SBHS 45 B2 - Hair dryer brush SILVERCREST - Free user manual and instructions

Brand	SilverCrest
Model	SBHS 45 B2
Product type	Hair blow-dry brush
Power supply	220-240 V ~ 50-60 Hz
Power	45 W
Protection class	II
Temperature levels	2 levels: level 1 ~150 °C, level 2 ~180 °C
Automatic shut-off	After 30 minutes of operation
LED indicators	LED for temperature level (1 or 2)
Brush	Rotating round brush with insulated tip
Cable length	Not specified (swivel cable)
Included accessories	Carrying bag, instruction manual
Weight	Approx. 300 g (estimated)
Usage	Damp or dry hair for straightening and waves
Care and cleaning	Remove hair with fingers, wipe with a damp cloth
Safety	Do not use near water, automatic shut-off, insulated tip
Warranty	3 years
Repairability	Repairs only by a specialized workshop or service center
Article number (IAN)	373826_2104
Customer service France	0800 919270, [e-mail]

Frequently Asked Questions - SBHS 45 B2 SILVERCREST

How to use the SilverCrest SBHS 45 B2 blow-dry brush?

Plug in the appliance, use the On/Off switch to select the temperature level (1 or 2). Preheat for 5 minutes. To straighten, wrap a section of hair around the brush and brush from roots to ends. For waves, wrap the section starting from the ends, hold for 10 seconds, then press the release button to free the brush. Let it cool before styling.

What temperature levels are available?

The appliance offers two temperature levels: level 1 (approx. 150 °C) and level 2 (approx. 180 °C). A green LED lights up for level 1, and two LEDs for level 2.

Does the appliance switch off automatically?

Yes, the appliance has an automatic shut-off after 30 minutes of operation on levels 1 or 2. The LEDs blink 25 minutes before to warn. To use it again, set the switch to 0 and then to the desired level.

Can the blow-dry brush be used on wet hair?

Hair should be dry or slightly damp, but not dripping wet. Use heat-protective styling products, such as a heat protectant spray.

How to clean the blow-dry brush?

Unplug the appliance and let it cool. Remove hair caught in the brush bristles with your fingers. Wipe the appliance with a slightly damp cloth. Do not use corrosive or abrasive detergents.

Is the appliance safe in the bathroom?

The appliance must not be used near bathtubs, showers, washbasins or other containers filled with water. Unplug it after use even if switched off. Never immerse the appliance in water.

What to do if the appliance stops working?

First check the power supply and that the appliance is not in automatic shut-off mode (set to 0 then to a level). If the problem persists, do not attempt to repair it yourself; contact customer service at 0800 919270 (France) or [e-mail].

What is the warranty for the SilverCrest blow-dry brush?

The appliance has a 3-year warranty from the date of purchase. Keep the receipt. In case of defects, contact customer service with the IAN number 373826_2104. The warranty covers material and manufacturing defects, excluding wear parts.

Can the brush be used on damaged or colored hair?

Yes, but with caution. Very fine or damaged hair (colored, bleached, permed) reacts faster to heat. Use a thicker section, a lower temperature (level 1) and a shorter exposure time to avoid damaging the hair.

How to store the appliance after use?

Let the appliance cool completely. Do not wrap the cord around the appliance. Use the hanging loop to suspend it or store it in the provided carrying bag. Avoid extreme temperatures (below -10 °C or above +40 °C).

USER MANUAL SBHS 45 B2 SILVERCREST

6B Operating instructions

MULTI HAIR STYLER

For EU market: Imported for GB market by:

HOYER Handel GmbH Lidl Great Britain Ltd

Taskopsträba 3 Lidl House - 14 Kingston Road

22761 Hamburg Surbon - KTS 9NU

GERMANY

Stand der Informationen - Status of information - Version des informations. Stand von de informatie
Stan informaci - Stav informaci - Stav informaci - Estado do las informaciones - Informaciones stand: 09/2021 ID: SBHS 45 B2_21_V1_2

IAN 373826_2104 IAN 373826_2104

Deutsch. 2
English. 12
Francais 22
Nederlands. 36
Polski 48
Cesky 60
Slovencina 70
Espanol. 80
Dansk 92

Übersicht / Overview / Aperçu de l'appareil / Overzicht / Prü眩glad / Přehled / Prehlad / Vista general / Oversigt

Inhalt

1. Overview 12
2. Intended purpose 13
3. Safety information 14
4. Items supplied 16
5. Operation 16

5.1 Switching on/off and selecting the temperature setting 16
5.2 Notes on styling and temperature selection 16
5.3 Styling 17
5.4 Switching off automatically 17

1. Cleaning 17

2. Storage 18

3. Disposal 18
4. Trouble-shooting 18
5. Technical specifications 18
6. Warranty of the HOYER Handel GmbH 19

1. Overview

Insulated tip (stays moderately warm and can be touched)
2 Rotating round brush
3 0/1/2 On/off switch and temperature controller
4 LED, is lit additionally when temperature setting 2 is selected
5 LED, is lit when temperature setting 1 is selected
6 Eyelet for hanging
7 Mains power cable with mains plug (360^ rotating)
8 Handle
9 Release button

no image: transport bag

Thank you for your trust!

Congratulations on your new multi hair styler.

For safe handling of the product and in order to get to know the entire range of features:

• Read these user instructions thoroughly prior to initial use.
• Above all, observe the safety information!
• The device should only be used as described in this copy of the user instructions.
• Keep this copy of the user instructions for reference.
• If you pass the device on to someone else, please include this copy of the user instructions. The user instructions are a part of the product.

We hope you enjoy your new multi hair styler!

2. Intended purpose

The multi hair styler is designed exclusively for styling your own real, human head hair. The device is designed for private home use and must not be used for commercial purposes.

The device must only be used indoors.

Foreseeable misuse

WARNING! Risk of injury!

Do not dry other parts of the body, animals or objects with the multi hair styler. Do not use the device for artificial hair or hair extensions.

Symbols on your device

Do not use this device in the vicinity of bathtubs, showers, washbasins or other containers containing water.

3. Safety information

Warnings

If necessary, the following warnings are used in this copy of the user instructions:

DANGER! High risk: failure to observe this warning may result in injury to life and limb.

WARNING! Moderate risk: failure to observe this warning may result in injury or serious material damage.

CAUTION: low risk: ignoring this warning may result in minor injuries or damage to property.

NOTE: circumstances and specifics that must be observed when handling the device.

Instructions for safe operation

• This device can be used by children from the age of 8 and people with restricted physical, sensory or intellectual abilities or a lack of experience or knowledge if they are supervised or have been instructed in how to use this device safely and if they have understood the resulting dangers. Children must not play with the device. Cleaning and user maintenance must not be performed by children unless they are supervised.

• If the multi hair styler is used in a bathroom, unplug it after use. The proximity of water represents a hazard even when the device is switched off.

Do not use this device in the vicinity of bathtubs, showers, washbasins or other vessels containing water.

• If the mains power cable of this device should become damaged, it must be replaced by the manufacturer, the manufacturer's customer service department or a similarly qualified specialist, in order to avoid any hazards.

• Installation of a residual current device (FI/RCD) with a rated residual operating current of no more than 30mA is recommended to provide additional protection. Ask your electrician for advice. The installation should only be carried out by a qualified electrician.

DANGER for children!

• Packing materials are not children's toys. Children should not be allowed to play with the plastic bags. There is a risk of suffocation.

DANGER to and from pets and livestock!

• Electrical devices can represent a danger to pets and livestock. In addition, animals can also cause damage to the device. For this reason you should keep animals away from electrical devices at all times.

DANGER! Risk of electric shock due to moisture!

• Never place the device anywhere that it could fall into water while plugged in.
• Protect the device from moisture, water drops and water splashes.
  The device, the cable and the mains plug must not be immersed in water or any other liquids.
• If liquid gets into the device, disconnect the mains plug immediately. Have the device checked before reusing.
• If the device has fallen into water, pull out the mains plug immediately, and only then remove the device from the water. Do not use the device again, and have it checked by a specialist workshop.
• Never touch the device with wet hands.

DANGER! Risk of electric shock!

Do not use the device if the device or the power cable has any visible damage, or if the device has previously been dropped.
- Lay the power cable such that no one can step on it, get caught on it, or trip over it.
- Only connect the mains plug to a properly installed and easily accessible wall socket whose voltage corresponds to the specifications on the rating plate.

The wall socket must still be easily accessible after connection.

• Ensure that the power cable cannot be damaged by sharp edges or hot spots. Do not wrap the power cable around the device (Danger! Risk of cable damage!).
  Ensure that the power cable cannot be trapped or crushed.
  To pull the mains plug out of the wall socket, always pull on the mains plug, and never on the power cable.
  Pull the mains plug out of the wall socket:

• after every use

• when a malfunction occurs
• when you are not using the device
• before you clean the device
• during thunderstorms

Make sure that the mains plug cannot be plugged in again during cleaning.
In order to avoid any hazards, do not make modifications to the device. You also must not replace the power cable yourself. Repairs must be carried out by a specialist workshop or the Service Centre.

DANGER - Fire hazard!

• Never leave the device unattended while it is plugged in.
• Never cover the device or place it on soft objects (e.g. towels).
  Do not use the device in the vicinity of flammable gases such as the spray jet of hairspray.

DANGER! Risk of injury through burning!

Do not touch the hot round brush. Only touch the device by the handle and the insulated tip.
Let the device cool down until it is warm to the touch before transporting, cleaning or placing it in the transport bag.

Make sure that one section of hair is not wrapped around the hot round brush for too long. The hair can be damaged.

WARNING! Risk of material damage!

• Never place the device on hot surfaces (e.g. hot plates) or near heat sources or open fire.
  Do not clean using sharp objects or abrasive cleaning agents.
  Do not expose the device to temperatures below -10^ or above +40^ .

4. Items supplied

1 hair styler
1 transport bag
1 copy of the user instructions

Before using for the first time

• Remove all packing material.
• Check that the device is undamaged.

5. Operation

NOTE: before using the device for the first time, place it on a heat-resistant surface and switch it on for approx. 15 minutes at temperature setting 2. As a result of the manufacturing process, you may notice a slight odour. This is normal and only occurs during first use. Ensure that the room is well ventilated.

5.1 Switching on/off and selecting the temperature setting

1. Check that the on/off switch and temperature control 3 are set to O (off).

2. Connect the mains plug 7 with an easily accessible wall socket. The wall socket must still be easily accessible after connection.

3. Use the on/off switch and temperature control 3 to switch on the device and select the desired temperature setting:

0 off
1	lower temperature (the LED 5 is lit)
2	higher temperature (both LEDs 4 and 5 are lit)

1. Place the device on a heat-resistant surface and allow the device to preheat for at least 5 minutes.

NOTE: you can also use the thermo-coated inside of the transport bag as a base.

1. After styling, turn the on/off switch and temperature control 3 to 0 (off) and disconnect the mains plug 7.

2. Allow the device to cool down.

5.2 Notes on styling and temperature selection

DANGER! Risk of injury through burning!

• Do not touch the hot round brush 2. Only touch the device by the handle 8 and the insulated tip 1.
  Make sure that one section of hair is not wrapped around the hot round brush 2 for too long. The hair can be damaged.

• The thinner the parted strand of hair, the faster and more intense the heat exposure.

• Note that very fine and damaged hair reacts particularly quickly and sensitively to the effects of heat. Hair is stressed, for example, by dyeing, bleaching, perming or permanent straightening.

The more sensitive hair is,

• the thicker the strand of hair should be
• the lower the temperature should be and
• the shorter the time of exposure to heat should be.

The shaping of hair is even stronger,

• the thinner the parted strand of hair
• the higher the temperature
• the longer you apply the heat.

5.3 Styling

Preparation

1. The hair should be dry or slightly damp. It must not be dripping wet.
2. Only use styling products that are intended for use with heat, for example heat protection products.
3. Comb or brush the hair thoroughly. Ensure that there are no knots in the hair.

Straightening

1. Part a strand of hair to the desired thickness.
2. Figure B: hold the strand of hair by the tip and place the strand over the round brush 2.
3. Glide the round brush 2 slowly and evenly from the hairline to the tips of the hair.
4. Repeat these steps strand by strand.
5. For better durability, allow your hair to cool briefly before you finish styling.

Waves

1. Part a strand of hair to the desired thickness.
2. Figure C: roll up the strand of hair from the tips over the round brush 2.
3. Hold this position for approx. 10 seconds.

NOTE: this time varies depending on the length and structure of the hair and the temperature setting.

1. Figure A: press and hold the release button 9 to release the round brush 2.
2. Slowly roll out the round brush 2 towards the ends of the hair.
3. Repeat these steps strand by strand.
4. For better durability, allow your hair to cool briefly before you finish styling.

5.4 Switching off automatically

The device is secured against accidental continuous operation by automatic switchoff.

After 30 minutes of use at temperature setting 1 or 2, the device switches itself off. After 25 minutes, flashing LEDs 4/5 will remind you of the automatic switch-off.

To use the device again, set the on/off switch and temperature control 3 once to 0 and then to one of the two temperature settings.

6. Cleaning

DANGER!

Pull the mains plug 7 out of the wall socket and allow the device to cool down before cleaning it.

WARNING! Risk of material damage!

Do not clean using sharp objects or abrasive cleaning agents.

• Clean the device regularly.

• Hairs that are tangled in the bristles of the round brush 2 should ideally be pulled off using your fingers.

• Wipe down the housing of the device with a damp cloth.

7. Storage

WARNING! Risk of material damage!

• Do not wrap the cable around the device (risk of cable damage!).

• The eyelet 6 allows you to hang the device safely and conveniently for storage.

• For transport, you can stow the device in the transport bag supplied.

8. Disposal

This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires sep

arate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products identified with this symbol may not be discarded with normal household waste, but must be taken to a collection point for recycling electric and electronic appliances.

This recycling symbol marks e.g. an object or parts of the material as valuable for recyc- cling. Recycling helps to reduce the consumption of raw materials and protect the envi

Packaging

When disposing of the packaging, make sure you comply with the environmental regulations applicable in your country.

9. Trouble-shooting

If your device fails to function as required, please try this checklist first. Perhaps there is only a minor problem, and you can solve it yourself.

DANGER! Risk of electric shock!

Do not attempt to repair the device yourself under any circumstances.

Fault	Possible causes / action
No func-tion	Has the device been con- nected to the power supply?
The device has switched off.	After 30 minutes, the device switches off automatically. This is a safety function. Switch the device off and on again. You can continue working immediately.
Hair is steaming	This only happens when the hair is not yet completely dry. The effects of the heat cause the moisture to evapo-rate.

10. Technical specifications

Model: SBHS 45 B2
Mains voltage: 220 - 240 V ~ 50 - 60 Hz
Protection class: II	□
Power rating: 45 W
Heating level 1	approx. 150 °C
2	approx. 180 °C

Symbols used

Double insulation

Geprüfte Sicherheit (certified safety): devices must comply with the generally acknowledged rules of technology and the German Product Safety Act (Produkt-sicherheitsgesetz - ProdSG). (Not for UK)

With the CE marking, HOYER Handel GmbH declares the conformity with EU guidelines.

This symbol reminds you to dispose of the packaging in an environmentally friendly manner.

Recyclable materials are marked with the recycling symbol (3 arrows). The material can be specified by the recycling number in the centre (here: 21) and/or an abbreviation (here: PAP).

AC voltage

It is a recyclable product which is subject to an extended producer responsibility and for which the rules of waste separation apply.

Subject to technical modifications.

11. Warranty of the HOYER Handel GmbH

Dear Customer,

your device is provided with a 3 year warranty starting with the purchase date. In the event of product defects, you are entitled to statutory rights against the vendor. These statutory rights are not restricted by our warranty presented in the following.

Warranty conditions

The warranty period starts with the purchase date. Please keep the original purchase receipt in a safe place. This document is required to verify the purchase.

If within three years from the purchase date of this product a material or factory defect occurs, the product will be repaired or replaced by us - at our discretion - free of charge to you, or the purchase price will be refunded. This warranty implies that within the period of three years the defective device and the purchase receipt are presented, including a brief written description of the defect and the time it occurred.

If the defect is covered by our warranty, the repaired or a new product will be returned to you. No new warranty period starts with a repair or replacement of the product.

Warranty period and statutory claims for defects

The warranty period is not extended when the warranty has been claimed. This also applies to replaced and repaired parts. Any damages and defects already existing at the time of purchase must be reported immediately upon unpacking. Repairs arising after the expiration of the warranty period are subject to a charge.

Warranty coverage

The device was produced carefully according to strict quality guidelines and tested diligently prior to delivery.

The warranty applies to material or factory defects.

Excluded from the warranty are wear parts subject to normal wear and damages to fragile parts, e.g. switches, batteries, lamps or other parts manufactured from glass.

This warranty expires if the product is damaged, not used as intended or not serviced. For the proper operation of the product, all instructions listed in the operating instructions must be observed carefully. Any form of use and handling that is advised against in the operating instructions or warned against must always be avoided.

The product is only intended for private and not for commercial use. In the case of incorrect and improper treatment, use of force and interventions not performed by our authorised Service Centre, the warranty shall cease.

Handling in case of a warranty claim

In order to ensure prompt processing of your matter, please observe the following notes:

• Please keep the article number

IAN: 373826_2104 and the purchase receipt as a purchase verification for all inquiries.

• The article number can be found on the rating plate, an engraving, the title page of your instructions (in the bottom left), or as a label on the rear or underside of the device.
• If faulty operation or other defects occur, first contact the Service Centre listed in the following by telephone or email.
• Then, you are able to send a product reported as defective free of charge to the service address specified to you, including the purchase receipt and the information on the defect and when it occurred.

At www.lidl-service.com you can download this and many other manuals, product videos and installation software.

This QR code takes you directly to the Lidl Service website (www.lidl-service.com), where you can enter the article number (IAN)

373826_2104 to open your user instructions.

Service Centre

GB Service Great Britain

Tel.: [phone]

E-Mail: [e-mail]

IE Service Ireland

Tel.: [phone]

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (off peak))

E-Mail: [e-mail]

MT Service Malta

Tel.: [phone]

E-Mail: [e-mail]

CY Service Cyprus

Tel.: [phone]

E-Mail: [e-mail]

IAN: 373826_2104

Supplier

Please note that the following address is no service address. First contact the aforementioned Service Centre.