PARKSIDE PDSLG 12 A1 - Battery charger

PDSLG 12 A1 - Battery charger PARKSIDE - Free user manual and instructions

Find the device manual for free PDSLG 12 A1 PARKSIDE in PDF.

📄 110 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice PARKSIDE PDSLG 12 A1 - page 21
Pick your language and provide your email: we'll send you a specifically translated version.
Brand Parkside
Model PDSLG 12 A1
Product type Dual fast charger for lithium-ion batteries
Input voltage 220-240 V ~, 50-60 Hz
Power consumption 150 W
Internal fuse 3.15 A
Output voltage (per channel) 12 V
Output current (per channel) 4.5 A
Number of channels 2
Compatible batteries Parkside PAPK 12 A1 / A2 / B1 (X12V Team series)
Charging time (PAPK 12 A1 2 Ah) 60 min
Charging time (PAPK 12 A2 2 Ah) 45 min
Charging time (PAPK 12 B1 4 Ah) 60 min
LED indicators Red (charging), Green (charged)
Protection Double insulation (class II), overload and short-circuit protection
Use Indoor use only
Recommended charging temperature 10 °C to 40 °C
Dimensions (approximate) Approximately 200 x 100 x 60 mm
Weight (approximate) Approximately 500 g
Maintenance and cleaning Disconnect before cleaning. Clean with a dry or slightly damp cloth. Do not use water.
Replacement parts Power cord replaceable only by the manufacturer
Warranty 3 years
Repairability Have any repairs carried out by an authorized after-sales service

Frequently Asked Questions - PDSLG 12 A1 PARKSIDE

Which batteries can I charge with the PDSLG 12 A1?
This charger is compatible with Parkside PAPK 12 A1, PAPK 12 A2, and PAPK 12 B1 batteries from the X12V Team series.
How long does it take to charge a battery?
Charging time varies by capacity: 60 min for a 2 Ah battery (PAPK 12 A1), 45 min for a 2 Ah battery (PAPK 12 A2), and 60 min for a 4 Ah battery (PAPK 12 B1) with a current of 4.5 A.
What do the LEDs on the charger mean?
The red LED indicates that charging is in progress. The green LED lights up when the battery is fully charged and ready to use.
Can I charge two batteries at the same time?
Yes, the dual charger can charge two batteries simultaneously, each with its own 4.5 A channel.
What safety precautions should I follow?
Use only indoors. Do not charge non-rechargeable batteries. Protect the charger from moisture and heat. Always disconnect before removing the battery. If the cable is damaged, have it replaced by the manufacturer.
How do I maintain the charger?
Disconnect the power plug before cleaning. Clean the device with a dry or slightly damp cloth. Never use water or abrasive products.
What should I do if the charger does not work?
First check the internal fuse (3.15 A). If the problem persists, contact Parkside customer service at 0800 919270 (France) or via kompernass@lidl.fr.
Can I use the charger for other brands of batteries?
No, the charger is designed exclusively for Parkside batteries of the X12V Team series. Using other batteries may pose a fire risk.
How should I store the charger when not in use?
Store it in a clean, dry place away from direct sunlight. If storing a battery, maintain a charge between 50% and 80% in a cool place (0-50 °C).
Is the charger covered by a warranty?
Yes, the Parkside PDSLG 12 A1 charger has a 3-year warranty from the date of purchase. Keep the receipt as proof.

User questions about PDSLG 12 A1 PARKSIDE

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Battery charger in PDF format for free! Find your manual PDSLG 12 A1 - PARKSIDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PDSLG 12 A1 by PARKSIDE.

USER MANUAL PDSLG 12 A1 PARKSIDE

Translation of the original instructions

NL BE

DUBBELE OPLADER

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

FR BE

GB / IE Translation of the original instructions Page 15

All Parkside tools and the chargers PLGK 12 A1 / PLGK 12 B2 / PDSLG 12 A1 of the X12V Team series are compatible with the PAPK 12 A1 / PAPK 12 A2 / PAPK 12 B1 battery pack.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Entsorgung

General safety instructions 17

Use and handling of the cordless electrical power tool 18
Extended safety guidelines. 19
Safety guidelines for battery chargers 19

Before use. 20

Charging the battery pack. 20

Cleaning. 21

Maintenance and storage 21

Kompernass Handels GmbH warranty 22

Service. 24

Importer 25

Disposal. 25

Notes on the EC Declaration of Conformity 27

Ordering a replacement battery. 28

Telephone ordering 28

Introduction

Congratulations on the purchase of your new appliance. You have chosen a high-quality product. The operating instructions are part of this product. They contain important information about safety, usage and disposal. Before using the product, please familiarise yourself with all the operating and safety instructions. Use the product only as described and for the range of applications specified. Please also pass these operating instructions on to any future owner.

Intended use

This charger is designed exclusively for charging PARKSIDE PAPK 12 A1/A2/B1 series batteries. This rechargeable battery is suitable for:

PARKSIDE PDSLG 12 A1 - Intended use - 1

This appliance is not intended for commercial applications. Any other usage or modification of the appliance is deemed to be improper and carries a significant risk of accidents. The manufacturer accepts no responsibility for damage attributable to misuse.

Features

Red charge control LED
Green charge control LED
3 Dual high-speed charger

Package contents

1 double battery charger
1 set of operating instructions

Technical data

Dual high-speed charger: PDSLG 12 A1

INPUT:

Rated voltage: 220-240 V (AC), 50 - 60Hz

Rated power consumption: 150 W

Fuse (internal): 3.15 A

OUTPUT 1:

Rated voltage: 12V (DC)

Rated current: 4.5 A

Charging time: see table on fold-out page

Protection class: II / (double insulation)

OUTPUT 2:

Rated voltage: 12 V = = (DC)

Rated current: 4.5 A

Charging time: see table on fold-out page

Protection class: II/ (double insulation)

PARKSIDE PDSLG 12 A1 - Dual high-speed charger: PDSLG 12 A1 - 1

PARKSIDE PDSLG 12 A1 - Dual high-speed charger: PDSLG 12 A1 - 2

General safety instructions

PARKSIDE PDSLG 12 A1 - General safety instructions - 1

WARNING!

  • Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.

Use and handling of the cordless electrical power tool

a) Charge a rechargeable battery unit using only the charger recommended by the manufacturer. Chargers are often designed for a particular type of rechargeable battery unit. There is the danger of fire if other types of rechargeable battery units are used.
b) Only the rechargeable battery units supplied are to be used with an electrical power tool. The use of other rechargeable battery units may lead to the danger of injury or fire.
c) When they are not being used, store rechargeable battery units away from paperclips, coins, keys, nails, screws or other small metal objects that could cause the contacts to be bridged. Short-circuiting the contacts of a rechargeable battery unit may result in heat damage or fire.
d) Fluids may leak out of rechargeable battery units if they are misused. If this happens, avoid contact with the fluid. If contact occurs, flush the affected area with water. Seek additional medical help if any of the fluid gets into your eyes. Escaping battery fluid may cause skin irritation or burns.

PARKSIDE PDSLG 12 A1 - Use and handling of the cordless electrical power tool - 1

ON! RISK OF EXPLOSION!

Never charge non-rechargeable batteries.

Protect the rechargeable battery from heat (for example, from continuous exposure to sunlight), fire, water and moisture. There is a risk of explosion.

PARKSIDE PDSLG 12 A1 - ON! RISK OF EXPLOSION! - 1

PARKSIDE PDSLG 12 A1 - ON! RISK OF EXPLOSION! - 2

PARKSIDE PDSLG 12 A1 - ON! RISK OF EXPLOSION! - 3

Extended safety guidelines

  • Do not use a damaged or modified battery. Damaged or modified batteries may behave unexpectedly and cause fires, explosions or represent a risk of injury.
  • Do not expose a battery to fire or excessively high temperatures. Fire or temperatures in excess of 130^ C ( 265^ F ) can cause an explosion.
  • Follow all instructions regarding charging and never charge the battery or the cordless tool outside the temperature range specified in the operating instructions.

Incorrect charging or charging outside of the permissible temperature range can destroy the battery and increase the risk of fire.

PARKSIDE PDSLG 12 A1 - Extended safety guidelines - 1

WARNING!

  • Do not use any accessories which have not been not recommended by PARKSIDE. This can lead to electric shocks or fire.

Safety guidelines for battery chargers

This appliance may be used by children aged 8 years and above and by persons with limited physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are under supervision or have been told how to use the appliance safely and are aware of the potential risks. Do not allow children to play with the appliance. Cleaning and user maintenance tasks may not be carried out by children unless they are supervised.

To avoid potential risks, damaged mains cables should be replaced by the manufacturer or the manufacturer's customer service department or a similarly qualified person.

PARKSIDE PDSLG 12 A1 - Safety guidelines for battery chargers - 1

The charger is suitable for indoor use only.

PARKSIDE PDSLG 12 A1 - Safety guidelines for battery chargers - 2

WARNING!

To avoid potential risks, damaged mains cables should be replaced by the manufacturer or the manufacturer's customer service department or a similarly qualified person.

PARKSIDE PDSLG 12 A1 - WARNING! - 1

ATTENTION!

This charger can only charge the following batteries: PAPK 12 A1 / PAPK 12 A2 / PAPK 12 B1.
An up-to-date battery compatibility list can be found at www.lidl.de/Akku.

Before use

Charging the battery pack

PARKSIDE PDSLG 12 A1 - Charging the battery pack - 1

CAUTION!

Always unplug the appliance before you remove the battery pack from or connect the battery pack to the charger.

NOTE

  • Never charge the battery pack at an ambient temperature of below 10^ or above 40^ . If a lithium-ion battery is going to be put into storage for an extended period, the charge level should be checked at regular intervals. The optimum charge level is between 50% and 80% . The storage climate should be cool and dry, and the ambient temperature should be between 0^ and 50^ .

Insert one or two battery packs into the dual high-speed charge. 3
Plug the mains plug into the mains power socket. The respective charge control LED 1 lights up red.
The respective green charge control LED2 indicates that charging is complete and the battery pack is ready for use.
You should always switch the dual high-speed chargeoff for at least 15 minutes between successive charging processes. Also disconnect the power plug from the mains power socket.

Cleaning

PARKSIDE PDSLG 12 A1 - Cleaning - 1

CAUTION!

Always unplug the charger before cleaning it.
Do not clean the charger with water.

Clean the appliance with a dry or slightly moistened cloth.

Maintenance and storage

If you do not intend to use the appliance for an extended period, remove the batteries and store it in a clean, dry place away from direct sunlight.
If a lithium-ion battery is going to be put into storage for an extended period, the charge level should be checked at regular intervals. The optimum charge level is between 50% and 80% . The optimum storage environment is cool and dry.

Never try to repair damaged batteries.

Batteries should only be maintained by the manufacturer or an approved customer service centre.

This appliance has a 3-year warranty valid from the date of purchase. If this product has any faults, you, the buyer, have certain statutory rights. Your statutory rights are not restricted in any way by the warranty described below.

Warranty conditions

The warranty period starts on the date of purchase. Please keep your receipt in a safe place. This will be required as proof of purchase.

If any material or manufacturing fault occurs within three years of the date of purchase of the product, we will either repair or replace the product for you or refund the purchase price (at our discretion). This warranty service requires that you present the defective appliance and the proof of purchase (receipt) within the three-year warranty period, along with a brief written description of the fault and of when it occurred.

If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.

Warranty period and statutory claims for defects

The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery.

The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or to fragile parts which could be considered as consumable parts such as switches, batteries or parts made of glass.

The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided.

This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force and modifications / repairs which have not been carried out by one of our authorised Service centres.

The warranty period does not apply to

Normal reduction of the battery capacity over time
Commercial use of the product
Damage to or alteration of the product by the customer
Non-compliance with safety and maintenance instructions, operating errors
Damage caused by natural hazards

Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

Please have the till receipt and the item number (e.g. IAN 12345) available as proof of purchase.
- You will find the item number on the type plate on the product, an engraving on the product, on the front page of the operating instructions (below left) or on the sticker on the rear or bottom of the product.

If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
- You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

PARKSIDE PDSLG 12 A1 - Warranty claim procedure - 1

You can download these instructions along with many other manuals, product videos and installation software at www.lidl-service.com.

This QR code will take you directly to the Lidl service page

(www.lidl-service.com) where you can open your operating instructions by entering the item number (IAN) 123456.

Service

PARKSIDE PDSLG 12 A1 - Service - 1

WARNING!

Have your appliances repaired by the service centre or a trained electrician, using only original spare parts. This will ensure that the safety of the appliance is maintained.
Always ensure that the power plug or the mains cable is replaced only by the manufacturer of the appliance or by an approved customer service provider. This will ensure that the safety of the appliance is maintained.

GB

Service Great Britain

Tel.: 0800 404 7657

E-Mail: kompernass@lidl.co.uk

IE Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (off peak))

E-Mail: kompernass@lidl.ie

IAN 332973_1907

Importer

Please note that the following address is not the service address. Please use the service address provided in the operating instructions.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Disposal

The packaging protects the appliance from damage during transport. The packaging materials have been selected for their environmental friendliness and disposal attributes, and are therefore recyclable.

Returning the packaging into the material cycle conserves raw materials and reduces the amount of waste generated. Dispose of packaging materials that are no longer needed in accordance with applicable local regulations.

PARKSIDE PDSLG 12 A1 - Disposal - 1

dispose of power tools in your normal domestic waste!

European Directive 2012/19/EU requires worn-out power tools to be collected separately and recycled in an environmentally compatible manner.

PARKSIDE PDSLG 12 A1 - dispose of power tools in your normal domestic waste! - 1

Li-ion

dispose of batteries in your normal household waste!

Defective or worn-out rechargeable batteries must be recycled according to Directive 2006/66/EC. Take the battery pack and/or tool to a nearby collection facility.

Please consult your local authorities regarding suitable disposal of worn-out power tools/battery packs.

PARKSIDE PDSLG 12 A1 - dispose of batteries in your normal household waste! - 1

Dispose of the packaging in an environmentally friendly manner. Note the labelling on the packaging and separate the packaging material components for disposal if necessary. The packaging material is labelled with abbreviations (a) and numbers (b) with the following meanings: 1-7: plastics, 20-22: paper and cardboard, 80-98: composites

PARKSIDE PDSLG 12 A1 - dispose of batteries in your normal household waste! - 2

Your local community or municipal authorities can provide information on how to dispose of the worn-out product.

PARKSIDE PDSLG 12 A1 - dispose of batteries in your normal household waste! - 3

The product is recyclable, subject to extended producer responsibility and is collected separately.

Notes on the EC Declaration of Conformity

This appliance complies with the basic requirements and other relevant provisions of the Electromagnetic Compatibility Directive 2014/30/EU and the Low-Voltage Directive 2014/35/EU.

The complete original Declaration of Conformity is available from the importer.

CE

RoHS Directive (2011/65/EU)*

*The manufacturer bears the full responsibility for compliance with this conformity declaration. The subject matter of the declaration described above complies with the provisions of directive 2011/65/EU

of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

Ordering a replacement battery

If you want to order a replacement battery for your appliance, you can do so easily via the Internet on www.kompernass.com or by telephone. Due to limited stocks, this item may sell out in a relatively short time.

PARKSIDE PDSLG 12 A1 - Ordering a replacement battery - 1

NOTE

  • Online ordering of replacement parts might not be possible in some countries. In this case, please contact the Service hotline.

Telephone ordering

PARKSIDE PDSLG 12 A1 - Telephone ordering - 1

Service Great Britain

Tel.: 0800 404 7657

E-Mail: kompernass@idl.co.uk

PARKSIDE PDSLG 12 A1 - Service Great Britain - 1

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (off peak))

E-Mail: kompernass@lidl.ie

To ensure fast processing of your order, have the article number of your appliance to hand (e.g. IAN 332973) in case of questions. The article number can be found on the type plate or the title page of these instructions.

Table des matières

Introduction. 30

Chere cliente, cher client,

Chere cliente, cher client,

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

ALLEMAGNE

www.kompernass.com

Recyclage

Directive RoHS (2011/65/UE)*

Nominate spanning: 220 - 240 V ~ (wisselstroom), 50-60 Hz

Nominal vermogen: 150 W

Zekering (intern): 3,15 A

UITGANG 1/Output 1:

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

DUITSLAND

www.kompernass.com

Importeur

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Afvoeren

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

NIEMCY

www.kompernass.com

Utylizacja

PARKSIDE PDSLG 12 A1 - Utylizacja - 1

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

NÉMECKO

www.kompernass.com

Likvidace

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

NEMECKO

www.kompernass.com

Likvidácia

PARKSIDE PDSLG 12 A1 - Likvidácia - 1

hráni prístroi pred poskodením poças prepravy. Pri vybere obalovych materialov sa prihliadalo na ekologické hl'adisko a odborné moźnosti likvidácie, a preto ich možno recyklovat'.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : PARKSIDE

Model : PDSLG 12 A1

Category : Battery charger