked at all mes. If it’s not locked, the oven will display error code 24 and pause the cleaning funcon. How illuminaon works The oven cavity is illuminated by one or more light bulbs, typically acvated each me a cooking funcon begins. For ovens equipped with a door switch (see below), the light automacally turns on when the door is opened. For ovens equipped with lamp buon, it can also be used to acvate the lighng. If the oven door remains open for more than 10 minutes, the lights will automacally turn o. During pyrolyc cleaning process light remains o. * How cooling fan works The cooling fan is responsible for dissipang the heat, keeping the oven and its surroundings from geng too hot, as well as protecng kitchen appliances from the eects of high temperatures. For this reason, the cooling fan remains audible for a period of me even aer the oven is turned o. It operates during and aer cooking cycle in relaon to the internal temperature of the oven. When the cooling fan is operaonal, it usually generates a gentle humming or whirring noise. You may also noce a warm airow emanang from the gap between the oven door and the control panel. During pyrolyc cleaning and when door is locked, cooling fan is switched on. * During ECO funcon the light will remain o. (*only for pyro ovens)

BEFORE STARTINGEN 22 3.2. FIRST USAGE When the appliance is switched On for the rst me, the inial step is to set me of day, choose be

• SET THE TIME: The display will show the blinking preset time '12:00'. To modify it, hold and use the arrows to set the current hour. Press to confirm hours. Follow the same procedure to set the minutes. To confirm press

NOTE: The opon to set the amperage is only available during the inial installaon. To modify the set amperage, please refer to the post-installaon instrucons. BEFORE STARTING

• BRIGHTNESS: The display shows the symbol “brig”. The numbers represent the level of brightness intensity, editable using the arrows. To confirm press

• AMPERAGE: By default, the oven is set to work with higher power suitable for households with more than 3 kW (16 A). If your home has lower power, you can change this setting to 13 A.

• This setting affects how quickly the oven heats up. Choosing the higher option (16A) means it heats up faster (because the power absorption is increased). On the display, you'll see two choices: 13A and 16A. Select your preferred one by using the arrows. To confirm press

• SOUND: The display shows the symbol “Sound”. The numbers represent the level of sound intensity, editable using the arrows. To confirm press

• POST INSTALLATION INSTRUCTION It is possible to go back to inial sengs by pressing Lamp buon for 5 sec BEFORE STARTING Clean the oven before using for the rst me. Wipe over external surfaces with a damp so cloth. Wash all accessories and wipe inside the oven with a soluon of hot water and washing up liquid. Set the empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering smells of newness. H20 3.3. PRELIMINARY CLEANING PRESS TO CONFIRM SET SOUND 5 SECEN 24 FUNCTIONS MENU Access the Funcon menu by pressing

To navigate into tap as many mes as is needed to enter in the following sengs:

Symbol Funcon Descripon MAIN FUNCTIONS This funcon allows to select the desired cooking program by using arrows. Tap and to set me and temperature. Press to start the funcon. To pause the program, click again. FOOD CATEGORIES In this menu you can access to 4 food cooking categories already integrated on your oven by using arrows. The display will show default me and temperature. WIFI In this mode you can connect your oven to a network and enroll it with the hOn App. CLEANING FUNCTIONS This funcon allows to choose a cleaning system available on your oven.EN 25 TIME MENU Aer having selecng the cooking program, access Time menu by pressing

To navigate into tap as many mes as is needed to enter in the following sengs:

NOTE: several parameters cannot be set at the same me, therefore only the last set remains in the memory while the previous one is deleted.

OPERATION OF PRODUCT

Symbol Funcon Descripon a)COOKING DURATION Allows to preset the cooking me required for the recipe chosen. Press to enter in the Time menu. Tap as many mes as you need to select “Cooking duraon” funcon. Then use the arrows to regulate the value and press to conrm. The countdown starts at the end of preheang (if present). Du- ring cooking phase is possible to change the duraon value by pressing and by using the arrows. When duraon is elapsed the display shows “End” and the cooking stops. b)MINUTE MINDER Allows to use the oven as alarm clock. Press to enter in the Time menu. Tap as many mes as you need to select “Minute minder” funcon. Then use the arrows to regulate the value and press to conrm. During cooking phase is possible to change the duraon value by pressing and by using the arrows. Then press to restart the cooking. When duraon is elapsed, the cooking connues unl manually interrupted. This funcon can be also set when the oven is in stand by mode by pressing . When acvated, the minute minder ope- rates independently of the oven’s cooking funcons. c)DELAY START Allows to choose the cooking start me. Press to enter in the Time menu. Tap as many mes as you need to select “Delay start” funcon. Then use the arrows to regulate the value and press to conrm. NOTE: Delay start is acvable only aer seng Cooking Dura- on and it is not available with grill’s funcons Duraon Kitchen mer Delay start Preci probe Set me of day Time value Time indicator Preci probe feedback (baery and signal status)EN 26

SET DURATION SET MINUTE MINDER SET DELAY START COOKING DURATION MINUTE MINDER DELAY STARTEN 27 TEMPERATURE MENU Aer having selecng the cooking program, access Temperature menu by pressing . To navigate into tap as many mes as is needed to enter in the following sengs: ADDITIONAL FUNCTION Symbol Funcon Descripon TEMPERATURE Press to set the temperature and use arrows to regulate the value. FAST PREHEATING Press twice to set the fast tempe- rature. Symbol Funcon Descripon CHILD LOCK This funcon allows you to lock the screen to prevent any unwanted use by minors. To acvate it, simultaneou- sly press the Lamp and Remote Con- trol buons for 3 seconds. An icon with a padlock will appear on the user interface. In this condion, the oven user interface is locked, and no changes in sengs can be made. To deacvate the child lock, press the Lamp and Remote Control buons again for 3 seconds (the icon with the key will disappear).

OPERATION OF PRODUCT

Key Lock Preheang Fast preheang Door Lock Wi-Fi feedback Preheat and cool down feeback Temperature value Tempeature indicatorEN 28 In order to accelerate preheang phase, the fast-preheang opon can be selected by pressing the temperature icon for 3s aer having selected cooking program and temperature. This opon will acvate a combinaon of fan and heang elements regardless of the chosen cooking funcon. To save energy, when fast preheang is acvated the lamp will be turned OFF unl the oven reaches the desired temperature

NOTE: for funcons that require preheang, ensure all accessories are removed during this phase. Follow instrucons in the table below for what regards preheang. “YES/FAST PREHEAT” means that preheang is required and fast preheat opon is available; “NO” means that preheat is not available and foods must be inserted with cold oven. 4.2. COOKING FUNCTIONS

Symbol Funcon T°C default T°C range Suggested shelf posion Preheat Suggesons *Convenonal 200°C 30-250°C L2/L3 YES/FAST PREHEAT IDEAL FOR: cakes, breads, biscuits, quiches on one level using both upper and lower heang. Can be used with Preci Probe. Convecon + fan 175°C 50-250°C L2/L3/L4 YES/FAST PREHEAT IDEAL FOR: roasts, casseroles, vegetables and pies with moist llings on one level. Ideal for cooking foods with high water content. Can be used with Preci Probe. Mul-Level 160°C 50-250°C L4 for single level L2+L5 for double level L2+L4+L6 for triple level YES/FAST PREHEAT IDEAL FOR: cakes, biscuits and pizzas on one or more levels. Ideal to cook dierent foods. Can be used with Preci Probe. Boom heang 170°C 50-230°C

YES/FAST PREHEAT IDEAL FOR: crème caramel, puddings and bain marie on one level. This funcon can be also used for nishing a preparaon. Can be used with Preci Probe Boom heang+fan 170°C 50-230°C

YES/FAST PREHEAT IDEAL FOR: pizzas, salty cakes, tarts and foods with liquid toppings on one level. Can be used with Preci Probe. Grill

L1-L5 L6 for thin food L5 for thicker foods

IDEAL FOR: gran, grilled meat, sh, vegetables. This funcon uses only the inner top heang element. Use with the door closed. Place a tray underneath to collect juices. **Supergrill

IDEAL FOR: big quanes of sausages, steaks and toast bread. The enre area below the grill element becomes hot. Use with the door closed. Turn food two thirds of the way through cooking (If necessary).EN 29 Symbol Funcon T°C default T°C range Suggested shelf posion Preheat Suggesons **Gran 200°C 150-250°C L4/L5 YES/FAST PREHEAT IDEAL FOR: whole pieces of meat (roasts) or granated foods. Use with the door closed. Slide the drip tray under the shelf to collect juices. Turn food over halfway through cooking if needed. Mullevel + 200°C 150-250°C 6 Levels L1+L2+L3+L6 7 Levels L1+L3+L5+L7 YES/FAST PREHEAT IDEAL FOR: complete menu cooking without odor mixing. Foods do not have to be extracted at the same cooking

*ECO 190 °C 150-220 °C L3 NO IDEAL FOR: cooking meat, sh or vegetables This funcon allows to save energy during cooking keeping the food moist and tender. Cavity lamp is switched o. Airfry 200°C 150-250°C L4 NO IDEAL FOR: preparing frozen foods or breaded par-cooked foods which are usually fried. Thanks to the dedicated tray, the hot air can ow evenly over the foods. Bread 210°C 190-220°C L2/L3 NO IDEAL FOR: cooking bread and bread loaves Jolly - - - Special Funcon Pizza 300°C 200-300°C L2/L3 NO IDEAL FOR: all kind of pizzas without preheang the oven. Use lower temperatures for frozen items and 300°C for home-made recipes White meat 190°C 180-200°C L3/L4 NO IDEAL FOR: poultry and cuts of white meat Red meat 190°C 180-200°C L3/L4 NO IDEAL FOR: beef and cuts of red meat Fish 170°C 160-180°C L3/L4 NO IDEAL FOR: whole sh and llets Veg 190°C 180-200°C L3/L4 NO IDEAL FOR: roasted vegetables and potatoes

• Tested in accordance with the EN 60350-1 for the purpose of energy consumpon declaraon and energy class. **Use with the door closed.

OPERATION OF PRODUCTEN 30

Jolly funcon Thanks to the Jolly funcon, this product oers a fully customizable experience, allowing you to store your personalized recipes directly on the oven. You can execute these recipes as oen as you like, even without the need to log into the app. How to Set the Jolly Funcon: To set the Jolly funcon on your oven, open the app’s recipe secon, select the recipe you want to use, and click ‘Use As Jolly Funcon’. From this point onward, you can launch it from the product even without interacon with the app. Simply turn the funcon knob to the Jolly func

on to start the cooking process. The display will show the preset temperature.

4.2.2. SPECIAL FUNCTIONS

Symbol Funcon T°C default T°C range Suggested shelf posion Preheat Suggesons Jolly - - - Add to the preset list of funcons your favorite one that’s not already present in your oven. You can congure it through the hOn app.

OPERATION OF PRODUCTEN 31

How to edit the Jolly funcon: To edit a Jolly funcon, go to the app’s recipe secon and select the card of the recipe designated as a Jolly funcon. Tap the “edit” buon to custom

ize the recipe and modify the previously set sengs. A pop-up message will inform you that to save the newly modied Jolly funcon, you must remove the previous one. If you conrm, the previous Jolly funcon will be deleted, and the new parameters will be saved on the product and will be visible in the app. How to Delete the Jolly Funcon: To remove the Jolly funcon from the oven’s user interface, access the app’s recipe secon. By tapping on the card of the recipe designated as a Jolly funcon, it’s pos

sible to delete it by clicking the red buon ‘delete buon’. A pop-up will conrm the operaon, asking for your conrmaon. If you proceed, the Jolly funcon saved on the oven will be removed, and it will no longer be available in the app.

1. Put Preci Probe into the charger and close the cover.

2. Connect the charger to a USB power source, such as USB adapter or USB socket of PC/ note

book with the USB cable. The charger may not be working properly with power bank because of its auto switch-o funcon.

3. LED of the charger will turn on and is ashing during charging. It will turn o when Preci Probe

is fully charged. How to enroll and use Preci Probe:

1. Insert the Probe in the food.

to select the desired funcon and Tap as many mes as you need to select Probe icon.

3. Aer a while, the oven will recognize the Probe code. Tap

, and use arrows to set the target temperature.

to conrm. From this moment, the oven will use the Probe’s data to monitor the internal temperature of your food.

5. Once the desired internal temperature is reached, the alarm sounds and the oven turns o.

Carefully remove the Probe from the food.

OPERATION OF PRODUCT

CHARGING CHARGEDEN 33 The Probe can be used with manual funcons (Convenonal, Convenonal + Fan, Grill, Super grill, Gra- n and Mullevel), with FOOD COOKING CATEGORIES (Meat, Fish and Vegetables) Cooking ps The Probe is equipped with a single measuring point. Insert it enrely into the food with the metal p posioned at the centre of the food. Place this point as close as possible to the thickest (coldest) part of the food to accurately monitor the cooking process. Food category Suggested core T°C Suggested posioning Roast beef 45°C Diagonally in the thickest part. For cylindrical shape foods (i.e. beef roasts) place the p as close as possible to the geometric center Roasted meats 55 °C / 60 °C / 65 °C Poultry 83-85°C Into the thickest part of the breast Fish (whole/steaks) 65°C Diagonally in the thickest part Bread/casseroles 90°C Close to the geometric center of the food

The bionic vision camera works with the Preci Taste funcon available on the App. The camera can recognize the food and set the related parameters to cook it properly. You can monitor the status of the cooking process directly from the App. The camera isn’t available during pre-heang, Eco, and Pyrolysis funcons. To use the camera, the Remote Control must be acve. Step 1. On the App, press “Special Feature”, then select “Preci Taste” and press “Start Now”. Step 2. Select the food category that you want to cook, then press “Next” to conrm.

OPERATION OF PRODUCT

• only if presentEN 35 Step 3. Aer the Preci Taste recipe is launched from the App, pre-heang will start. To start this func- on, the oven cavity must be empty. Step 4. Aer the pre-heang phase, the food can be placed in the cavity. Close the oven door to enable the food to be detected. The oven will recognize the food through the camera and set the ap

propriate parameters. During this process, “hOn” will be shown on the oven display. Aer receiving conrmaon from the user, the cooking process starts automacally.

NOTE: Before operang the camera, make sure that the glass in the camera’s range is clean to guarantee a clear view. The Mul Step feature allows to maintain previously set cooking parameters (temperature and me) while changing funcon during cooking, by pressing the buon. The feature is available for all the MAIN FUNCTIONS except for ECO and JOLLY programs

4.2.3. MULTI STEP FEATURE

Step 5. When cooking ends, “End” will be shown on the display. The cooking me can be extended should you prefer your food more cooked.

COOKING GUIDELINES Category Recipe N°of levels Cooking program T°C Prehe-

Cooking accessory Shelf posion Cooking me aer preheang* (min) Sweet bakery Small cakes /Muns

Baking tray L2/L3 15-20 18-25 2 Mullevel 180°C Y Baking + Deeper trays L2+L5 25-35 Pizza, fresh (Round)

Baking tray L2/L3 8-10 15-20 2 Mullevel 180°C Y Baking + Deeper trays L2+L5 30-40 Pizza, frozen (thin crust)

NOTE: For cooking cakes, quiches and other recipes that require a mold or a container on 2 levels, place the staggered: the upper tray on the le side and the lower tray on the right side. Category Recipe N°of levels Cooking program T°C Prehe-

Metal grid + Ovenproof dish L3 80-90 Frozen french fries (300-500g) 1 AirFry 220°C N Air fry tray** L4 18-25 Potato gran 1 Gran 200°C Y Metal grid + Ovenproof dish L4 15-25 Roasted potatoes 1 Convenonal 200°C Y Baking tray L4 30-50EN 40 Food category menu allows to cook a variety of recipes without preheang the oven, thanks to ded- icated cooking programs tailored to each category needs. Aer selecng the cooking program, the default me will be shown and can be edited by turning the right knob; cooking temperature can be changed by pressing the dedicated icon. Both parameters can be set within a limited range as shown in the table below.

NOTE: if, aer turning o the oven, there is a need to connue cooking, it’s recommended avoid- ing th use of everyday cooking programs and instead opng for standard funcons.

6 ramekins Vegetables 180°C Baking tray + molds L3 25-35 COOKING GUIDELINESEN 43 Regular cleaning can extend the lifecycle of your appliance. Wait for the oven to cool before carrying out manual cleaning.

• After each use of the oven, a minimum of cleaning will help keep the oven perfectly clean.

• Do not line the oven walls with aluminum foil or single-use protection available from stores. Aluminum foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the enamel of the insides.

• In order to prevent excessive dirt of your oven and the resulting strong smokey smells, we recommend not using the oven at very high temperature. It is better to extend the cooking time and lower the temperature a little.

• In addition to the accessories supplied with the oven, we advise you only use dishes and baking molds resistant to very high temperatures.

6.2.1. INSIDE THE OVEN: cleaning funcons

Pyrolyc cleaning (*depending on the oven model) This process relies on the chemical process bearing the same name, which involves the decomposi

on of complex substances through the applicaon of heat treatment. Once iniated, it automacally locks the oven door and swily elevates the temperature to a searing 410°C. At the end of the cleaning cycle, food residues will leave a white coang on the enamel surfaces. To remove these parcles, wipe with a cloth soaked in hot soapy water and use a brush or steel wool. Suitable cleaning agents are hot soapy water or oven cleaner.

6.1. GENERAL RECOMMENDATIONS How does it work:

1. Remove any accessories from the oven, such as grids, side racks and side racks screw (*);

2. Turn funcon knob on

. Turn the dial control to set the Pyrolyc program; Allow the funcon to operate for the preset me. During this process and the following cooling phase, the oven door will remain locked.

3. When the appliance is cool, clean the inner surfaces of the oven with a cloth.

WARNING: Make sure that the appliance is cool before you touch it. Care must be taken with

all hot surfaces as there is a risk of burns. Use dislled or drinkable water. (*) only for models with 7 levels. CARE & CLEANINGEN 44 How does it work:

1. Pour 100 ml of water with a drop of washing-up liquid into the boom embossment of the oven.

. If necessary, turn the dial control to set the Hydro clean program. Allow the funcon to operate for the preset me.

3. At the end of the cleaning process, allow the oven to cool down.

4. When the appliance is cool, clean the inner surfaces of the oven with a cloth.

WARNING: Make sure that the appliance is cool before you touch it. Care must be taken

with all hot surfaces as there is a risk of burns. Use dislled or drinkable water. Wipe the cooking compartment and allow it to dry completely to avoid possible corrosions. H2O cleaning The H2O cleaning funcon is designed to eortlessly tackle light dirt and provide a quick and eco-friendly soluon for cleaning your oven cavity using the power of steam. 100 ml H2O Catalyc cleaning (depending on the oven model) The Catalyc panels line the oven cavity and grant you the luxury of never having to contend with a dirty oven. The panels are coated with a specialized enamel that boasts a microporous structure, adept at ab

sorbing absorbs grease from splashes. Through a catalyc chemical reacon, they eciently convert the absorbed grease into gaseous ele

ments when exposed to high temperatures. Recommendaon: Consider replacing the catalyc panels aer approximately three years of use, especially if you use your oven for two to three cooking cycles per week. This ensures opmal per

formance and cleanliness. CARE & CLEANINGEN 45 CARE & CLEANING

2. Posion the door at 45°. Simultaneously

press the two buons on both the sides of the door’s lateral shoulders and pull towards yourself to remove the upper glasses’ door cover.

1. Posion the door at 90°. Rotate the hinge

locking tabs outward from the oven.

3. Very carefully remove the oven glass,

starng with the inner one. During the procedure, rmly hold the glass with both hands and place them on a cushioned at surface (e.g., on a fabric).

WARNING: the inner and middle glasses

must not hit the camera (*) during their removal or inseron.

WARNING: The outer glass is not

WARNING: The camera (*) shall not

be detached, forced, opened or removed during cleaning operaons

6.2.2. OUTSIDE THE OVEN: removal and cleaning the glass doorEN 46

WARNING: the camera shall be

prevented from coming into contact with any detergents during cleaning operaons.

8. Clean the glass using a so cloth and suita-

ble cleaning products.

9. Insert the glass panels, making sure that the

“LOW-E / PYRO ” label is correctly readable and posioned on the lower le side of the door, near the le-side hinge. This way, the printed label on the rst glass will remain on the inside of the door.Make sure that the “Bionic Vision” text appears as shown here, so that it is correctly readable when the oven door is open.

10. Reaach the upper glasses’ door cover by

pushing it inwards unl you hear a click from the two side buons.

11. Then, bring the door back to 90° and ro-

tate the hinge locking tabs inward towards the inside of the oven.

WARNING: The camera (*) connectors

shall not be disconnected during cleaning operaons.EN 47 CARE & CLEANING Ensure that you clean the accessories thoroughly aer every use and dry them using a towel. For per- sistent residues, consider soaking the accessories in a mixture of water and soap for approximately 30 minutes before giving them a second wash. CLEANING OF SIDE RACKS: ശ 6 levels model

1. Remove the side racks by pulling them in the direcon of the arrows.

2. To clean the side racks either put them in the dishwasher or use a wet sponge, ensuring

that they are dried aerwards.

3. Aer the cleaning process install the side racks in reverse order.

6.3 CLEANING OF ACCESSORIES

1. Remove the side racks by rst pulling the front part in the direcon of the arrow and

detaching the rear part from the screws.

2. To clean the side racks either put them in the dishwasher or use a wet sponge, ensuring

that they are dried aerwards.

3. Aer the cleaning process install the side racks in reverse order: posioning the rear part

between the screws and push the front part in the direcon of the arrow. <90° <90°

• Depending on the oven model.EN 48 COMPONENTS REPLACEMENT Changing the bulb on top:

1. Disconnect the oven from mains supply.

2. Remove the lamp’s glass cover.

3. Disassemble the bulb.

4. Replace the bulb with a new one of the same type.

5. Relocate the lamp’s glass cover.

6. Reconnect the oven from mains supply.

This product contains one or more light sources of energy eciency class G (Lamp)

• In case of issues with this lamp, contact the customer service. OFF OFF CARE & CLEANINGEN 49 CARE & CLEANING Step 1 Step 4 Step 2 Step 5 Step 3 Step 6 OFF

1. Disconnect the oven from mains supply.

2. Use a at-head screwdriver by posioning it to the side of the protecve glass and gently apply

pressure to remove it.

3. Carefully grasp the bulb from its base.

4. Insert the new one.

5. Reinstall the protecve glass by pressing it gently unl it’s locked into posion.

6. Reconnect the oven from mains supply.

This product contains one or more light sources of energy eciency class G (Lamp) OFF OFFEN 50 Error Smoke If, during oven use, an error occurs, the display will show the code “ER” followed by two digits, which will idenfy the error. Proceed by turn o the oven and un-plug it, wait for a few minutes, and then reconnect it. If the error disappears, you can resume using the oven. If it doesn’t, call customer service and com

municate the code (ERXX) you see on the display.

8.1. APPLIANCE DISPOSAL This appliance is labelled in accordance with European Direcve 2012/19/EU regarding electric and electronic appliances (WEEE). The WEEE contain both pollung substances (that can have a negave eect on the environment) and base elements (that can be re

used). It is important that the WEEE undergo specic treatments to correctly remove and dispose of the pollutants and recover all the materials. Individuals can play an important role in ensuring that the WEEE do not become an envi

ronmental problem; it is essenal to follow a few basic rules: ശ the WEEE should not be treated as domesc waste; ശ the WEEE should be taken to dedicated collecon areas managed by the town council or a registered company. ln many countries, domesc collecons may be available for large WEEEs. When you buy a new ap

pliance, the old one can be returned to the vendor who must accept it free of charge as a one-o, as long as the appliance is of an equivalent type and has the same funcons as the purchased appliance. Where possible, avoid pre-heang the oven and always try to ll it. Open the oven door as infrequently as possible, because heat from the cavity disperses every me it is opened. For a signicant energy saving, switch o the oven between 5 and 10 minutes before the planned end of the cooking me, and use the residual heat that the oven connues to generate. Keep the seals clean and in order, to avoid any heat dispersal outside of the cavity. lf you have an elec

tric contract with an hourly tari, the “delayed cooking” programme makes energy saving simpler, moving the cooking process to start at the reduced tari me slot.

power cord 1100 power cord

Back view Side viewINSTALLATION You can view the product installaon video by scanning the Qr Code or by clicking this linkEN 53 INSTALLATION

COMMENT INTERAGIR AVEC L’APPLICATION

NOTE: several parameters cannot be set at the same me, therefore only the last set remains in the memory while the previous one is deleted. Symbol Funcon Descripon

Baking tray Baking tray

2. PRODUCTINTRODUCTIE

4. WERKING VAN HET PRODUCT

ALGEMENE WAARSCHUWINGEN

2. PRODUCTINTRODUCTIE

WERKING VAN HET PRODUCT

4. WERKING VAN HET PRODUCT

WERKING VAN HET PRODUCT

WERKING VAN HET PRODUCT

WERKING VAN HET PRODUCT

WERKING VAN HET PRODUCT

WERKING VAN HET PRODUCT

WERKING VAN HET PRODUCT

WERKING VAN HET PRODUCT

WERKING VAN HET PRODUCT

WERKING VAN HET PRODUCT

25–35 Yorkshire pudding

20-35 Lasanha, fresca

INSTALACECS 51 INSTALACECS 52

4.1. KAIP GAMINYS VEIKIA

4.1. KAIP GAMINYS VEIKIA

Pagaritooted 200 °C Metallrest

Pagaritooted 200 °C Metallrest

Pagaritooted 200 °C Metallrest